ABW-02 SERIES AC/DC Power Module 2W FEATURES ►Small,encapsulated Module for PCB Mounting ►Universal Input 85-264VAC,47-440Hz ►Constant Power Mode ►Regulated Output Voltage 8,14 or 24VDC ►Models with additional 3.3 or 5VDC Output ►Operating Temp.Range -30°C to 70°C ►EMI meets EN55022,class B, FCC part15,Class B and EN55014-1 ►Safety Approval to UL/cUL/IEC/EN 60950-1,TUV IEC/EN 60335-1 ►3 Years Product Warranty PRODUCT OVERVIEW The ABW-02 series is a new range of small, fully encapsulated AC/DC power supply modules.They are designed for direct PCB mounting with solder pins.They feature regulated output voltages which have a constant output power mode instead of a conventional current limit characteristics,which makes the power modules suitable to drive relays,solenoids,capacitive loads and LED’s.To power logic circuits for standby functions models with an addtional second, voltage regulated 3.3 or 5VDC output are available. The ABW-02 power supply modules provide a cost-effective new solution for standby power applications in appliances and consumer electronics. equipment. Universal input voltage 85-264VAC and International safety approvals including IEC/EN60335-1 qualifies the product for worldwide markets. Model Selection Guide Model Number Output 1 Voltage VDC 8 14 24 8 8 14 14 ABW-02S08 ABW-02S14 ABW-02S24 ABW-02D83 *** ABW-02D85 *** ABW-02D143 *** ABW-02D145 *** * Io1+Io2≦250mA Output 2 Voltage Current Max. mA 250 143 83 * * ** ** VDC ------3.3 5 3.3 5 Current Max. mA ------160 250 70 83 Input Current Efficiency (typ.) @Max. Load mA(typ.) 42 40 39 43 43 43 43 @Max. Load % 72 74 76 69 69 70 70 ** Io1+Io2≦143mA *** The definition of output power (Po) for dual-output modules : Po=V01 x (I01 + I02 ) Input Specifications Parameter Input Voltage Range Input Frequency Range Input Voltage Range No-Load Power Consumption Input Surge Voltage Model Min. 85 47 120 ----- All Models Typ. ------30 --- Max. 264 440 370 --308 Unit VAC Hz VDC mW VAC Output Specifications Parameter Conditions Output 1 Output Voltage Accuracy Output 2 Output 1 Line Regulation Output 2 Output 1 Load Regulation Output 2 Ripple & Noise 0-20 MHz Bandwidth Short Circuit Protection Vin=115VAC, Full Load Vin=85~264VAC Io=10% to 100% Tel:886-6-2923150 Page 1 of 3 Typ. Max. Unit --- --- ±5.0 % --- --- ±2.0 % --- ±1.0 --- % --- ±0.3 --- % --- ±1.0 --- % --- ±0.5 --- % Output 1 --- 1 --- V P-P Output 2 --- 0.1 --- V P-P Continuous E-mail:[email protected] 2014/06/08 REV:2 Min. ABW-02 SERIES AC/DC POWER MODULE 2W General Specifications Parameter Conditions Min. Typ. Max. Unit Input to Output, 60 Seconds 3000 --- --- VAC --- 45 --- KHz MIL-HDBK-217F@25℃, Ground Benign 500,000 --- --- Hours I/O Isolation Voltage Switching Frequency MTBF (calculated) UL/cUL 60950-1 recognition(UL certificate) Safety Approvals IEC/EN 60950-1(CB-scheme) IEC/EN 60335-1 recognition(TUV certificata,CB-scheme) EMC Specifications Parameter Standards & Level Performance EN55014-1, EN55022, FCC part 15 EN55014-2 ,EN55024 ESD EN61000-4-2 air ± 8kV , Contact ± 4kV Radiated immunity EN61000-4-3 10V/m Fast transient EN61000-4-4 ±2kV Surge EN61000-4-5 ±1kV EN61000-4-6 10Vrms Conducted immunity EN61000-4-8 30A/M PFMF EN61000-4-11 30% 10ms Dips EN61000-4-11 >95% 5000ms Interruptions EMI EMS Class B A A A A A A A B Environmental Specifications Parameter Temperature Range (operational) Storage Temperature Range Humidity (non condensing) Cooling Conditions Ambient Min. -30℃ -40℃ --Free-Air convection Max. +70℃ +85℃ 95 % rel. H Notes 1 All specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage and after warm-up time rated output current unless otherwise noted. 2 These power modules require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage the power 3 We recommend to protect the converter by a slow blow fuse in the input supply line. 4 Other input and output voltage may be available, please contact factory. 5 Specifications are subject to change without notice. supplies however they may not meet all listed specifications. Typical Constant Power V/I Curve Output Voltage(VDC) 10 8 6 4 2 0 0 100 200 300 400 500 Output Current(mA) E-mail:[email protected] 2014/06/08 REV:2 Tel:886-6-2923150 Page 2 of 3 600 700 800 900 ABW-02 SERIES AC/DC POWER MODULE 2W Package Specifications Pin Connections 2x3.75 [2x0.15] Mechanical Dimensions Single Output 1 Dual Output NC 4 3 +Vout +Vout1 5 4 -Vout Common 5 NP Bottom View 0.80 [0.03] 2 34.2 [1.35] 3 14.00 [0.55] 25.25 [0.99] 2 Pin NC +Vout2 6 AC(N) 7 AC(L) 7.50 [0.30] 6 6.35 [0.25] 1 7 21.00 [0.83] 28.4 [1.12] 2.6 [0.10] ►All 3.2 [0.13] 14.8 [0.58] dimensions in mm (inches) ►Tolerance: ±0.5 ►Pin (±0.01) diameter 0.8 ±0.1 (0.03±0.004) Physical Characteristics Case Size : 34.2x28.4x14.8mm (1.35x1.12x0.58 inches) Case Material : Plastic resin (flammability to UL 94V-0 rated) Pin Material : Copper Alloy with Gold Plate Over Nickel Subplate Weight : 24g 18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: [email protected] Minmax Technology Co., Ltd. 2014/06/08 REV:2 Page 3 of 3