B-Series Circuit Breaker Datasheet [pdf]

B-Series
B-Series
CIRCUIT BREAKER
Carling Technologies’ B-Series hydraulic magnetic circuit breakers are specifically designed for applications
requiring extra insulation and tongue and groove half-shell constructions. The B-Series carries global regulatory
safety approvals for spacing requirements and are ideal for use as general purpose as well as full load amp
applications. Available with various choices of time delays, terminals, actuator styles, with a wide range of
standard colors and imprinting.
1-6 poles; ratings from 0.02 to 50 amps, up to 277VAC or 80VDC; UL recognized, CSA, VDE -0642, TUV,
UL-1500, UL489A Listed
Product Highlights:
Meet CSA Standard 22.2 No. 100 for the
Generator & Welder markets
ŠŠ Extra insulation and tongue & groove half-shell
constructions
ŠŠ UL Recognized - UL Standard 508, 1077, 1500
ŠŠ UL Listed - UL Standard 489, 489A
ŠŠ CSA Accepted
ŠŠ TUV Certified
ŠŠ VDE Certified
ŠŠ
Typical Applications:
Power Supplies
ŠŠ Medical Equipment
ŠŠ Generators & Welders
ŠŠ Office Equipment
ŠŠ Control Panels
ŠŠ Marine
ŠŠ Military
ŠŠ
Carling Technologies, Inc.
60 Johnson Avenue, Plainville, CT 06062
Email: [email protected]
Application Support: [email protected]
Phone: 860.793.9281 Fax: 860.793.9231
www.carlingtech.com
2 | B-Series Circuit Breaker - General Specifications
Electrical
Maximum Voltage
Current Ratings
Standard Voltage Coils
Auxiliary Switch Rating
Insulation Resistance
Dielectric Strength
Resistance, Impedance
277VAC 50/60 Hz, 80VDC
Standard current coils: 0.100, 0.250, 0.500, 0.750, 1.00, 2.50, 5.00, 7.50, 10.0, 15.0, 20.0, 25.0, 30.0, 35.0, 40.0 and 50.0 amps. Other ratings available, see ordering scheme.
DC - 6V, 12V; AC - 120V, other ratings available, see ordering scheme.
SPDT; 10.1 AMPS - 250VAC,1.0A 65 VDC or 0.5A 80 VDC, 0.1 Amps
- 125VAC (with gold contacts).
VDE-1.0 Amp - 125VAC.
Minimum of 100 Megohms at 500 VDC.
UL, CSA-1500 V 50/60 Hz for one
minute between all electrically isolated terminals. B-Series circuit breakers comply with the 8mm spacing and 3750V 50/60 Hz dielectric requirements from hazardous voltage to operator accessible surfaces, between adjacent poles and from main circuits to auxiliary circuits per Publications EN 60950 and VDE 0805.
Values from Line to Load Terminal - based on Series Trip Circuit Breaker.
RESISTANCE PER POLE VALUES
from Line to Load Terminals
(Values Based on Series Trip Circuit Breaker)
CURRENT
TOLERANCE
(AMPS)
(%)
0.10 - 5.0
5.1 - 20.0
15
25
20.1 - 50.0
35
Pulse Tolerance Curves
Mechanical
Endurance
Trip Free
Trip Indication
Physical
Number of Poles
Internal Circuit Config.
Weight
Standard Colors
10,000 ON-OFF operations @ 6 per minute; with rated Current and Voltage.
All B-Series Circuit Breakers will trip on overload, even when Handle is forcibly held in the ON position.
The operating Handle moves positively to the OFF position when an overload causes the breaker to trip.
1 - 6 poles at 30 Amps or less. 1 and 2 poles at 31 Amps thru 50 Amps.
Series, (with or without auxiliary
switch), Shunt and Relay with current or voltage trip coils, Dual Coil, Switch Only (with or without auxiliary switch).
Approximately 65 grams/pole. (Approximately 2.32 ounces/pole.)
Housing- Black; Actuator - See Ordering Scheme.
Environmental
Designed and tested in accordance with requirements of
specification MIL-PRF-55629 & MIL-STD-202 as follows:
Shock
Vibration
Moisture Resistance
Salt Spray
Thermal Shock
Operating Temperature
Withstands 100 Gs, 6ms, sawtooth while carrying rated current per Method 213, Test Condition “I”. Instantaneous and ultra-short curves tested @ 90% of rated current.
Withstands 0.060” excursion from 10-55 Hz, and 10 Gs 55-500 Hz, at rated current per Method 204C, Test Condition A. Instantaneous and ultrashort curves tested at 90% of rated current.
Method 106D, i.e., ten 24-hour cycles @ + 25°C to +65°C, 80-98% RH.
Method 101, Condition A (90-95% RH @ 5% NaCl Solution, 96 hrs).
Method 107D, Condition A (Five cycles @ -55°C to +25°C to +85°C to +25°C).
-40° C to +85° C
*Manufacturer reserves the right to change product specification without prior notice.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
B-Series Circuit Breaker - General Specifications | 3
Electrical Tables
Table A: Lists UL Recognized & CSA Certified configurations and performance capabilities as a Component Supplementary Protector.
Notes:
1 Requires branch circuit backup with a UL LISTED Type K5 or RK5 fuse (15A minimum) at no more than 4 times the rating of the protector.
2 Same as note 1, except that backup fuse is limited to 80A maximum.
3 2 pole protector required (with one pole per power line) for: 250/125 VAC, 125/250 VAC and 208Y/120 VAC Power Systems. 1 pole protector required for : 125 VAC, 1Ø Power System.
4 Satisfies the requirements of clause 11.2.8.2.5 of CSA STD C22.2 No 100 for the use of supplementary protectors with portable generators.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
4 | B-Series Circuit Breaker - General Specifications
Electrical Tables
Table B: Lists UL Recognized, CSA, VDE & TUV Certified configurations & performance capabilities as a Component Supplementary
Protector.
Notes:
1 General Purpose Ratings for UL/CSA Only.
2 Requires branch circuit backup with a UL LISTED Type K5 or RK5 fuse (15A minimum) at no more than 4 times the rating of the protector.
3 Same as note 1, except that backup fuse is limited to 80 A maximum.
Table C: Lists UL Recognized, CSA Certified configurations and performance capabilities as Protectors, Supplementary for Marine
Electrical and Fuel Systems (CCN/Guide PEQZ2, File E75596). Ignition Protected per UL 1500. UL Classified Small Craft Electrical Devices,
Marine in accordance with ISO 8846 (CCN/Guide UZMK, File MQ1515) as Marine Supplementary Protectors.
