Data Sheet

D-3
BC54PAS; BC55PAS; BC56PAS
DF
N2
020
45V/60V/80V, 1A NPN medium power transistors
Rev. 1 — 11 November 2014
Product data sheet
1. Product profile
1.1 General description
NPN medium power transistor series encapsulated in an ultra thin
DFN2020D-3 (SOT1061D) leadless small Surface-Mounted Device (SMD) plastic
package with medium power capability and visible and solderable side pads.
Table 1.
Product overview
Type number[1]
Package
BC54PAS
DFN2020D-3
PNP complement
SOT1061D
BC51PAS
BC55PAS
BC52PAS
BC56PAS
BC53PAS
[1]
Valid for all available selection groups.
1.2 Features and benefits
 High collector current capability IC and  Three current gain selections
ICM
 Reduced Printed-Circuit Board (PCB)
 Leadless very small SMD plastic
area requirements
package with medium power capability
 Exposed heat sink for excellent thermal  Suitable for Automatic Optical
and electrical conductivity
Inspection (AOI) of solder joint
 AEC-Q101 qualified
1.3 Applications
 Linear voltage regulators
 Battery driven devices
 MOSFET drivers
 Low-side switches
 Power management
 Amplifiers
1.4 Quick reference data
Table 2.
Quick reference data
Symbol
Parameter
Conditions
VCEO
collector-emitter voltage
open base
IC
Min
Typ
Max Unit
BC54PAS
-
-
45
V
BC55PAS
-
-
60
V
BC56PAS
-
-
80
V
-
-
1
A
collector current
BC54PAS; BC55PAS; BC56PAS
NXP Semiconductors
45V/60V/80V, 1A NPN medium power transistors
Table 2.
Quick reference data …continued
Symbol
Parameter
Conditions
Min
Typ
Max Unit
ICM
peak collector current
single pulse; tp  1 ms
-
-
2
VCE = 2 V; IC = 150 mA
[1]
63
-
250
VCE = 2 V; IC = 150 mA
[1]
63
-
160
VCE = 2 V; IC = 150 mA
[1]
100
-
250
DC current gain
hFE
hFE selection -10
hFE selection -16
[1]
A
Pulse test: tp  300 s;   0.02
2. Pinning information
Table 3.
Pinning
Pin
Description
1
base
2
emitter
3
collector
Simplified outline
Graphic symbol
3
3
1
2
1
2
sym021
Transparent top view
3. Ordering information
Table 4.
Ordering information
Type number[1]
BC54PAS
Package
Name
Description
Version
DFN2020D-3
DFN2020D-3: plastic thermal enhanced ultra thin small outline
package; no leads; 3 terminals; body 2  2  0.65 mm.
SOT1061D
BC55PAS
BC56PAS
[1]
Valid for all available selection groups.
BC54_55_56PAS_SER
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 11 November 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
2 of 14
BC54PAS; BC55PAS; BC56PAS
NXP Semiconductors
45V/60V/80V, 1A NPN medium power transistors
4. Marking
Table 5.
Marking codes
Type number
Marking code
BC54PAS
CD
BC54-10PAS
CE
BC54-16-PAS
CF
BC55PAS
CG
BC55-10PAS
CH
BC55-16PAS
CJ
BC56PAS
CK
BC56-10PAS
CL
BC56-16PAS
CM
5. Limiting values
Table 6.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Conditions
VCBO
collector-base voltage
open emitter
VCEO
BC54_55_56PAS_SER
Product data sheet
Min
Max
Unit
BC54PAS
-
45
V
BC55PAS
-
60
V
BC56PAS
-
100
V
BC54PAS
-
45
V
BC55PAS
-
60
V
BC56PAS
-
80
V
-
5
V
-
1
A
-
2
A
-
0.3
A
collector-emitter voltage
VEBO
emitter-base voltage
IC
collector current
ICM
peak collector current
IB
base current
open base
open collector
single pulse;
tp  1 ms
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 11 November 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
3 of 14
BC54PAS; BC55PAS; BC56PAS
NXP Semiconductors
45V/60V/80V, 1A NPN medium power transistors
Table 6.
