Datasheet (PDF)

ED3344 Series
Hardened 10/100/BASE-TX M12 Ethernet Extender over
Coaxial Cable
UL508
Overview
The ED3344 Series Ethernet Extender enables the extension of Ethernet connectivity over existing coaxial cable allowing legacy
infrastructure to be leveraged for IP networks and extending the Ethernet distance limitations of 100 meters.
Upgrading an existing legacy control or surveillance system to a new IP-based system is a complicated task, especially when existing
cable infrastructure is old coaxial cable. EtherWAN’s ED3344 Series provides Ethernet connection and extension over these existing
coaxial cables minimizing the expense of pulling new cable infrastructure.
The ED3344 Series is built with hardened specifications, providing wide temperature operation range from -40°C to 75°C to
overcome severe outdoor environments. Featured with a M12 Ethernet connector, The ED3344 provides high mechanical strength
and suitable for railway applications. Incorporating VDSL technology, the ED3344’s BNC extender ports provide long distance
transmission with 75Mbps rate at 200 meters, or 1Mbps at 2600 meters; 10 speed LED indicators in the front panel provide easy
lookup for the connection speed
Spotlight
•UL508 Certification
◦◦ Specific design for industrial communication applications with UL508 safety certification
•EN50121-4 and EN50155 Certification
◦◦ Specific design for railway environment application
•Wide Operating Temperature
◦◦ -40°C to 75°C wide operating temperature range design is suitable for installation in outdoor cabinet
•M12 Ethernet Connector
◦◦ M12 Ethernet port provides strong mechanical strength
ED3344
1
www.EtherWAN.com
rev. A1.1
Hardware Specifications
Technology
Speed / Distance Reference
•IEEE802.3 10BASE-T
•IEEE802.3u 100BASE-TX
•IEEE802.3x full duplex and flow control
Speed
Distance
1-5Mbps
2,600M(8,530ft.)
6-10Mbps
2,400M(7,874ft.)
Processing Type
11-16Mbps
2,000M(6,561ft.)
17-20Mbps
1,800M(5,905ft.)
21-29Mbps
1,600M(5,249ft.)
30-43Mbps
1,400M(4,593ft.)
44-54Mbps
1,200M(3,937ft.)
55-63Mbps
1,000M(3,280ft.)
64-74Mbps
600M(1,968ft.)
75-85Mbps
200M(656ft.)
Standards
•Half-duplex back-pressure and IEEE802.3x Full-duplex flow
control
•Auto Negotiation
•Auto-MDI/MDIX
Power
Input Voltage
•12 to 48VDC (Terminal Block and Latched DC Jack)
Power Consumption
•7.2W Max. 0.6A @ 12VDC, 0.15A @ 48VDC
•Note: All speed selections are Symmetrical on the DSL and
Full-duplex on the Ethernet
Protection
•Over current protection
•Reverse polarity protection
Environment
Mechanical
Operating Temperature
•-40°C to 75°C (-40°F to 167°F)
Tested @ -40°C to 85°C (-40°F to 185°F)
Casing
•Aluminum case
•IP30
Storage Temperature
•-40°C to 85°C (-40°F to 185°F)
Dimensions
Ambient Relative Humidity
•50mm (W) x 110mm (D) x 135mm (H)
(1.97" (W) x 4.33" (D) x 5.31" (H))
•5% to 95% (non-condensing)
Weight
Regulatory Approvals
•0.8Kg (1.76lbs.)
ISO
Installation
•Manufactured in an ISO9001 facility
•DIN-Rail (Top hat type 35mm), Panel, or Rack mounting
Safety
UL508
EMI
FCC Part 15B, Class A
VCCI, Class A
EN61000-6-4, EN55022, EN61000-3-2 and EN61000-3-3
EMS
EM50121-3-2
Interface
Ethernet Port
•Port: One M12, 4Pin, D-type port
•Speed: 10/100Mbps
•Distance: 100meters (328ft.)
•Cable: 10BASE-T: UTP CAT. 3, 4, 5 (2-pair wire)
100BASE-TX: UTP CAT. 5 (4-pair wire)
Ethernet Extender Port
•One 50Ω BNC Port (with F-type connector)
•Speed: 1/5/10/20/30/40/50/60/70/75Mbps
•Distance: 2600 meters (8,530ft.)
•Cable: Coaxial Cable (5C2V/RG6AU)
•EN61000-6-2
•EN61000-4-2 (ESD Standards)
•EN61000-4-3 (Radiated RFI Standards)
•EN61000-4-4 (Burst Standards)
•EN61000-4-5 (Surge Standards)
•EN61000-4-6 (Induced RFI Standards)
•EN61000-4-8 (Magnetic Field Standards)
DIP-Switch
•One DIP Switch: Local (CO) or Remote (CPE)
Console Port
•Port: One DB9 RS-232 port
Environmental Test Compliance
EN61373 (Vibration and Shock)
IEC60068-2-6 Fc (Vibration Resistance)
IEC60068-2-27 Ea (Shock)
FED STD 101C Method 5007.1 (Free fall w/ package)
Industrial Compliance
EN50155 and EN50121-4
LED Indicators
•Per Unit: Power
•Per 10/100TX Port: Link/Activity, Full-duplex
•Line: Error, Link, Local, Remote
ED3344
2
www.EtherWAN.com
rev. A1.1
Dimensions
110mm (4.33”)
50mm
(1.97”)
135mm (5.31”)
Top
Front
Side
Back
Bottom
Application Diagram
ED3344
3
www.EtherWAN.com
rev. A1.1
Ordering Information
Model
ED3344-00B
Hardened 10/100Base-TX M12 Ethernet Extender over Coaxial Cable
Optional Accessories
KP-AA96-480
Panel mounting kit
MDR-40-48
40W/0.83A DIN-Rail 48VDC Industrial Power Supply (for Terminal Block)
DR-30-24
30W/1.5A DIN-Rail 24VDC Industrial Power Supply (for Terminal Block)
DR-60-24
60W/2.5A DIN-Rail 24VDC Industrial Power Supply (for Terminal Block)
DR-75-24
75W/3.2A DIN-Rail 24VDC Industrial Power Supply (for Terminal Block)
DR-120-24
120W/5A DIN-Rail 24VDC Industrial Power Supply (for Terminal Block)
41-136046-X
36W/3A 12VDC hardened power adapter with open wire in aluminum housing (for Terminal Block)
(X)=1: US, 2: EU, 3: UK, 4: AU, 5: JP, 6: SA
41-136044-X
36W/3A 12VDC hardened power adapter with latched DC jack in aluminum housing (for DC Jack)
(X)=1: US, 2: EU, 3: UK, 4: AU, 5: JP, 6: SA
ED3344
4
www.EtherWAN.com
rev. A1.1
Similar pages