Data Sheet - LM561B

Rev: 8.0
Product Family Data Sheet
LM561B
- 5630 Middle Power LED
Introduction
Features
 Beam Angle: 120˚
 Precondition : JEDEC Level 2a
 Dimension : 5.6 x 3.0 x 0.8 mm
 ESD withstand Voltage : up to ± 5KV [HBM]
SAMSUNG ELECTRONICS
95, Samsung2-Ro, Giheung-Gu,
Yongin-City, Gyeonggi-Do 446-711, KOREA
http://www.samsungled.com
1 / 48
Contents
1. Product Code Information
-----------------------
2. Characteristics
----------------------- 10
3. Typical Characteristics Graph
----------------------- 11
4. Outline Drawing & Dimension
----------------------- 17
5. Reliability Test Items & Conditions
----------------------- 18
6. Solder Conditions
----------------------- 19
7. Tape & Reel
----------------------- 20
8. Label Structure
----------------------- 22
9. Packing Structure
----------------------- 23
10. Precaution For Use
----------------------- 26
11. Hazard Substance Analysis Report
----------------------- 29
Revision History
http://www.samsungled.com
3
----------------------- 51
2 / 48
1. Product Code Information
1) Luminous Flux Bins (Ts = 25℃)
Nominal
CCT
2700K
3000K
3500K
4000K
5000K
5700K
6500K
Sorting Condition lm @65mA
Product Code
Flux Rank
Flux Range (Φv, lm)
SPMWH◆541MD5WAW☆S1
S1
24.0 ~ 26.0
SPMWH◆541MD5WAW☆S2
S2
26.0 ~ 28.0
SPMWH◆541MD5WAW☆S3
S3
28.0 ~ 30.0
SPMWH◆541MD5WAV☆S1
S1
24.5 ~ 26.5
SPMWH◆541MD5WAV☆S2
S2
26.5 ~ 28.5
SPMWH◆541MD5WAV☆S3
S3
28.5 ~ 30.5
SPMWH◆541MD5WAU☆S1
S1
25.0 ~ 27.0
SPMWH◆541MD5WAU☆S2
S2
27.0 ~ 29.0
SPMWH◆541MD5WAU☆S3
S3
29.0 ~ 31.0
SPMWH◆541MD5WAT☆S1
S1
26.0 ~ 28.0
SPMWH◆541MD5WAT☆S2
S2
28.0 ~ 30.0
SPMWH◆541MD5WAT☆S3
S3
30.0 ~ 32.0
SPMWH◆541MD5WAR☆S1
S1
27.0 ~ 29.0
SPMWH◆541MD5WAR☆S2
S2
29.0 ~ 31.0
SPMWH◆541MD5WAR☆S3
S3
31.0 ~ 33.0
SPMWH◆541MD5WAQ☆S1
S1
26.5 ~ 28.5
SPMWH◆541MD5WAQ☆S2
S2
28.5 ~ 30.5
SPMWH◆541MD5WAQ☆S3
S3
30.5 ~ 32.5
SPMWH◆541MD5WAP☆S1
S1
26.0 ~ 28.0
SPMWH◆541MD5WAP☆S2
S2
28.0 ~ 30.0
SPMWH◆541MD5WAP☆S3
S3
30.0 ~ 32.0
Notes:
1)SAMSUNG ELECTRONICS maintains a tolerance of ±5% on Luminous Flux measurements.
2)"◆" (the quantity of PKG on the Reel) can be "T"(2,500pcs) or "1"(10,000pcs).
3)Warm white : "☆" can be "0"(Whole Bin), "H"(Half Bin) or "M"(Quarter Bin) of the color binning.
Cool white : "☆" can be "0"(Whole Bin) or "M"(Quarter Bin) of the color binning.