Notes:
1 Available with special catalog number only (consult factory).
2 2 pole protector required (with one pole per power line) for: 250/125 VAC, 125/250 VAC and 208Y/120 VAC Power Systems. 1 pole protector required for : 125 VAC, 1Ø Power System.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
B-Series Circuit Breaker - General Specifications | 5
Table D: Lists UL Listed configurations and performance capabilities as Circuit Breakers for use in Communications Equipment (CCN/
Guide DITT, File E189195), under UL489A
Notes:
1 Parallel Pole Construction
Table E: Lists UL Listed (489) configuration and performance capabilities as a Molded Case Circuit Breaker.
B SERIES TABLE E : UL489 LISTED BRANCH CIRCUIT BREAKERS
VOLTAGE
CIRCUIT
CONFIGURATION MAX. RATING FREQUENCY PHASE
SERIES
SHUNT TRIP
DUAL COIL
CURRENT RATING
INTERRUPTING
CAPACITY (AMPS)
FULL LOAD AMPS
WITHOUT BACKUP
FUSE
CONSTRUCTION NOTES
120
50 / 60
1
0.10 - 30
5,000
1 Pole
120 / 240
50 / 60
1
0.10 - 30
5,000
2 Poles
120 / 240
50 / 60
1
0.10 - 30
5,000
2 or 3 Poles (1 Pole of a 3 Pole Unit is for Neutral Break)
120
50 / 60
1
0.10 - 30
5,000
1 Pole
120 / 240
50 / 60
1
0.10 - 30
5,000
2 Poles
120 / 240
50 / 60
1
0.10 - 30
5,000
2 or 3 Poles (1 Pole of a 3 Pole Unit is for Neutral Break)
Agency Certifications
UL Recognized
UL Standard 1077
Component Recognition Program as Protectors Supplementary (Guide CCN/QVNU2, File E75596)
CSA Accepted
Component Supplementary Protector under Class 3215 30, FIle 047848 0 000 CSA Standard C22.2 No. 235
UL Standard 508
Switches, Industrial Control
(Guide CCN/NRNT2, File E148683)
TUV Certified
EN60934, under License No. R72103448
UL Standard 1500
Protectors, Supplementary for Marine Electrical & Fuel Systems (Guide PEQZ2, File E75596) Ignition Protection
VDE Certified
EN60934, VDE 0642 under File
No. 10537
UL Listed
UL Standard 489
UL Standard 489A
Circuit Breakers, Molded Case,
(Guide DIVQ, File E129899)
Communications Equipment
(Guide CCN/DITT, File E189195)
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
6 | B-Series Circuit Breaker - Handle UL Recognized – Ordering Scheme
B A 3
1
Series
2
Actuator
B 0
4
Circuit
3
Poles
5
Aux/Alarm
Switch
10
450
6
Frequency
& Delay
7
Current Rating
9
Actuator
Color
10
Mounting/
Barriers
C
11
Agency
Approval
7 CURRENT RATING (AMPERES)
1 SERIES
B
CODEAMPERES
2 ACTUATOR
A
Handle, one per pole
B
Handle, one per multipole unit
S
Mid-Trip Handle, one per pole
T
Mid-Trip Handle, one per pole & Alarm Switch
3 POLES
1
One
2
Two
1 B 1
8
Terminal
3
4
4 CIRCUIT
A 2 Switch Only (No Coil)
B
Series Trip (Current)
C
Series Trip (Voltage)
3
D
Shunt Trip (Current)
E 3 Shunt Trip (Voltage)
F 3 Relay Trip (Current)
Three
Four
5
6
G 3 Relay Trip (Voltage)
H 3,4 Dual Coil with Shunt Trip
Voltage Coil K 3,4 Dual Coil with Relay Trip Voltage Coil
5 AUXILIARY / ALARM SWITCH 5 5 0
without Aux Switch
1
S.P.D.T., 0.093 Q.C. Term.
7
2
S.P.D.T., 0.110 Q.C. Term.
4 S.P.D.T., 0.110 Q.C. Term.
8
(Gold Contacts)
9
6 FREQUENCY & DELAY
03 2 DC 50/60Hz, Switch Only
10 6 DC Instantaneous
11 DC Ultra Short
12 DC Short
14 DC Medium
16 DC Long
20 6 50/60Hz Instantaneous
21 50/60Hz Ultra Short
22 50/60Hz Short
24 50/60Hz Medium
26 50/60Hz Long
Five
Six
S.P.S.T., 0.093 Q.C. Term.
(Gold Contacts)
S.P.S.T., 0.110 Q.C. Term.
(Gold Contacts)
S.P.S.T., 0.187 Q.C. Term.
S.P.D.T., 0.187 Q.C. Term.
30 DC, 50/60Hz Instantaneous
31 DC, 50/60Hz Ultra Short
32 DC, 50/60Hz Short
34 DC, 50/60Hz Medium
36 DC, 50/60Hz Long
42 7 50/60Hz Short, Hi-Inrush
44 7 50/60Hz Medium, Hi-Inrush
46 7 50/60Hz Long, Hi-Inrush
52 7 DC, Short,Hi-Inrush
54 7 DC, Medium, Hi-Inrush
56 7 DC, Long, Hi-Inrush
Notes:
1 Actuator Code:
A: Handle tie pin spacer(s) and retainers provided unassembled with multi-pole units.
B: Handle location as viewed from front of breaker:
2 pole - left pole
3 pole - center pole
4 pole - two handles at center poles
5 pole - three handles at center poles
6 pole - four handles at center poles
S: Handle moves to mid-position only upon electrical trip of the breaker. Available with circuit
codes B, C, D, E, F, G, H and K.
T: Handle moves to mid-position and alarm switch activates only upon electrical trip of the breaker. Available with circuit codes B & C.
2 Switch Only circuits, rated up to 50 amps and 6 poles, and only available with VDE Certification when tied to a protected pole (Circuit Code B, C, D or H.), For .02 to 30 amps,
select Current Code 630. For 35 - 50 amps, select Current Code 650.
3 Available with Terminal Codes 1, 2 and 3. Current Rating limited to 30 amps maximum.
4 Consult factory for available Dual Coil options, as special catalog number is required. With Shunt construction, Dual Coils will trip instantaneously on line voltage. Dual coils require 30VA minimum power to trip and are rated for intermittent duty only.
5 Auxiliary Switch breakers with Series Trip and Switch Only circuits. On multi-pole breakers, one auxiliary switch is supplied, mounted in the extreme right pole.
6 Separate pole type voltage coils not rated for continuous duty. Available only with delay codes 10 and 20.
7 Available with Circuit Codes B & D only. VDE Certified to 30 amps. UL Recognized and CSA Accepted to 50 amps.
8 VDE Certification available with single pole breakers with DC Delay only. UL Recognition and CSA Accepted available in one and two pole breakers.
9 Screw Terminals are recommended on ratings greater than 20 amps. Ratings over 30 amps are only available with Terminal Codes 5, 9, G, H, J, K, M and Q.
