TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Tao-Yuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Product Specifications Approval Sheet Product Description: 118.3 MHz 0.15 MHz BW SMD 13.3X6.5 mm IF SAW Filter TST Parts No.: TB1202A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Kazuma Lee Approval by: Bob Chau Date: 10 / 06 / 2015 1. Customer signed back is required before TST can proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the changes TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-02 TAI-SAW TECHNOLOGY CO., LTD. No.3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 118.3MHz (SMD 13.3×6.5 mm) MODEL NO.: TB1202A Rev. NO. 1.0 A. MAXIMUM RATINGS: 1. Operating Temperature: -30°C to 85°C 2. Storage Temperature: -40°C to 85°C 3. Input Power: 10 dBm 4. DC Voltage : 5V 5. Implementation of IIP3: 28dBm min. RoHS Compliant Lead free Lead-free soldering Electrostatic Sensitive Device B. ELECTRICAL CHARACTERISTICS: Characteristics Min. Center frequency FC Value Typ. Max. MHz - 118.3 Insertion Loss at Fo MHz - 6.9 8.5 -1dB Bandwidth kHz - 128 - -3dB Bandwidth kHz 150 237 - dB - 0.2 1 usec - 0.2 1 - 0.5 4 5 10 15 30 37 45 9 36 34 35 41 50 -0.036 - Passband Ripple (Fo +/-30KHz) Group Delay variation (Fo +/-12.5KHz) Group Delay variation (Fo +/-75KHz) Relative Attenuation Fc ±200KHz ~ Fc ±400KHz Fc ±400KHz ~ Fc ±600KHz Fc ±600KHz ~ Fc ±1.0MHz Fc ±1.0MHz ~ Fc ±3.0MHz Fc ±3.0MHz ~ Fc ±15.0MHz Fc ±15.0MHz ~ Fc ±80.0MHz Temperature Coefficient usec dB ppm/°C2 - Source Impedance (Differential) - 200 - Load Impedance (Differential) - 200 - TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. FREQUENCY CHARACTERISTICS: (1) Narrow Band Response: (2) Pass Band Response and Group Time Delay Response: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 (3) Smith Chart: (4) Wide Band Response: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 D. OUTLINE DRAWING: #L: Input #M: Balanced Input #E: Output #F: Balanced Output #A, B, C, D, G, H, I, J: Ground □: Week Code Unit: mm △ : Product / Year Code Year Product Code 2013 2017 2014 2018 2015 2019 2016 2020 B b B b Week Code Table WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 WK13 A B C D E F G H I J K L M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u TAI-SAW TECHNOLOGY CO., LTD. v w x y TST DCC Release document z 5 E. MATCHING CIRCUIT: L1=L2=150nH+15nH L3=L4=120nH+15nH C1=18pF C2=24pF F. PCB FOOTPRINT: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 G.PACKING: 1. REEL DIMENSION (Please refer to FR-75D10 for packing quantity) 2. TAPE DIMENSION TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7 H. RECOMMENDED REFLOW PROFILE: 1. Preheating shall be fixed at 150~180℃ for 60~90 seconds. 2. Ascending time to preheating temperature 150℃ shall be 30 seconds min. 3. Heating shall be fixed at 220℃ for 50~80 seconds and at 260℃+0/-5℃ peak (20~40sec). 4. Time: 2 times. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 8