14 Pin Flip-Chip, 4.3x3.73 mm, SCV6904HTR

MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
14 PIN FLIP−CHIP
CASE 499AQ−01
ISSUE O
DATE 17 JUN 2005
1
SCALE 3:1
4X
0.10 C
TERMINAL A1
LOCATOR
D
ÇÇ
ÇÇ
A
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. COPLANARITY APPLIES TO SPHERICAL
CROWNS OF SOLDER BALLS.
B
DIM
A
A1
A2
b
D
D1
D2
E
E1
E2
e
h
h1
h2
h3
E
A1
A2
0.10 C
A
0.05 C
C
D1
2X
SEATING
PLANE
D2
h1
h
e
e
2X
F
14 X
MILLIMETERS
MIN
NOM
MAX
−−−
0.692
0.742
0.142
0.167
0.192
0.500
0.525
0.550
0.190
0.220
0.224
4.300 BSC
1.983 BSC
1.949 BSC
3.730 BSC
1.016 BSC
1.075 BSC
0.716 BSC
0.648 BSC
0.514 BSC
0.034 BSC
0.029 BSC
E1
E
b
0.05 C A B
0.03 C
h3
D
C
h2
B
A
E2
1
DOCUMENT NUMBER:
2
3
4
5
6
98AON20914D
Electronic versions are uncontrolled except when
accessed directly from the Document Repository. Printed
STATUS: ON SEMICONDUCTOR STANDARD
versions are uncontrolled except when stamped
“CONTROLLED COPY” in red.
NEW STANDARD:
© Semiconductor Components Industries, LLC, 2002
Case Outline Number:
http://onsemi.com
14 PIN FLIP−CHIP, SCV6904, 4.3
DESCRIPTION:
October, 2002
− Rev. 0
PAGE 1 OFXXX
2
1 X 3.73 MM
DOCUMENT NUMBER:
98AON20914D
PAGE 2 OF 2
ISSUE
O
REVISION
RELEASED FOR PRODUCTION. REQ BY S. WHITE.
DATE
17 JUN 2005
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any
liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over
time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under
its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body,
or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death
may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees,
subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of
personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part.
SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
© Semiconductor Components Industries, LLC, 2005
Jun, 2005 − Rev. 01O
Case Outline Number:
499AQ
Similar pages