10 VDE Certification up to 25 amps and UL Recognition and CSA Acceptance up to 30 amps, but not recommended over 20 amps.
11 Terminal Codes 3, 5 E and H (Bus Type) with VDE, are supplied with Lock Washers, and
Terminal Code M (M6 Threaded Stud) with VDE is supplied with Lock and Flat Washers. These breakers are only VDE Certified when the washers are used.
12 VDE Cert. available up to 12 amps. UL Rec. & CSA Acceptance available up to 30 amps.
13 Single pole breakers with Terminal Code P (Printed Circuit Board) are available up to 30 amps with VDE Certification and 50 amps with UL Recognition and CSA Acceptance, with
Circuit Codes A, B and C. Two pole breakers with Terminal Code P (Printed Circuit Board) are available up to 40 amps with UL Recognition and CSA Acceptance with Circuit Codes A, B and C.
14 Available with Actuator Codes A, S and T.
15 Available with voltage coils only.
16 Terminal Code Q not available with VDE approvals.
0200.020
2250.250
4202.000
0250.025
2300.300
5222.250
0300.030
2350.350
5272.750
0350.035
2400.400
4303.000
0400.040
2450.450
4353.500
0450.045
2500.500
4404.000
0500.050
2550.550
4454.500
0550.055
2600.600
4505.000
0600.060
2650.650
4555.500
0650.065
2700.700
4606.000
0700.070
2750.750
4656.500
0750.075
2800.800
4707.000
0800.080
2850.850
4757.500
0850.085
2900.900
4808.000
0900.090
2950.950
4858.500
0950.095
4101.000
4909.000
2100.100
5121.250
4959.500
2150.150
4151.500
610 10.000
2200.200
517 1.750
71010.500
OR VOLTAGE COIL (NORMAL RATED VOLTAGE) 6
611 11.000
71111.500
61212.000
71212.500
61313.000
61414.000
61515.000
61616.000
61717.000
61818.000
62020.000
62222.000
62424.000
62525.000
63030.000
635 835.000
640 840.000
645 845.000
650 850.000
A06 6 DC
A12 12 DC
A18 18 DC
A24 24 DC
J65 65 AC
K20 120 AC
L40 240 AC
CODEAMPERES
A32 32 DC
A48 48 DC
A65 65 DC
J06
6 AC
J12
J18
J24
J48
12 AC
18 AC
24 AC
48 AC
8 TERMINAL 9
F Screw M5 with upturned lugs
1 10 Push-On 0.250 Tab (Q.C.)
& 30° bend
2
Screw 8-32 with upturned lugs G Screw M5 (Bus Type) & 30° bend
3 11 Screw 8-32 (Bus Type)
H Screw M5 (Bus Type)
4
Screw 10-32 with upturned lugs J Screw M5 Back Connect
K Screw 10-32 Back Connect
5 11 Screw 10-32 (Bus Type)
6
Screw 8-32 with upturned lugs L 12 0.250 Q.C./ Solder Lug
& 30° bend
M 11 M6 Threaded Stud
7
Screw 8-32 (Bus Type) N Screw M4 Back Connect
& 30° bend
P 13 Printed Circuit Board Terminals
8
Screw 10-32 with upturned lugs Q 16 Push-In Stud
& 30° bend
R Screw M4 with upturned lugs
9
Screw 10-32 (Bus Type) & 30° bend
& 30° bend
S 15 Push-On 0.110 Tab (Q.C.)
B
Screw M5 with upturned lugs
& 30° bend
C Screw M4 with upturned lugs T Screw M4 (Bus Type) & 30° bend
E 11 Screw M4 (Bus Type)
Y Screw 8-32 Back Connect
9 ACTUATOR COLOR & LEGEND
Actuator Color
I-O
ON-OFF
White
AB
Black
CD
Red
FG
Green
HJ
Blue
KL
Yellow
MN
Gray
PQ
Orange
RS
Dual
Legend Color
1Black
2White
3White
4White
5White
6Black
7Black
8Black
10 MOUNTING / BARRIERS
MOUNTING STYLE
BARRIERS
Threaded Insert, 2 per pole
1
6-32 x 0.195 inches
no
A
6-32 x 0.195 inches (multi-pole units only)yes
2
ISO M3 x 5mm
no
B
ISO M3 x 5mm
yes
Rectangular Adapter Plate with mounting centers of 2.062 inches [52.37mm] and Threaded insert, 2 per pole
3 14 6-32 x 0.225 inches
no
C 14 6-32 X 0.225 inches (multi-pole units only)yes
14
4 ISO M3 x 6.5mm no
D 14 ISO M3 x 6.5mm yes
Front panel Snap-In, 0.75” [19.05mm] wide bezel
5
without Handleguard
no
6
without Handleguard (multipole only)
yes
Front panel Snap-In, 0.96” wide bezel
7
without Handleguard, 1-pole 0.96” wide;
no
multipole units have .105” bezel overhang on all sides
8
without Handleguard, 1-pole 0.96” wide; yes
(multipole only) .105” bezel overhang on all sides
11 AGENCY APPROVAL
C
UL Recognized & CSA Accepted
D
VDE Certified, UL Recognized & CSA Accepted
E
TUV Certified, UL Recognized & CSA Accepted
I
UL Recognized STD 1077, UL Recognized 1500 (ignition protected),
& CSA Accepted
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
B-Series Circuit Breaker - Handle UL489A – Ordering Scheme | 7
B A 1
1
Series
2
Actuator
B 0
4
Circuit
3
Poles
5
Aux/Alarm
Switch
14
6
Frequency
& Delay
2 ACTUATOR 1
A
Handle, one per pole
B
Handle, one per multipole unit
S
Mid-Trip Handle, one per pole
T
Mid-Trip Handle, one per pole & Alarm Switch
3
4
Three
Four
4 CIRCUIT
B
Series Trip (Current)
5 AUXILIARY / ALARM SWITCH 2
0
without Aux Switch
7
1
S.P.D.T., 0.093 Q.C. Term.
2
S.P.D.T., 0.110 Q.C. Term.
8
3
S.P.D.T., 0.110 Solder Lug
9
6 FREQUENCY & DELAY 4
11 DC Ultra Short
12 DC Short
14 DC Medium
16 DC Long
S.P.S.T., 0.110 Q.C. Term.
(Gold Contacts)
S.P.S.T., 0.187 Q.C. Term.
S.P.D.T., 0.187 Q.C. Term.
