VS-HFA280NJ60CPbF www.vishay.com Vishay Semiconductors HEXFRED® Ultrafast Soft Recovery Diode, 280 A FEATURES Lug terminal anode 1 Lug terminal anode 2 • Very low Qrr and trr • UL approved file E222165 • Designed and qualified for industrial level • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Base common cathode TO-244 BENEFITS • Reduced RFI and EMI • Reduced snubbing DESCRIPTION PRODUCT SUMMARY IF(AV) 280 A VR 600 V IF(DC) at TC 149 A at 100 °C Package TO-244 (TO-244AB) Circuit Two diodes common cathode HEXFRED® diodes are optimized to reduce losses and EMI/RFI in high frequency power conditioning systems. An extensive characterization of the recovery behavior for different values of current, temperature and dIF/dt simplifies the calculations of losses in the operating conditions. The softness of the recovery eliminates the need for a snubber in most applications. These devices are ideally suited for power converters, motors drives and other applications where switching losses are significant portion of the total losses. ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Cathode to anode voltage VR Continuous forward current IF Single pulse forward current Non-repetitive avalanche energy Maximum power dissipation Operating junction and storage temperature range TEST CONDITIONS MAX. UNITS 600 V TC = 25 °C 292 TC = 100 °C 149 IFSM Limited by junction temperature 600 EAS L = 100 μH, duty cycle limited by maximum TJ 2.2 TC = 25 °C 657 TC = 100 °C 263 PD TJ, TStg A mJ W -55 to +150 °C ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS Cathode to anode breakdown voltage VBR IR = 100 μA Maximum forward voltage VFM IF = 210 A IF = 105 A See fig. 1 IF = 105 A, TJ = 125 °C Maximum reverse leakage current IRM TJ = 125 °C, VR = 600 V See fig. 2 Junction capacitance CT VR = 200 V See fig. 3 Series inductance LS From top of terminal hole to mounting plane MIN. TYP. MAX. 600 - - UNITS - 1.33 1.8 - 1.53 2.1 - 1.22 1.64 - 2.4 8 - 280 400 pF - 5.0 - nH V mA Revision: 26-Mar-14 Document Number: 94067 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-HFA280NJ60CPbF www.vishay.com Vishay Semiconductors DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 °C unless otherwise specified) PARAMETER SYMBOL Reverse recovery time See fig. 5 trr Peak recovery current See fig. 6 TYP. MAX. - 39 - TJ = 25 °C - 92 140 - 180 270 - 9.3 17 - 16 30 - 490 1200 TJ = 125 °C - 1400 4000 TJ = 25 °C - 290 - TJ = 125 °C - 200 - SYMBOL MIN. TYP. MAX. UNITS TJ, TStg -55 - 150 °C - - 0.19 - - 0.095 - 0.10 - - 68 - g oz. TJ = 25 °C dI(rec)M/dt UNITS TJ = 125 °C TJ = 125 °C Qrr Peak rate of recovery current See fig. 8 MIN. TJ = 25 °C IRRM Reverse recovery charge See fig. 7 TEST CONDITIONS IF = 1.0 A, dIF/dt = 200 A/μs, VR = 30 V IF = 105 A dIF/dt = 200 A/μs VR = 200 V ns A nC A/μs THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range per leg Thermal resistance, junction to case per module Typical thermal resistance, case to heatsink RthJC RthCS Weight - 2.4 - 30 (3.4) - 40 (4.6) 12 (1.4) - 18 (2.1) 30 (3.4) - 40 (4.6) Vertical pull - - 80 2" lever pull - - 35 Mounting torque (1) center hole Terminal torque °C/W K/W N m (lbf in) lbf in 10 000 1000 TJ = 150 °C IR - Reverse Current (µA) IF - Instantaneous Forward Current (A) Note (1) Mounting surface must be smooth, flat, free of burrs or other protrusions. Apply a thin even film or thermal grease to mounting surface. Gradually tighten each mounting bolt in 5 to 10 lbf in steps until desired or maximum torque limits are reached. 