Limiting values …continued
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Ptot
Parameter
Conditions
total power dissipation
Tamb  25 C
Min
Max
Unit
[1]
-
0.42
W
[2]
-
0.81
W
[3]
-
0.83
W
[4]
-
1.10
W
[5]
-
1.65
W
Tj
junction temperature
-
150
C
Tamb
ambient temperature
55
150
C
Tstg
storage temperature
65
150
C
[1]
Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard
footprint.
[2]
Device mounted on an FR4 PCB, 4-layer copper, tin-plated and standard footprint.
[3]
Device mounted on an FR4 PCB, single-sided copper, tin-plated and mounting pad for collector 1 cm2.
[4]
Device mounted on an FR4 PCB, single-sided copper, tin-plated and mounting pad for collector 6 cm2.
[5]
Device mounted on an FR4 PCB, 4-layer copper, tin-plated and mounting pad for collector 1 cm2.
006aac676
2.0
Ptot
(W)
(1)
1.5
(2)
1.0
(3)
(4)
0.5
0.0
–75
(5)
–25
25
75
125
175
Tamb (°C)
(1) FR4 PCB, 4-layer copper, 1 cm2
(2) FR4 PCB, single-sided copper, 6 cm2
(3) FR4 PCB, single-sided copper, 1 cm2
(4) FR4 PCB, 4-layer copper, standard footprint
(5) FR4 PCB, single-sided copper, standard footprint
Fig 1.
BC54_55_56PAS_SER
Product data sheet
Power derating curves
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 11 November 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
4 of 14
BC54PAS; BC55PAS; BC56PAS
NXP Semiconductors
45V/60V/80V, 1A NPN medium power transistors
6. Thermal characteristics
Table 7.
Symbol
Rth(j-a)
Rth(j-sp)
Thermal characteristics
Parameter
Conditions
thermal resistance from junction
to ambient
thermal resistance from junction
to solder point
in free air
Max
Unit
[1]
298
K/W
[2]
154
K/W
[3]
151
K/W
[4]
114
K/W
[5]
76
K/W
20
K/W
in free air
[1]
Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard
footprint.
[2]
Device mounted on an FR4 PCB, 4-layer copper, tin-plated and standard footprint.
[3]
Device mounted on an FR4 PCB, single-sided copper, tin-plated and mounting pad for collector 1 cm2.
[4]
Device mounted on an FR4 PCB, single-sided copper, tin-plated and mounting pad for collector 6 cm2.
[5]
Device mounted on an FR4 PCB, 4-layer copper, tin-plated and mounting pad for collector 1 cm2.
006aac683
103
Zth(j-a)
(K/W)
duty cycle = 1
0.75
0.5
0.33
0.25
0.2
102
0.1
0.05
10
0.02
1
0.01
0
10–1
10–5
10–4
10–3
10–2
10–1
1
10
102
103
tp (s)
FR4 PCB, single-sided copper, tin-plated and standard footprint
Fig 2.
Transient thermal impedance from junction to ambient as a function of pulse duration; typical values
BC54_55_56PAS_SER
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 11 November 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
5 of 14
BC54PAS; BC55PAS; BC56PAS
NXP Semiconductors
45V/60V/80V, 1A NPN medium power transistors
006aac686
103
Zth(j-a)
(K/W)
duty cycle = 1
102
0.75
0.5
0.25
0.33
0.2
0.1
10
0.05
0.02
1
0
10–1
10–5
0.01
10–4
10–3
10–2
10–1
1
10
102
103
tp (s)
FR4 PCB, 4-layer copper, tin-plated and standard footprint
Fig 3.
Transient thermal impedance from junction to ambient as a function of pulse duration; typical values
006aac684
103
Zth(j-a)
(K/W)
102
10
duty cycle = 1
0.75
0.5
0.33
0.25
0.2
0.1
0.05
0.02
1
0.01
0
10–1
10–5
10–4
10–3
10–2
10–1
1
10
102
103
tp (s)
FR4 PCB, single-sided copper, tin-plated and mounting pad for collector 1 cm2
Fig 4.
