746

SENSITRON
SEMICONDUCTOR
SHD225402
TECHNICAL DATA
DATA SHEET 746, REV. -
HERMETIC POWER MOSFET
N-CHANNEL
FEATURES:
œ 100 Volt, 0.077 Ohm, 28A MOSFET
œ Isolated Hermetic Metal Package
œ Fast Switching
œ Low RDS (on)
œ Equivalent to IRFM140 Series
œ Add Suffix ‘C’ to the Part Number for Ceramic Seals
MAXIMUM RATINGS
RATING
GATE TO SOURCE VOLTAGE
ON-STATE DRAIN CURRENT
ALL RATINGS ARE AT TC = 25•C UNLESS OTHERWISE SPECIFIED.
@ TC = 25•C
@ TC = 100•C
PULSED DRAIN CURRENT
@ TC = 25•C
OPERATING AND STORAGE TEMPERATURE
THERMAL RESISTANCE, JUNCTION TO CASE
TOTAL DEVICE DISSIPATION @ TC = 25•C
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
DRAIN TO SOURCE BREAKDOWN VOLTAGE
VGS = 0V, ID = 1.0mA
STATIC DRAIN TO SOURCE ON STATE RESISTANCE
VGS = 10V, ID = 20A
GATE THRESHOLD VOLTAGE
VDS = VGS, ID = 250mA
FORWARD TRANSCONDUCTANCE
VDS ˜ 15V, ID = 20A
ZERO GATE VOLTAGE DRAIN CURRENT
VDS = 0.8xMax. Rating, VGS = 0V
VDS = 0.8xMax. Rating, VGS = 0V, TJ = 125•C
GATE TO SOURCE LEAKAGE FORWARD
VGS = 20V
GATE TO SOURCE LEAKAGE REVERSE
VGS = -20V
TURN ON DELAY TIME
VDD = 50V,
RISE TIME
ID = 20A,
TURN OFF DELAY TIME
RG = 9.1W
FALL TIME
DIODE FORWARD VOLTAGE
TJ = 25•C, IS = 28A,
VGS = 0V
REVERSE RECOVERY TIME
TJ = 25•C,
IF = 28A,
di/ds = 100A/msec, VDD ˆ 50V
INPUT CAPACITANCE
VGS = 0 V
OUTPUT CAPACITANCE
VDS = 25 V
REVERSE TRANSFER CAPACITANCE
f = 1.0MHz
SYMBOL
VGS
ID
TYP.
-
MAX.
–20
28
20
112
+150
0.88
140
UNITS
Volts
Amps
IDM
TOP/TSTG
R JC
PD
MIN.
-55
-
SYMBOL
BVDSS
MIN.
100
TYP.
-
MAX.
-
UNITS
Volts
-
-
2.0
9.1
-
0.077
4.0
-
W
Volts
S(1/W)
-
-
mA
IGSS
-
-
td(ON)
tr
td(OFF)
tf
VSD
-
-
-
-
25
250
100
-100
21
145
64
105
1.5
trr
-
-
400
Ciss
Coss
Crss
-
1600
550
120
-
RDS(ON)
VGS(th)
gfs
IDSS
221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798
World Wide Web Site - http://www.sensitron.com E-mail Address - [email protected]
Amps
•C
•C/W
Watts
nA
nsec
Volts
nsec
pF
SHD225402
SENSITRON
DATA SHEET 746
REVISION -
MECHANICAL DIMENSIONS: in Inches / mm
.149 (3.78
Dia.
.139 3.53)
(6.60
6.32)
(1.27
1.02)
.800 (20.32
.790 20.07) .545 (13.84
.535 13.58)
.685 (17.40
.665 16.89)
1.235 (31.37
1.195 30.35)
.260
.249
.050
.040
.545 (13.84
.535 13.60)
1
.045 (1.14
.035 0.89)
3 Places
2
3
.150(3.81) BSC
2 Places
.150(3.81) BSC
TO-254
PINOUT TABLE
DEVICE TYPE
MOSFET
TO-254 PACKAGE
PIN 1
DRAIN
PIN 2
SOURCE
PIN 3
GATE
221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798
World Wide Web Site - http://www.sensitron.com E-mail Address - [email protected]
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version
of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement.
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
• 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected]
Similar pages