Microwave Amplifier 22 to 23 GHz Model BX9823 FEATURES • High Gain: 21 dB: Typical • Reverse Bias Protection • Input Voltage Regulator • Laser Sealed Housing The Model BX9823 is standard high frequency amplifier covering 22 GHz to 23 GHz. This two stage design, utilizes an input voltage regulator to protect against fluctuations in supply voltage, reverse bias protection circuitry, and a laser sealed housing for the ultimate in environmental protection. This standard design may also be ordered in a screened MIL-STD-883 version as a model SX9823. All specification ratings are based on measurements in a 50 ohm system with a DC supply voltage tolerance of +/- 2%. Parameter Typical Min. / Max. Frequency Range Gain Gain Flatness (+/-) Gain Variation over Temp. Pout @ 1 dB Compression Input VSWR Output VSWR 3rd Order Output Intercept Point 2nd Order Output Intercept Point Noise Figure Supply Voltage Supply Current 22 to 23 GHz 19 to 23 dB 0.5 dB 1.0 dB 14 dBm 1.8:1 1.8:1 4.0 dB +12 to +15 volts 290 mA 22 to 23 GHz 18 dB / 24 dB 1.0 dB Max. 1.5 dB Max 13 dBm 2.0:1 Max. 2.0:1 Max. 5.0 dB +12 to +15 volts 300 mA Max. Revision: 6/6/2012 Housing Size RF Connectors Operating Case Temp. (Min./Max. Values) Typical values are measured at 25°C but not guaranteed. 0.89" L x 1.18" W x 0.46" H Gold Plated Pins or SMA Female 25°C to +75°C Maximum (No Damage) Ratings Storage Temperature Operating Temperature (Case) DC Voltage @ 25°C (Regulated) Input Drive @ 25°C (CW) -65°C to +125°C -40°C to +85°C +17 VDC +20 dBm Spectrum Microwave, Inc. • PH: 888.553.7531 • Fax: 888.553.7532 • Email: [email protected] • www.SpectrumMicrowave.com