52 DC, Short,Hi-Inrush
54 DC, Medium, Hi-Inrush
56 DC, Long, Hi-Inrush
7 CURRENT RATING (AMPERES)
CODEAMPERES
2100.100
2150.150
2200.200
2250.250
2300.300
2350.350
2400.400
2450.450
2500.500
2550.550
2600.600
2650.650
2700.700
2750.750
2800.800
2850.850
2900.900
2950.950
4101.000
5121.250
4151.500
517 1.750
4202.000
5222.250
5272.750
4303.000
4353.500
4404.000
4454.500
4505.000
4555.500
4606.000
4656.500
4707.000
4757.500
4808.000
4858.500
4909.000
4959.500
610 10.000
71010.500
611 11.000
71111.500
61212.000
71212.500
8 TERMINAL 4
1 5 Push-On 0.250 Tab (Q.C.)
B
2
Screw 8-32 with upturned lugs
6
3
Screw 8-32 (Bus Type)
F
4
Screw 10-32 with upturned lugs
G
5 6 Screw 10-32 (Bus Type)
6
Screw 8-32 with upturned lugs H & 30° bend
J
7
Screw 8-32 (Bus Type) K
& 30° bend
M 6
8
Screw 10-32 with upturned lugs N
& 30° bend
P 7
9
Screw 10-32 (Bus Type) Q 8
& 30° bend
Y
7
Current Rating
1 B 1
8
Terminal
9
Actuator
Color
10
Mounting/
Barriers
M T
11
Max. Appl.
Rating
12
Agency
Approval
9 ACTUATOR COLOR & LEGEND
Actuator Color
ON-OFF
Dual
Legend Color
White
B1Black
Black
D2White
Red
G3White
Green
J4White
Blue
L5White
Yellow
N6Black
Gray
Q7Black
Orange
S8Black
1 SERIES
B
3 POLES 2
1
One
2
Two
450
61313.000
61414.000
61515.000
61616.000
61717.000
61818.000
62020.000
62222.000
62424.000
62525.000
63030.000
635 335.000
640 340.000
645 345.000
650 350.000
Screw M5 with upturned lugs
& 30° bend
Screw M5 with upturned lugs
& 30° bend
Screw M5 (Bus Type) & 30° bend
Screw M5 (Bus Type)
Screw M5 Back Connect
Screw 10-32 Back Connect
M6 Threaded Stud
Screw M4 Back Connect
Printed Circuit Board Terminals
Push-In Stud
Screw 8-32 Back Connect
10 MOUNTING / BARRIERS
MOUNTING STYLE
BARRIERS
Threaded Insert, 2 per pole
1
6-32 x 0.195 inches
no
A
6-32 x 0.195 inches (multi-pole units only)yes
2
ISO M3 x 5mm
no
B
ISO M3 x 5mm
yes
Rectangular Adapter Plate with mounting centers of 2.062 inches [52.37mm] and Threaded insert, 2 per pole
3
6-32 x 0.225 inches
no
C
6-32 X 0.225 inches (multi-pole units only)yes
4
ISO M3 x 6.5mm no
D
ISO M3 x 6.5mm yes
Front panel Snap-In, 0.75” [19.05mm] wide bezel
5
without Handleguard
no
6
without Handleguard (multipole only)
yes
Front panel Snap-In, 0.96” wide bezel
7
without Handleguard, 1-pole 0.96” wide;
no
multipole units have .105” bezel overhang on all sides
8
without Handleguard, 1-pole 0.96” wide; yes
(multipole only) .105” bezel overhang on all sides
11 MAXIMUM APPLICATION RATING
M
80 DC
12 AGENCY APPROVAL
T
UL489A Listed
K
UL489A Listed, VDE Certified
J
UL489A Listed, TUV Certified
Notes:
1 Actuator Code:
A: Handle tie pin spacer(s) and retainers provided unassembled with multi-pole units.
S: Handle moves to mid-position only upon electrical trip of the breaker.
T: Handle moves to mid-position and alarm switch activates only upon electrical trip of the breaker.
2 On multi-pole breakers, one auxiliary switch is supplied, mounted in the extreme right pole.
3 VDE Certification available with single pole breakers only. UL489A Listing available with
one and two pole breakers.
4 Screw Terminals are recommended on ratings greater than 20 amps. Ratings over 30 amps are only available with Terminal Codes 5, 9, G, H, J, K, M and Q.
5 Terminal Code 1 (Push-On) available up to 25 amps with TUV or VDE Certification and
30 amps with UL489A Listing, but is not recommended over 20 amps.
6 Terminal Codes 3, 5 and H (Bus Type) with TUV or VDE, are supplied with Lock Washers,
and Terminal Code M (M6 Threaded Stud) with TUV or VDE is supplied with Lock and
Flat Washers. These breakers are only TUV or VDE Certified when the washers are used.
7 Single pole breakers with Terminal Code P (Printed Circuit Board) are available up to 30 amps with VDE Certification and 50 amps with UL489A Listing.
8 Terminal Code Q not available with VDE approvals.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
8 | B-Series Circuit Breaker - Handle UL489 Listed – Ordering Scheme
B A 1
1
Series
2
Actuator
B 0
4
Circuit
3
Poles
5
Aux/Alarm
Switch
24
450
6
Frequency
& Delay
7
Current Rating
2 ACTUATOR 1
A
Handle, one per pole
B
Handle, one per multipole unit
S
Mid-Trip Handle, one per pole
T
Mid-Trip Handle, one per pole & Alarm Switch
2
3 3 Three
Two
4 CIRCUIT
B
Series Trip (Current)
5 AUXILIARY / ALARM SWITCH 4
0
without Aux Switch
1
S.P.D.T., 0.093 Q.C. Term.
2
S.P.D.T., 0.110 Q.C. Term.
3 S.P.D.T., 0.110 Solder Lug
8 S.P.S.T., 0.187 Q.C. Term.
9 S.P.D.T., 0.187 Q.C. Term.
6 FREQUENCY & DELAY
21 AC Ultra Short
22 AC Short
24 AC Medium
26 AC Long
8
Terminal
9
Actuator
Color
10
Mounting/
Barriers
K G
11
Max. Appl.
