This product complies with the RoHS Directive (EU 2002/95/EC). Photo IC PNA4U23F (Tentative) Photodiode with amplifier functions For optical control systems Features Small package, × 52 speed Reflow soldering possible Absolute Maximum Ratings Ta = 25°C Parameter Symbol Rating Unit Operating supply voltage VCC 6 V Power dissipation PD 250 mW Operating ambient temperature Topr –20 to +70 °C Storage temperature Tstg –40 to +85 °C Operatong Condition Parameter Symbol Conditions Min Typ Max Unit Operating supply voltage VCC 4.5 5.0 5.5 V Reference voltage VREF 1.55 1.65 1.75 V Electrical Characteristics Ta = 25°C±3°C, VCC = 5.0 V, RL = 10 kW, CL = 20 pF, VR = 300 W Parameter Symbol Conditions Min Typ Max Unit Gain1 / Gain2 → Gain1 2.4 VCC V 0 0.99 V VSW1 CD VSW2 DVD Gain1 / Gain2 → Gain2 Output offset voltage VOFF [VOP - VON] No signal condition -20 0 20 mV Maximum output voltage *2 VOM [VOP - VON] Max. Reference to GND 2.0 2.2 V Maximum output voltage (+) *3 VOM+ [VOP - VON] Max. Reference to GND 1.0 1.1 V Maximum output voltage (-) *3 VOM- [VOP - VON] Max. Reference to GND -1.0 -1.1 V Gain1 [VOP - VON] λ = 780 nm 2.1 2.8 3.5 V/mW Gain2 [VOP - VON] λ = 650 nm 3.3 4.4 5.5 V/mW No signal condition 26.0 29.9 mA SW change voltage range Output sensitivity *1 Supply current Cutoff frequency ICC fC(-3dB) Rise time tr Fall time tf CD Gain1 20 log (VO (fC MHz) / VO (1 MHz)) = -3 80 90 MHz DVD Gain2 20 log (VO (fC MHz) / VO (1 MHz)) = -3 70 80 MHz CD VOP - VON = 2 V[p-p], 10% to 90%, Gain1 5 ns DVD VOP - VON = 2 V[p-p], 10% to 90%, Gain2 5 ns CD VOP - VON = 2 V[p-p], 10% to 90%, Gain1 5 ns DVD VOP - VON = 2 V[p-p], 10% to 90%, Gain2 5 ns Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes. 2. *1: Standard voltage level; VREF (Exclude output offset voltage) *2: Full saturation value *3: Linearity < 1% Publication date : February 2009 SHE00074AED 1 This product complies with the RoHS Directive (EU 2002/95/EC). PNA4U23F Electrical Characteristics (Continued) Ta = 25°C±3°C, VCC = 5.0 V, RL = 10 kW, CL = 20 pF, VR = 300 W Parameter Symbol Slew rate SR Settling time tset Mode selecting time tsel Conditions CD VOP - VON = 2 V[p-p] at Gain1, ±3% Min Typ Max Unit 200 300 V/µs 12 ns DVD VOP - VON = 2 V[p-p] at Gain2, ±3% 14 ns Gain-high ↔ Sleep ↔ Low 150 200 ns Note) Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes. Block Diagram SW 2 DVD 3 kΩ 1 kΩ CD 2 kΩ VCC 4 Buffer I/V Amp. 50 Ω VREF DUMMY R GAIN1(CD) 6 5 R GAIN2(DVD) VR2 VR1 2 37.5 Ω 8 37.5 Ω 7 VOUT+ 1 PD GND Buffer SHE00074AEK 3 Amp. IN VOUT− This product complies with the RoHS Directive (EU 2002/95/EC). PNA4U23F Package (Unit: mm) KPTFTN6K0004 Pin name 1: VCC 2: SW 3: Amp.IN 4: GND 5: R GAIN2 6: R GAIN1 7: VOUT− 8: VOUT+ SHE00074AEK 3 Request for your special attention and precautions in using the technical information and semiconductors described in this book (1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) The technical information described in this book is intended only to show the main characteristics and application circuit examples of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: – Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. – Any applications other than the standard applications intended. (4) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company. 20080805