Transient thermal impedance from junction to ambient as a function of pulse duration; typical values
BC54_55_56PAS_SER
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 11 November 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
6 of 14
BC54PAS; BC55PAS; BC56PAS
NXP Semiconductors
45V/60V/80V, 1A NPN medium power transistors
006aac685
103
Zth(j-a)
(K/W)
duty cycle = 1
0.75
0.5
0.33
0.25
0.2
102
0.1
10
1
0
10–1
10–5
0.05
0.02
0.01
10–4
10–3
10–2
10–1
1
10
102
103
tp (s)
FR4 PCB, single-sided copper, tin-plated and mounting pad for collector 6 cm2
Fig 5.
Transient thermal impedance from junction to ambient as a function of pulse duration; typical values
006aac687
103
Zth(j-a)
(K/W)
102
duty cycle = 1
0.75
0.5
0.25
10
0.1
1
0
10–1
10–5
0.33
0.2
0.05
0.02
0.01
10–4
10–3
10–2
10–1
1
10
102
103
tp (s)
FR4 PCB, 4-layer copper, tin-plated and mounting pad for collector 1 cm2
Fig 6.
Transient thermal impedance from junction to ambient as a function of pulse duration; typical values
BC54_55_56PAS_SER
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 11 November 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
7 of 14
BC54PAS; BC55PAS; BC56PAS
NXP Semiconductors
45V/60V/80V, 1A NPN medium power transistors
7. Characteristics
Table 8.
Characteristics
Tamb = 25 C unless otherwise specified
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
ICBO
collector-base cut-off current
VCB = 30 V; IE = 0 A
-
-
100
nA
VCB = 30 V; IE = 0 A; Tj = 150 C
-
-
10
A
IEBO
emitter-base cut-off current
VEB = 5 V; IC = 0 A
-
-
100
nA
hFE
DC current gain
VCE = 2 V; IC = 5 mA
hFE selection -10
hFE selection -16
63
-
-
VCE = 2 V; IC = 150 mA
[1]
63
-
250
VCE = 2 V; IC = 500 mA
[1]
40
-
-
VCE = 2 V; IC = 150 mA
[1]
63
-
160
VCE = 2 V; IC = 150 mA
[1]
100
-
250
-
-
500
mV
-
-
1
V
VCEsat
collector-emitter saturation
voltage
IC = 500 mA; IB = 50 mA
[1]
VBE
base-emitter voltage
VCE = 2 V; IC = 500 mA
[1]
Cc
collector capacitance
VCB = 10 V; IE = ie = 0 A; f = 1 MHz
-
6
-
pF
fT
transition frequency
VCE = 5 V; IC = 50 mA; f = 100 MHz
100
180
-
MHz
[1]
Pulse test: tp  300 s;   0.02
40
30
006aac691
300
006aaa084
1.6
IB (mA) = 50
45
35
IC
(A)
hFE
1.2
(1)
25
20
200
15
(2)
0.8
100
10
5
(3)
0.4
0
10–4
10–3
10–2
10–1
0
1
0
10
0.4
IC (A)
0.8
1.2
1.6
2.0
VCE (V)
Tamb = 25 C
VCE = 2 V
(1) Tamb = 100 C
(2) Tamb = 25 C
(3) Tamb = 55 C
Fig 7.
DC current gain as a function of collector
current; typical values
BC54_55_56PAS_SER
Product data sheet
Fig 8.
Collector current as a function of
collector-emitter voltage; typical values
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 11 November 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
8 of 14
BC54PAS; BC55PAS; BC56PAS
NXP Semiconductors
45V/60V/80V, 1A NPN medium power transistors
006aac692
1.2
006aac693
1
VBE
(V)
VCEsat
(V)
(1)
0.8
(2)
10–1
(3)
(1)
0.4
(2)
(3)
0.0
10–1
1
10
102
10–2
10–1
103
104
IC (mA)
1
10
VCE = 2 V
IC/IB = 10
(1) Tamb = 55 C
(1) Tamb = 100 C
(2) Tamb = 25 C
(2) Tamb = 25 C
(3) Tamb = 100 C
(3) Tamb = 55 C
Fig 9.