Rating
12
Agency
Approval
9 ACTUATOR COLOR & LEGEND 6
Actuator Color
ON-OFF Dual
Legend Color
White
B1 Black
Black
D2 White
Red
G3White
Green
J4White
Blue
L5White
Yellow
N6Black
Gray
Q7Black
Orange
S8Black
1 SERIES
B
3 POLES 2
1
One
1 B A
42 AC, Short,Hi-Inrush
44 AC, Medium, Hi-Inrush
46 AC, Long, Hi-Inrush
10 MOUNTING / BARRIERS
MOUNTING STYLE
BARRIERS
Threaded Insert, 2 per pole
A
6-32 x 0.195 inches (multi-pole units only)yes
B
ISO M3 x 5mm
yes
Rectangular Adapter Plate with mounting centers of 2.062 inches [52.37mm] and Threaded insert, 2 per pole 7
C
6-32 X 0.225 inches (multi-pole units only)yes
D
ISO M3 x 6.5mm yes
Front panel Snap-In, 0.75” [19.05mm] wide bezel
6
without Handleguard (multipole only)
yes
Front panel Snap-In, 0.96” wide bezel
8
without Handleguard, 1-pole 0.96” wide; yes
(multipole only) .105” bezel overhang on all sides
11 MAXIMUM APPLICATION RATING
C 8120/240VAC
K120VAC
7 CURRENT RATING (AMPERES)
CODEAMPERES
2100.100
2150.150
2200.200
2250.250
2300.300
2350.350
2400.400
2450.450
2500.500
2550.550
2600.600
2650.650
2700.700
2750.750
2800.800
2850.850
2900.900
2950.950
4101.000
5121.250
4151.500
517 1.750
4202.000
5222.250
5272.750
4303.000
4353.500
4404.000
4454.500
4505.000
4555.500
4606.000
4656.500
4707.000
4757.500
4808.000
4858.500
4909.000
4959.500
610 10.000
71010.500
611 11.000
A
8 TERMINAL 4
1 Push-On 0.250 Tab (Q.C.)
2
Screw 8-32 with upturned lugs B
3
Screw 8-32 (Bus Type)
4
Screw 10-32 with upturned lugs F
5
Screw 10-32 (Bus Type)
6
Screw 8-32 with upturned lugs G
& 30° bend
H
7
Screw 8-32 (Bus Type) J
& 30° bend
K
8
Screw 10-32 with upturned lugs M
& 30° bend
N
9
Screw 10-32 (Bus Type) Q
& 30° bend
Y
71111.500
61212.000
71212.500
61313.000
61414.000
61515.000
61616.000
61717.000
61818.000
62020.000
62222.000
62424.000
62525.000
63030.000
Load Terminal #8 Screw with QC
Combination (Special Catalog #)
Screw M5 with upturned lugs
& 30° bend
Screw M5 with upturned lugs
& 30° bend
Screw M5 (Bus Type) & 30° bend
Screw M5 (Bus Type)
Screw M5 Back Connect
Screw 10-32 Back Connect
M6 Threaded Stud
Screw M4 Back Connect
Push-In Stud
Screw 8-32 Back Connect
12 AGENCY APPROVAL
G
UL489 Listed
3
UL489 Listed, TUV Certified
Notes:
1 Actuator Code:
A: Handle tie pin spacer(s) and retainers provided un-assembled with multi-pole units.
B: Handle location as viewed from front of breaker:
2 pole - left pole
3 pole - center pole
S: Handle moves to mid-position only upon electrical trip of the breaker. Available with circuit codes B, C, D, E, F, G, H and K.
T: Handle moves to mid-position and alarm switch activates only upon electrical trip of the breaker. Available with circuit codes B & C.
2 All poles must be same polarity.
3 3 pole units available only when 1 of 3 poles is neutral.
4 Auxiliary/Alarm Switch circuit must be same polarity as the main circuit. On multi-pole
breakers, one auxiliary switch is supplied, mounted in the extreme right pole.
5 Screw Terminals are recommended on ratings greater than 20 amps.
6 Standard actuator colors are black and white.
7 Adapter plate with mounting centers of 2.082 inches. Available with Actuator
Codes A, S and T.
8 Voltage Rating available with 2 and 3-pole breakers only.
9 Barriers supplied on multi-pole units only.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
B-Series Circuit Breaker - Handle – Circuit & Terminal Diagrams | 9
Circuit & Terminal Diagrams: in. [mm]
SERIES TRIP
(2 TERM'S.)
ANSI
IEC
SERIES TRIP
LINE
(NETZ)
LINE
LINE
MAIN TERM'S.
(SEE TABLE A)
A
CIRCUIT
CODE
AUX
SWITCH
CODE
CIRCUIT SCHEMATIC
CIRCUIT
CODE
AUX
SWITCH
CODE
CIRCUIT SCHEMATIC
ANSI
IEC
SWITCH ONLY (NO COIL)
LINE (3)
(NETZ)
O
B
C
O
B
C
2
3
4
H
0
K
0
I>
LOAD
(LAST)
LOAD
1.730 [43.94]
LOAD
LOAD (LAST)
SERIES TRIP WITH
AUXILIARY / ALARM SWITCH
SWITCH ONLY (NO COIL)
WITH AUXILIARY SWITCH
.520 [13.21]
LINE
SERIES TRIP
W AUX SWITCH
(5 TERM'S.)
LINE (NETZ)
LINE
C
C
NO
NO
NO
NC
NC
AUX. SWITCH
TERM'S.
A
2
3
4
LINE
LINE (NETZ)
(3)
SHUNT
(NEBENSCHLUSS)
D
E
1
LINE (NETZ)
LINE (3)
(NETZ)
LINE
(NETZ)
1
F
G
4
RELAY
(RELAIS)
RELAY
STANDARD C/B
VOLTAGE
COIL
3
2
4
LOAD
(LAST)
2
I>
U>
4
LOAD
(LAST)
LOAD
MID TRIP C/B
MID TRIP C/B
AUX. SWITCH MODE
HANDLE POSITION
ALARM SWITCH MODE
HANDLE POSITION
30°
30°
AUX. SWITCH MODE
(w/o ALARM SWITCH)
30°
OFF
F
O
OF
NC
NO
C
F
O
OF
NC
NO
C
F
O
OF
ON
ON
ON
I
I
I
NC
NO
C
NC
NO
C
NC
NO
C
ON
30°
NC
NO
30°
C
30°
NC
NO
F
O
OF
30°
C
90°
90°
MID
TRIP
ELECTRICAL
TRIP
NC
NO
C
VOLTAGE
COIL
0
I>
3
4
HANDLE POSITION
VOLTAGE
COIL
1
HANDLE POSITION VS. AUX/ALARM SWITCH MODE
CIRCUIT
BREAKER
MODE
U>
2
LOAD
.390 [9.91]
LOAD
(LAST)
LINE
1
RELAY
3
I>
DUAL COIL; SERIES TRIP CURRENT COIL,
RELAY TRIP VOLTAGE COIL
RELAY
(RELAIS)
2
4
LOAD (LAST)
LOAD
3
2
NC
ALARM SWITCH
VOLTAGE
COIL
LOAD (LAST)
1
.780 [19.81]
I>
0
RELAY TRIP
RELAY TRIP
(4 TERM'S.)
NO
LINE
I>
LINE
NO
LOAD
SHUNT
LOAD
C
DUAL COIL; SERIES TRIP CURRENT COIL,
SHUNT TRIP VOLTAGE COIL
SHUNT TRIP
(3 TERM'S.)