100 TJ = 150 °C TJ = 125 °C TJ = 25 °C 10 1 0.2 0.7 1.2 1.7 2.2 2.7 3.2 TJ = 125 °C 1000 100 10 1 100 TJ = 25 °C 200 300 400 500 600 VFM - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Maximum Forward Voltage Drop vs. Instantaneous Forward Current (Per Leg) Fig. 2 - Typical Reverse Current vs. Reverse Voltage (Per Leg) Revision: 26-Mar-14 Document Number: 94067 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-HFA280NJ60CPbF www.vishay.com Vishay Semiconductors CT - Junction Capacitance (pF) 10 000 70 TJ = 125 °C TJ = 25 °C 60 1000 IRRM (A) 50 TJ = 25 °C IF = 200 A IF = 140 A IF = 50 A 40 30 20 10 100 1 10 100 0 100 1000 1000 VR - Reverse Voltage (V) dIF/dt (A/µs) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) Fig. 6 - Typical Recovery Current vs. dIF/dt (Per Leg) 160 5000 TJ = 125 °C TJ = 25 °C 4000 120 100 Qrr (nC) Maximum Allowable Case Temperature (°C) 140 DC 80 60 D = 0.50 IF = 200 A IF = 140 A IF = 50 A 3000 2000 40 1000 20 0 0 50 100 150 200 250 300 0 100 350 1000 IF(AV) - DC Forward Current (A) dIF/dt (A/µs) Fig. 4 - Maximum Allowable Case Temperature vs. DC Forward Current (Per Leg) Fig. 7 - Typical Stored Charge vs. dIF/dt (Per Leg) 10 000 300 IF = 200 A IF = 140 A IF = 50 A trr (ns) 200 150 100 dI(rec)M/dt (A/µs) 250 TJ = 125 °C TJ = 25 °C 200 A 140 A 50 A 1000 50 TJ = 125 °C TJ = 25 °C 0 100 1000 100 100 1000 dIF/dt (A/µs) dIF/dt (A/µs) Fig. 5 - Typical Reverse Recovery Time vs. dIF/dt (Per Leg) Fig. 8 - Typical dI(rec)M/dt vs. dIF/dt (Per Leg) Revision: 26-Mar-14 Document Number: 94067 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-HFA280NJ60CPbF www.vishay.com Vishay Semiconductors ZthJC - Thermal Response 1 0.1 0.01 Single pulse (thermal response) 0.001 0.00001 0.0001 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 0.001 0.01 1 0.1 10 t1 - Rectangular Pulse Duration (s) Fig. 9 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) VR = 200 V 0.01 Ω L = 70 μH D.U.T. dIF/dt adjust D IRFP250 G S Fig. 10 - Reverse Recovery Parameter Test Circuit (3) trr IF ta tb 0 Qrr (2) IRRM (4) 0.5 IRRM dI(rec)M/dt (5) 0.75 IRRM (1) dIF/dt (1) dIF/dt - rate of change of current through zero crossing (2) IRRM - peak reverse recovery current (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. (4) Qrr - area under curve defined by trr and IRRM Qrr = trr x IRRM 2 (5) dI(rec)M/dt - peak rate of change of current during tb portion of trr Fig. 11 - Reverse Recovery Waveform and Definitions Revision: 26-Mar-14 Document Number: 94067 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-HFA280NJ60CPbF www.vishay.com Vishay Semiconductors L = 100 µH IL(PK) High-speed switch D.U.T. Freewheel diode Rg = 25 Ω + Current monitor Decay time Vd = 50 V V(AVAL) VR(RATED) Fig. 12 - Avalanche Test Circuit and Waveforms ORDERING INFORMATION TABLE Device code VS- HFA 280 NJ 60 C PbF 1 2 3 4 5 6 7 1 - Vishay Semiconductors product 2 - HEXFRED® family, electron irradiated 3 - Average current rating 4 - NJ = TO-224 5 - Voltage rating (600 V) 6 - C = Common cathode 7 - Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95021 Revision: 26-Mar-14 Document Number: 94067 5 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors TO-244 DIMENSIONS in millimeters (inches) 35 (1.37) REF. 13 (0.51) 7 (0.27) 6 (0.23) 17.5 (0.69) 16.5 (0.65) 40 (1.57) 80 (3.15) Ø 5.2 (Ø 0.20) 3 12.6 (0.5) Ø 7.2 (Ø 0.28) (2 places) 3 1 2 21 (0.82) 20 (0.78) ¼" - 20 UNC 9.6 (0.37) MIN. 93 (3.66) MAX. Revision: 24-Apr-15 Document Number: 95021 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000