Base-emitter voltage as a function of collector
current; typical values
102
103
104
IC (mA)
Fig 10. Collector-emitter saturation voltage as a
function of collector current; typical values
8. Test information
8.1 Quality information
This product has been qualified in accordance with the Automotive Electronics Council
(AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is
suitable for use in automotive applications.
9. Package outline
1.3
1
0.04
max
2
1.1
0.9
0.3
0.2
0.65
max
0.45
0.35
0.35
0.25
2.1
1.9
3
1.6
1.4
2.1
1.9
Dimensions in mm
14-03-18
Fig 11. Package outline DFN2020D-3 (SOT1061D)
BC54_55_56PAS_SER
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 11 November 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
9 of 14
BC54PAS; BC55PAS; BC56PAS
NXP Semiconductors
45V/60V/80V, 1A NPN medium power transistors
10. Soldering
Footprint information for reflow soldering of DFN2020D-3 package
SOT1061D
2.1
1.7
1.3
0.4 (2x)
0.5 (2x)
0.3 (2x)
0.5 (2x) 0.6 (2x) 0.7 (2x)
0.25
1.1
0.35
2.5
0.3
0.25
2.3
0.25
1
0.35
1.1
0.35
1.2
0.35
0.3
0.4
0.5
1.5
1.6
1.7
occupied area
solder resist
solder lands
solder paste
Dimensions in mm
Issue date
14-03-05
14-03-12
sot1061d_fr
Fig 12. Reflow soldering footprint DFN2020D-3 (SOT1061D)
BC54_55_56PAS_SER
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 11 November 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
10 of 14
BC54PAS; BC55PAS; BC56PAS
NXP Semiconductors
45V/60V/80V, 1A NPN medium power transistors
11. Revision history
Table 9.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
BC54_55_56PAS_SER v.1
20141111
Product data sheet
-
-
BC54_55_56PAS_SER
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 11 November 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
11 of 14
BC54PAS; BC55PAS; BC56PAS
NXP Semiconductors
45V/60V/80V, 1A NPN medium power transistors
12. Legal information
12.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
12.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
12.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
BC54_55_56PAS_SER
Product data sheet
Suitability for use in automotive applications — This NXP
Semiconductors product has been qualified for use in automotive
applications. Unless otherwise agreed in writing, the product is not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at the customer's own
risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 11 November 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
12 of 14
NXP Semiconductors
BC54PAS; BC55PAS; BC56PAS
45V/60V/80V, 1A NPN medium power transistors
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
12.4 Trademarks
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
13. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
BC54_55_56PAS_SER
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 11 November 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
13 of 14
NXP Semiconductors
BC54PAS; BC55PAS; BC56PAS
45V/60V/80V, 1A NPN medium power transistors
14. Contents
1
1.1
1.2
1.3
1.4
2
3
4
5
6
7
8
8.1
9
10
11
12
12.1
12.2
12.3
12.4
13
14
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General description . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Quick reference data . . . . . . . . . . . . . . . . . . . . 1
Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
Ordering information . . . . . . . . . . . . . . . . . . . . . 2
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3
Thermal characteristics . . . . . . . . . . . . . . . . . . 5
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Test information . . . . . . . . . . . . . . . . . . . . . . . . . 9
Quality information . . . . . . . . . . . . . . . . . . . . . . 9
Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 9
Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 11
Legal information. . . . . . . . . . . . . . . . . . . . . . . 12
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 12
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Contact information. . . . . . . . . . . . . . . . . . . . . 13
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP Semiconductors N.V. 2014.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 11 November 2014
Document identifier: BC54_55_56PAS_SER
Similar pages