.390 [9.91]
C
ALARM SWITCH
SHUNT TRIP
(3)
STD. AUX. SWITCH
NC
NC
LOAD (LAST)
LOAD
LINE (NETZ)
STD. AUX. SWITCH
C
MID
TRIP
NC
NO
C
Notes:
1 All dimensions are in inches [millimeters].
2 Tolerance ±.020 [.51] unless otherwise specified.
3 Alarm Switch available with .110 x .020 Q.C. & Solder Lug Terminals Only.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
3
VOLTAGE
COIL
10 | B-Series Circuit Breaker - Handle – Circuit & Terminal Diagrams
Circuit & Terminal Diagrams: in. [mm]
TERMINAL DIMENSIONAL DETAIL & RATING
1.000 [25.40]
.392 [9.97]
.205 [5.21]
.360[9.14]
.392[9.96]
.250[6.35]
.392[9.96]
.375[9.53]
.375[9.53]
.069[1.75] DIA
TAB (Q.C.)
30 AMP
.344[8.74]
.250[6.35]
QC SOLDER LUG
BUS
#8-32 30 AMP
#10-32 30 AMP
M5 30 AMP
M4 30 AMP
#8-32 30 AMP
#10-32 50 AMP
.405[10.29]
.437 [11.10]
.093DIA [.76]
UPTURN LUG
M6 STUD
#8-32 30 AMP
#10-32 50 AMP
M5 50 AMP
M4 30 AMP
[+.05]
[-.00]
.110 [2.80]
.161 DIA [Ø 4.10]
.110 [2.80]
.051 DIA[Ø1.29]
.087 [2.20]
PUSH-IN STUD
.126 [3.20]
.287 [7.29]
MATING HOLE
TAB (Q.C.)
.070 DIA [Ø1.80]
SOLDER TYPE
1.313 [33.35]
2.230 [56.64] TYP
.154 [3.91] DIA
PUSH-IN STUD
50 AMP
AUXILIARY SWITCH TERMINAL DETAIL
+.002
-.000
.100 [2.54]
.750 [19.05]
BACK CONNECT
30 AMP
CENTERLINE OF PUSH-IN
STUD CONTACT AREA
.750[19.05]
50 AMP
TABLE A
TIGHTENING TORQUE
SPECIFICATIONS
THREAD SIZE
#6-32 & M3 MOUNTING
HARDWARE
#8-32 & M4 THREAD
TERMINAL SCREW
#10-32 & M5 THREAD
TERMINAL SCREW
TORQUE
7-9 IN-LBS
[0.8-1.0 NM]
12-15 IN-LBS
[1.4-1.7 NM]
15-20 IN-LBS
[1.7-2.3 NM]
.520 [13.21]
TABLE B
LINE
LINE
TAB (Q.C.)
MAIN
2.000 [50.80]
LOAD
LOAD
SCREW TYPE
2.122 [53.90]
SHUNT, RELAY TAB (Q.C.)
&
SCREW #8-32
DUAL COIL
W/UPTURNED LUGS
TAB (Q.C.) .110 x .020
AUX. SWITCH*
SOLDER TYPE
2.612 [66.35]
2.644 [67.16]
2.537 [64.44]
2.348 [59.64]
* AVAILABLE ON SERIES TRIP AND SWITCH ONLY CIRCUITS.
.875 [22.23] REF
BARRIER FOR
UL-489 MULTI-POLE
BREAKERS
BARRIER FOR
UL-RECOGNIZED MULTI-POLE
BREAKERS
SEE TABLE-B
DEPTH BEHIND PANEL
WHEN CALLED FOR ON MULTI-POLE UNITS, ONLY ONE AUX.
SWITCH IS NORMALLY SUPPLIED, AS SHOWN IN MULTI-POLE
IDENTIFICATION SCHEME.
.393 [9.96] REF
LINE
(NETZ)
ON
I
MID
TRIP
DEPTH
BEHIND PANEL
2.090 [53.09]
TERMINAL DESCRIPTION
1.560 [39.62] TYP
1.936[49.17]
30°
1.350 [34.29]
2 PLCS
OFF
O
1.560 [39.62]
TYP
LOAD
(LAST)
.032 [.81]
TYP
.220 [5.59] TYP
PUSH-IN
STUD
M6 STUD
SCREW TERMINAL
WITH 30° BEND
1.250 [31.75]
BACK CONNECT
SCREW TERMINAL
BACK CONNECT
SCREW TERMINAL
WITH RETAINER
Notes:
1 All dimensions are in inches [millimeters].
2 Tolerance ±.020 [.51] unless otherwise specified.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
B-Series Circuit Breaker - Handle - Dimensional Specifications | 11
Dimensional Specifications: in. [mm]
Notes:
1 All dimensions are in inches [millimeters].
2 Tolerance ± 0.20 [.51] unless otherwise specified.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
12 | B-Series Circuit Breaker - Handle – Front Panel Snap-in Mounting Style 5 - Dimensional Specifications
Dimensional Specifications: in. [mm]
Notes:
1 All dimensions are in inches [millimeters].
2 Recommended panel thickness: .040 [1.02] to .100 [2.54].
3 Tolerance ±.020 [.51] unless otherwise specified.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
B-Series Circuit Breaker - Handle – Front Panel Snap-In Mounting Style 7 - Dimensional Specifications | 13
Dimensional Specifications: in. [mm]
Notes:
1 All dimensions are in inches [millimeters].
2 Recommended panel thickness: .040 [1.02] to .100 [2.54].
3 Tolerance ±.020 [.51] unless otherwise specified.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
14 | B-Series Circuit Breaker - Rocker UL489 Listed – Ordering Scheme
B F 1
1
Series
2
Actuator
B 0
4
Circuit
3
Poles
5
Aux/Alarm
Switch
24
630
6
Frequency
& Delay
7
Current Rating
1 SERIES
B
2 ACTUATOR
Two Color Visi-Rocker
C
Indicate ON, vertical legend
D
Indicate ON, horizontal legend
F
Indicate OFF, vertical legend
G
Indicate OFF, horizontal legend
Single color
J
Vertical legend
K
Horizontal legend
2 3 A
8
Terminal
9
Actuator
Color
10
Mounting/
Barriers
8 TERMINAL 5
1 6 Push-On 0.250 Tab (Q.C.)
B
2
Screw 8-32 with upturned lugs C
3
Screw 8-32 (Bus Type)
F
4
Screw 10-32 with upturned lugs
5 Screw 10-32 (Bus Type)
G
6
Screw 8-32 with upturned lugs H & 30° bend
J
7
Screw 8-32 (Bus Type) K
& 30° bend
N
8
Screw 10-32 with upturned lugs Y
& 30° bend
9
Screw 10-32 (Bus Type) & 30° bend
K G
11
Max. Appl.
