OADM 100 GHz Single Channel Optical Add/Drop Multiplexer Specifications Parameter Specification Center Wavelength (λc) ITU Grid Channel Spacing 100 GHz Channel Pass Band ≥ λc ± 0.11 nm Insertion Loss (Express Channel) ≤ 0.5 dB Insertion Loss (Add/Drop Channel) ≤ 0.9 dB Pass Band Ripple ≤ 0.5 dB Adjacent Channel Isolation ≥ 25 dB Non-Adjacent Channel Isolation ≥ 40 dB Express Channel Isolation ≥ 12 dB Directivity ≥ 50 dB Return Loss ≥ 45 dB PDL ≤ 0.1 dB PMD ≤ 0.1 ps Maximum Power 300 mW Operating Temperature 0° C ~ + 65° C Storage Temperature - 40° C ~ + 85° C Package Dimensions Bare fiber (B) 5.5 mm (Ф) x 35 mm (L) 900 µm loose tube (L) 5.5 mm (Ф) x 40 mm (L) Note1: All values specified are without connectors. Note2: Higher performance specifications are available upon request. Note3: Fiber type Corning SMF-28e. Note4: Over operating temperature, all SOP. Ordering Information A D – – Type A: Add D: Drop 1 Channel Spacing 1: 100 GHz – – 1st ITU Channel # e.g. 23: 1558.98 nm 2210 Lind Ave SW, Suite 100 Renton, WA 98057 USA (425) 277-8000 ph (425) 277-5280 fax – Fiber Length A: 1 meter B: 1.5 meter S: Special – Pigtail Style (=Package style) B: bare fiber L: 900 m loose tube Connector 0: None 7: LC/UPC 1: FC/PC 8: LC/SPC 2: FC/APC 9: Special 3: SC/ PC A: FC/UPC 4: SC/APC B: SC/UPC 5: FC/SPC C: ST 6: SC/SPC [email protected] www.lightel.com