DC-AC INVERTER UNIT PS-DA0403-01(S) (30 W QUAD OUTPUTS) (PRELIMINARY INFORMATION) DESCRIPTION : This low profile DC to AC Inverter is developed for quad lamps. APPLICABLE LCD: 6.4 to 15 inches quad lamp type Lamp Voltage 714 Vrms Lamp Current 4 x 10,5 mArms Lamp Start Up Voltage 1.700 Vrms (Vin : 12 Vdc) FEATURES : Remote ON/OFF Open Lamp Detection RoHS compliant (S) TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range Humidity DIMENSIONS : LxWxH 0°C ~ +50°C -20°C ~ +85°C 95 %RH max 220 x 50 x 10 mm Pin 1 Unit : mm Weight :67 (g) typ. Pin 1 Pin 1 Pin 1 Note: Please use plastic screw in case of a non-insulating mounting base! Components No. 1 2 3 Part Description PCB Connector CN1 Connector CN2 + CN3 Input side CN1: Pin No. Symbols Vin CN 1-1 Vin CN 1-2 GND CN 1-3 GND CN 1-4 Vrm t CN 1-5 GND CN 1-6 CN 1-7 Vbr Qty. 1 1 2 Material UL94V-0 (FR-4 or CEM-3) S7B-PH-SM3-1-TB SM04(4.0)B-BHS-1-TB Output side CN2: Pin No. Symbols Ratings Vhigh 714 Vrm s (10.5 m Arm s ) CN 2-1+2 N.C. CN 2-3 Vlow (GND) CN 2-4 Ratings 10.8 ~ 13.2 Vdc 10.8 ~ 13.2 Vdc 0 ~ 0.4 = OFF / 4.5 ~ Vin = ON 0 ~ 3.3 Vdc Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Note t=1m m JST or equal JST or equal Output side CN3: Pin No. Symbols Ratings Vhigh 714 Vrm s (10.5 m Arm s ) CN 3-1+2 N.C. CN 3-3 Vlow (GND) CN 3-4 Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (1) Version 1.6.3, 07th September 2010 DC-AC INVERTER UNIT PS-DA0403-01(S) (30 W QUAD OUTPUTS) (PRELIMINARY INFORMATION) ELECTRICAL CHARACTERISTICS : Parameters Symbols Output Current Output Current Input Current Frequency Open Circuit Voltage Iout Iout Iin F Vopen Ts d No load Shutdown Note 1 : Conditions Vrmt Vin (V) Tu (°C) (V) 12±1.2 5±0.25 0 ~ +50 12±0.6 5±0.25 0 ~ +50 12±1.2 5±0.25 0 ~ +50 12±1.2 5±0.25 0 ~ +50 11.4 5±0.25 0 ~ +50 12±1.2 Specification 5±0.25 0 ~ +50 Unit Note Min. Typ. Max. 10.0 2.5 40 1.600 10.5 3.0 2.1 52 1.700 11.0 3.5 2.3 60 2.000 m Arm s m Arm s Adc kHz Vrm s 1.0 - - s ec V br = 0 V dc V br = 3.3 V dc wit hout load Please keep minimum of 2mm clearance (all directions) between inverter high voltage area as marked on mechanical drawing and any conductors. TEST CIRCUIT : F SW4 SW 1 Operation of unit a Operation b Non operation CN2-2 CN1-3 CN1-4 a V V ~ CN2-1 CN1-1 CN1-2 V Vrmt 0 / 5 Vdc Vopen SW3 Iin A Vin 12 V 1000:1 PROBE F b RL2 T1 CN2-4 SW1 CN1-5 RL1 A ~ CL2 Iout 2 A ~ CL2 Iout 2 CL1 A ~ Iout 1 SW5 SW3 CN3-1 SW4 CN1-6 CN3-2 RL2 CN1-7 Vbr 0 ~ 3.3 Vdc CN3-4 RL1 CL1 A ~ Iout 1 SW5 Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (2) Version 1.6.3, 07th September 2010