Rating
12
Agency
Approval
Screw M5 with upturned lugs
Screw M4 with upturned lugs
Screw M5 with upturned lugs
& 30° bend
Screw M5 (Bus Type) & 30° bend
Screw M5 (Bus Type)
Screw M5 Back Connect
Screw 10-32 Back Connect
Screw M4 Back Connect
Screw 8-32 Back Connect
9 ACTUATOR COLOR & LEGEND
Actuator or
Marking:
Marking Color
Visi-Color 7 ON-OFFDual 7
Single Color Visi-Rocker
White
B1Black White
Black
D2Whiten/a
Red
G3WhiteRed
Green
J4WhiteGreen
Blue
L5WhiteBlue
Yellow
N6Black Yellow
Gray
Q7Black Gray
Orange
S8Black Orange
3 POLES 1,2
1
One
2
3 3 Three
Two
4 CIRCUIT
B
Series Trip (Current)
5 AUXILIARY / ALARM SWITCH 4
0
without Aux Switch
7
1
S.P.D.T., 0.093 Q.C. Term.
2
S.P.D.T., 0.110 Q.C. Term.
8
3
S.P.D.T., 0.110 Solder Lug
9
6 FREQUENCY & DELAY
21 AC Ultra Short
22 AC Short
24 AC Medium
26 AC Long
S.P.S.T., 0.110 Q.C. Term.
(Gold Contacts)
S.P.S.T., 0.187 Q.C. Term.
S.P.D.T., 0.187 Q.C. Term.
42 AC, Short,Hi-Inrush
44 AC, Medium, Hi-Inrush
46 AC, Long, Hi-Inrush
7 CURRENT RATING (AMPERES)
CODEAMPERES
0200.020
0250.025
0300.030
0350.035
0400.040
0450.045
0500.050
0550.055
0600.060
0650.065
0700.070
0750.075
0800.080
0850.085
0900.090
0950.095
2100.100
2150.150
2200.200
2250.250
2300.300
2350.350
2400.400
2450.450
2500.500
2550.550
2600.600
2650.650
2700.700
2750.750
2800.800
2850.850
2900.900
2950.950
4101.000
5121.250
4151.500
517 1.750
4202.000
5222.250
5272.750
4303.000
4353.500
4404.000
4454.500
4505.000
4555.500
4606.000
4656.500
4707.000
4757.500
4808.000
4858.500
4909.000
4959.500
610 10.000
71010.500
611 11.000
71111.500
61212.000
71212.500
61313.000
61414.000
61515.000
61616.000
61717.000
61818.000
62020.000
62222.000
62424.000
62525.000
63030.000
10 MOUNTING / BARRIERS
MOUNTING STYLEBARRIERS 9
Threaded Insert, 2 per pole
A
6-32 x 0.195 inches (multi-pole units only)yes
B
ISO M3 x 5mm
yes
ROCKERGUARD BEZEL
Threaded Insert, 2 per pole
C
6-32 X 0.225 inches (multi-pole units only)yes
D
ISO M3 x 6.5mm yes
11 MAXIMUM APPLICATION RATING
C 8 120/240 VAC
K 120 VAC
12 AGENCY APPROVAL
G
UL489 Listed
3
UL489 Listed, TUV Certified
Notes:
1 Multi-pole breakers have all breakers identical except when specifying Auxiliary switch
and/or mixed poles, and have one rocker per breaker.
2 All poles must be same polarity.
3 3 pole units available only when 1 of 3 poles is neutral.
4 On multi-pole breakers, one auxiliary switch is supplied, mounted in the extreme right pole.
5 Screw Terminals are recommended on ratings greater than 20 amps.
6 Terminal Code 1 (Push-On) available up to 30 amps, but are not recommended over
20 amps.
7 Dual legend = ON-OFF/I-O
8 Voltage Rating available with 2 and 3-pole breakers only.
9 Barriers supplied on multi-pole units only.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
B-Series Circuit Breaker - Flat Rocker UL489 Listed – Ordering Scheme | 15
B 1 1
1
Series
2
Actuator
B 0
4
Circuit
3
Poles
5
Aux/Alarm
Switch
24
630
6
Frequency
& Delay
7
Current Rating
1 SERIES
B
2 ACTUATOR 1
Two Color Visi-Rocker
1 Indicate OFF, vertical legend
2 Indicate OFF, horizontal legend
Single color
3 Vertical legend
4 Horizontal legend
Push-To-Reset, Visi-Rocker
5 Indicate OFF, vertical legend
6 Indicate OFF, horizontal legend
Push-To-Reset , Single color
7 Vertical legend
8 Horizontal legend
2 3 A
8
Terminal
9
Actuator
Color
10
Mounting/
Barriers
8 TERMINAL 6
1 7 Push-On 0.250 Tab (Q.C.)
B
2
Screw 8-32 with upturned lugs C
3
Screw 8-32 (Bus Type)
F
4
Screw 10-32 with upturned lugs
5 Screw 10-32 (Bus Type)
G
6
Screw 8-32 with upturned lugs H & 30° bend
J
7
Screw 8-32 (Bus Type) K
& 30° bend
N
8
Screw 10-32 with upturned lugs Y
& 30° bend
9
Screw 10-32 (Bus Type) & 30° bend
K G
11
Max. Appl.
Rating
12
Agency
Approval
Screw M5 with upturned lugs
Screw M4 with upturned lugs
Screw M5 with upturned lugs
& 30° bend
Screw M5 (Bus Type) & 30° bend
Screw M5 (Bus Type)
Screw M5 Back Connect
Screw 10-32 Back Connect
Screw M4 Back Connect
Screw 8-32 Back Connect
9 ACTUATOR COLOR & LEGEND
Actuator or
Marking:
Marking Color
Visi-Color 8 ON-OFFDual 8
Single Color Visi-Rocker
White
B1Black White
Black
D2Whiten/a
Red
G3WhiteRed
Green
J4WhiteGreen
Blue
L5WhiteBlue
Yellow
N6Black Yellow
Gray
Q7Black Gray
Orange
S8Black Orange
3 POLES 2,3
1
One
2
3 4 Three
Two
4 CIRCUIT
B
Series Trip (Current)
5 AUXILIARY / ALARM SWITCH 4
0
without Aux Switch
7
1
S.P.D.T., 0.093 Q.C. Term.
2
S.P.D.T., 0.110 Q.C. Term.
8
3
S.P.D.T., 0.110 Solder Lug
9
6 FREQUENCY & DELAY
21 AC Ultra Short
22 AC Short
24 AC Medium
26 AC Long
S.P.S.T., 0.110 Q.C. Term.
(Gold Contacts)
S.P.S.T., 0.187 Q.C. Term.
S.P.D.T., 0.187 Q.C. Term.
