TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Product Specifications Approval Sheet Product Description: 161.8625 MHz 0.3MHz BW SMD 7.0 x 5.0 mm SAW IF Filter TST Parts No.: TB1200A Customer Parts No.: Customer signature required Company: Division: Approved by : Date: Checked by: Kazuma Lee Approval by: Bob Chau Date: 10 / 06 / 2015 1. Customer signed back is required before TST can proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the changes. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-02\ TAI-SAW TECHNOLOGY CO., LTD. No.3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 161.8625MHz 0.3MHz BW (SMD 7×5 mm) MODEL NO.: TB1200A Rev No.1 A. MAXIMUM RATING: 1. Operating temperature range: -40°C to 85°C 2. Storage temperature range: -40°C to 85°C 3. Input Power Level : 10 dBm 4. Maximum DC Voltage : 10V RoHS Compliant Lead free Lead-free soldering Electrostatic Sensitive Device B. ELECTRICAL CHARACTERISTICS: Item Unit MHz Min. - Type. 161.8625 Max. - dB - 4.1 8 -1dB bandwidth MHz 0.3 1.6 - -3dB bandwidth MHz - 2.3 - -40dB bandwidth MHz - 6.7 7 Passband Ripple (Fc+/- 150kHz) dB - 0.4 1.0 Group delay variation (Fc+/- 150kHz) ns - 110 500 Absolute Group delay ns - 600 - 150 MHz ~153 MHz dB 30 40 322 MHz ~328.65MHz dB 35 60 406.1 MHz ~410MHz dB 35 60 Fc+100MHz~Fc+900MHz dB 35 60 ppm/°C - -23 - Source Impedance Ohm - 50 - Load Impedance Ohm - 50 - Center frequency, Fc Insertion Loss, IL Attenuation (Reference IL) Temperature Coefficient TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. FREQUENCY CHARACTERISTICS: (1) Narrow Band Response: (2) Pass Band Response and Group Time Delay Response: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 (3) Smith Chart: (4) Wide Band Response: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 D. MATCHING CIRCUIT: L1=47nH L2=47nH+3nH C1=39pF C2=30pF E. OUTLINE DRAWING: 1200 T △ □ Pin B–RF input Pin H –RF output Others - Ground □ : Week Code Unit : mm △ : Product / Year Code Product Code Table Year 2013 2017 2014 2018 2015 2019 2016 2020 Product Code B b B b TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 Week Code Table WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 WK13 A B C D E F G H I J K L M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v w x y z F. PCB FOOTPRINT: G. PACKING: 1. REEL DIMENSION (Please refer to FR-75D10 for packing quantity) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 2. TAPE DIMENSION Direction of feed H. RECOMMENDED REFLOW PROFILE: 1. Preheating shall be fixed at 150~180℃ for 60~90 seconds. 2. Ascending time to preheating temperature 150℃ shall be 30 seconds min. 3. Heating shall be fixed at 220℃ for 50~80 seconds and at 260℃+0/-5℃ peak (20~40sec). 4. Time: 2 times. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7