Tape Information www.vishay.com Vishay Siliconix 50 1. 3.50 ± 0.05 Ø 1.78 ± 0.05 ax. 5° m 0.30 8.00 +- 0.10 2.00 ± 0.05 ± 4.00 ± 0.10 0.20 ± 0.02 0. 10 1.75 ± 0.10 SC-89-L (SOT-666) Carrier Tape D Ø 0. 80 0.69 ± 0.05 4.00 ± 0.10 D ± 0. 05 5° m ax. 1.78 ± 0.05 D Notes (1) 10 sprocket hole pitch cumulative tolerance ± 0.2 mm. (2) Camber not to exceed 1 mm in 100 mm, also not to exceed 1.5 cm in 1 m actually. (3) Pocket position relative to sprocket hole measured. (4) Material: PS and C. (5) All dimension in millimeter unless specified. (6) Vishay part number must be labeled at all reels of carrier tape. (7) Surface resistivity: 104 to 1011 Ω. QUANTITY PER REEL T1 3000 ECN: C15-0527-Rev. F, 25-May-15 DWG: 93-5232-X Document Number: 72071 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revision: 25-May-15