42 AC, Short,Hi-Inrush
44 AC, Medium, Hi-Inrush
46 AC, Long, Hi-Inrush
7 CURRENT RATING (AMPERES)
CODEAMPERES
0200.020
0250.025
0300.030
0350.035
0400.040
0450.045
0500.050
0550.055
0600.060
0650.065
0700.070
0750.075
0800.080
0850.085
0900.090
0950.095
2100.100
2150.150
2200.200
2250.250
2300.300
2350.350
2400.400
2450.450
2500.500
2550.550
2600.600
2650.650
2700.700
2750.750
2800.800
2850.850
2900.900
2950.950
4101.000
5121.250
4151.500
517 1.750
4202.000
5222.250
5272.750
4303.000
4353.500
4404.000
4454.500
4505.000
4555.500
4606.000
4656.500
4707.000
4757.500
4808.000
4858.500
4909.000
4959.500
610 10.000
71010.500
611 11.000
71111.500
61212.000
71212.500
61313.000
61414.000
61515.000
61616.000
61717.000
61818.000
62020.000
62222.000
62424.000
62525.000
63030.000
10 MOUNTING / BARRIERS 9
STANDARD ROCKER BEZEL
BARRIERS 12
Threaded Insert, 2 per pole
FLAT ROCKER ACTUATOR
A
6-32 x 0.195 inches (multi-pole units only)yes
B
ISO M3 x 5mm
yes
RECESSED OFF SIDE ROCKER ACTUATOR 10
E
6-32 X 0.225 inches (multi-pole units only)yes
F
ISO M3 x 6.5mm yes
PUSH-TO-RESET BEZEL,Threaded Insert, 2 per pole
C
6-32 x 0.195 inches
yes
D
ISO M3 x 5mm yes
11 MAXIMUM APPLICATION RATING
C 11 120/240 VAC
K 120 VAC
12 AGENCY APPROVAL
G
UL489 Listed
3
UL489 Listed, TUV Certified
Notes:
1 Push-To-Reset actuators have OFF portion of rocker shrouded.
2 Multi-pole breakers have all breakers identical except when specifying Auxiliary switch and/or
mixed poles, and have one rocker per breaker.
3 All poles must be same polarity.
4 3 pole units available only when1 of 3 poles is neutral.
5 On multi-pole breakers, one auxiliary switch is supplied, mounted in the extreme right pole.
6 Screw Terminals are recommended on ratings greater than 20 amps.
7 Terminal Code 1 (Push-On) available up to 30 amps, but are not recommended over
20 amps.
8 Color shown is visi and legend with remainder of rocker black, Dual = ON-OFF/I-O legend.
9 Legend on Push-to-reset bezel/shroud is white with single color actuator codes 7 & 8.
Legend on Push-To-Reset bezel/shroud matches Visi-Color of rocker with actuator codes
5 & 6.
10 Recessed “off-side” available with actuator codes 1, 2, 3 & 4. Legends on rocker are available in ink stamping only.
11 Voltage rating available with 2 & 3-pole breakers only.
12 Barriers supplied on multi-pole units only.
Email: [email protected]gtech.com Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
16 | B-Series Circuit Breaker - Rocker UL489 Listed - Dimensional Specifications
Dimensional Specifications: in. [mm]
Notes:
1 Dimensions apply to all variations shown. Notice that circuit breaker line & load
terminal orientation on indicate “OFF” is opposite of indicate “ON”.
2 For pole orientation with horizontal legend, rotate front view clockwise 90°.
3 All dimensions are in inches [millimeters].
4 Tolerance ±.020 [.51] unless otherwise specified.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
B-Series Circuit Breaker - Flat Rocker UL489 Listed - Dimensional Specifications | 17
Dimensional Specifications: in. [mm]
Notes:
1 All dimensions are in inches [millimeters].
2 For pole orientation with horizontal legend, rotate front view clockwise 90°.
3 Tolerance ±.010 [.25] unless otherwise specified.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
18 | B-Series Circuit Breaker - PC Terminal Diagrams
PC Terminal Diagrams: in. [mm]
Notes:
1 All dimensions are in inches [millimeters].
2 For pole orientation with horizontal legend, rotate front view clockwise 90°.
3 Tolerance ±.010 [.25] unless otherwise specified.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
Reps & Contact | 19
Authorized Sales Representatives
Click on the group name on the map below to find your local representative or visit
www.carlingtech.com/findarep.
«
«
Matera
W. Canada
Matera
E. Canada
MIDWEST
DM
Michigan
TEMCO Northwest
Alaska, Hawaii
«
NORTHERN
Hanna Lind Ltd.
Melody
Emery
Sierra
Bridge Marketing
Omega Limited
Dy-tronix Inc.
LD. Allen
Norris
DM Assoc
East
Pacent
DM
Assoc
TSI North
TSI
WEST
Signal
Enterprises
Luscombe
Engineering
Pinnacle Marketing
Matrix
DM Mexico
South America
Mexico
«
«
Sunbelt Components
SOUTHEAST
ProRep
Solutions
LATIN AMERICA
Americas
Europe
Middle East
Africa
Asia-Pacific
Oceania
About Carling
Founded in 1920, Carling Technologies is a leading manufacturer of electrical and electronic switches
and assemblies, circuit breakers, electronic controls, power distribution units, and multiplexed power
distribution systems. With four ISO registered manufacturing facilities and technical sales offices worldwide,
Carling Technologies Sales, Service and Engineering teams do much more than manufacture electrical
components, they engineer powerful solutions! To learn more about Carling please visit
www.carlingtech.com/company-profile.
To view all of Carling’s environmental, quality, health & safety certifications please visit
www.carlingtech.com/environmental-certifications
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
Worldwide Headquarters
Carling Technologies, Inc.
60 Johnson Avenue, Plainville, CT 06062
Phone: 860.793.9281 Fax: 860.793.9231
Email: [email protected]
Northern Region Sales Office: [email protected]
Southeast Region Sales Office: [email protected]
Midwest Region Sales Office: [email protected]
West Region Sales Office: [email protected]
Latin America Sales Office: [email protected]
Asia-Pacific Headquarters
Carling Technologies, Asia-Pacific Ltd.,
Kowloon, Hong Kong
Phone: Int + 852-2737-2277 Fax: Int + 852-2736-9332
Email: [email protected]
Shenzhen, China: [email protected]
Shanghai, China: [email protected]
Pune, India: [email protected]
Kaohsiung, Taiwan: [email protected]
Yokohama, Japan: [email protected]
Europe | Middle East | Africa Headquarters
Carling Technologies LTD
4 Airport Business Park, Exeter Airport,
Clyst Honiton, Exeter, Devon, EX5 2UL, UK
Phone: Int + 44 1392.364422 Fax: Int + 44 1392.364477
Email: [email protected]
Germany: [email protected]
France: [email protected]
www.carlingtech.com
REV_03_2016