http://www.samsungled.com
3 / 48
2) Color Bins (Ts = 25℃)
1) Color Binning
Nominal
CCT
Product Code
Color Rank
SPMWH◆541MD5WAW0S1
SPMWH◆541MD5WAW0S2
W0(Whole bin)
SPMWH◆541MD5WAW0S3
Chromaticity Bins
W1, W2, W3, W4, W5, W6, W7, W8,
W9, WA, WB, WC, WD, WE, WF, WG
SPMWH◆541MD5WAWHS1
2700K
SPMWH◆541MD5WAWHS2
WH(Half bin)
W5, W6, W7, W8, W9, WA, WB, WC
SPMWH◆541MD5WAWHS3
SPMWH◆541MD5WAWMS1
SPMWH◆541MD5WAWMS2 WM(Quarter bin)
W6, W7, WA, WB
SPMWH◆541MD5WAWMS3
SPMWH◆541MD5WAV0S1
SPMWH◆541MD5WAV0S2
V0(Whole bin)
SPMWH◆541MD5WAV0S3
V1, V2, V3, V4, V5, V6, V7, V8,
V9, VA, VB, VC, VD, VE, VF, VG
SPMWH◆541MD5WAVHS1
3000K
SPMWH◆541MD5WAVHS2
VH(Half bin)
V5, V6, V7, V8, V9, VA, VB, VC
SPMWH◆541MD5WAVHS3
SPMWH◆541MD5WAVMS1
SPMWH◆541MD5WAVMS2 VM(Quarter bin)
V6, V7, VA, VB
SPMWH◆541MD5WAVMS3
SPMWH◆541MD5WAU0S1
SPMWH◆541MD5WAU0S2
U0(Whole bin)
SPMWH◆541MD5WAU0S3
U1, U2, U3, U4, U5, U6, U7, U8,
U9, UA, UB, UC, UD, UE, UF, UG
SPMWH◆541MD5WAUHS1
3500K
SPMWH◆541MD5WAUHS2
UH(Half bin)
U5, U6, U7, U8, U9, UA, UB, UC
SPMWH◆541MD5WAUHS3
SPMWH◆541MD5WAUMS1
SPMWH◆541MD5WAUMS2 UM(Quarter bin)
U6, U7, UA, UB
SPMWH◆541MD5WAUMS3
http://www.samsungled.com
4 / 48
1) Color Binning (Continued)
Nominal
CCT
Product Code
Color Rank
SPMWH◆541MD5WAT0S1
SPMWH◆541MD5WAT0S2
T0(Whole bin)
SPMWH◆541MD5WAT0S3
Chromaticity Bins
T1, T2, T3, T4, T5, T6, T7, T8,
T9, TA, TB, TC, TD, TE, TF, TG
SPMWH◆541MD5WATHS1
4000K
SPMWH◆541MD5WATHS2
TH(Half bin)
T5, T6, T7, T8, T9, TA, TB, TC
TM(Quarter bin)
T6, T7, TA, TB
SPMWH◆541MD5WATHS3
SPMWH◆541MD5WATMS1
SPMWH◆541MD5WATMS2
SPMWH◆541MD5WATMS3
SPMWH◆541MD5WAR0S1
SPMWH◆541MD5WAR0S2
R0(Whole bin)
SPMWH◆541MD5WAR0S3
R1, R2, R3, R4, R5
R6, R7, R8, R9 ,RA
5000K
SPMWH◆541MD5WARMS1
SPMWH◆541MD5WARMS2 RM(Quarter bin)
R1, R2, R3, R4, R5, R6
SPMWH◆541MD5WARMS3
SPMWH◆541MD5WAQ0S1
SPMWH◆541MD5WAQ0S2
Q0(Whole bin)
SPMWH◆541MD5WAQ0S3
Q1, Q2, Q3, Q4, Q5
Q6, Q7, Q8, Q9, QA
5700K
SPMWH◆541MD5WAQMS1
SPMWH◆541MD5WAQMS2 QM(Quarter bin)
Q1, Q2, Q3, Q4, Q5, Q6
SPMWH◆541MD5WAQMS3
SPMWH◆541MD5WAP0S1
SPMWH◆541MD5WAP0S2
P0(Whole bin)
SPMWH◆541MD5WAP0S3
P1, P2, P3, P4, P5
P6, P7, P8, P9, PA
6500K
SPMWH◆541MD5WAPMS1
SPMWH◆541MD5WAPMS2 PM(Quarter bin)
P1, P2, P3, P4, P5, P6
SPMWH◆541MD5WAPMS3
http://www.samsungled.com
5 / 48
2) Chromaticity Region & Coordinates
http://www.samsungled.com
6 / 48
2) Chromaticity Region & Coordinates (Continued)
Region
CIE X
CIE Y
Region
CIE X
CIE Y
Region CIE X
W rank (2700K)
W1
W2
W3
W4
W5
W6
W7
W8
0.4373
0.3893
0.4418
0.3981
0.4475
CIE Y Region CIE X
CIE Y
V rank (3000K)
0.4465
0.4071
0.4513
0.4164
0.3994
0.4573
0.4178
0.4242 0.3919
0.4322 0.4096
0.4428
0.3906
0.4523
0.4085
0.4203 0.3833
0.4281 0.4006
0.4428
0.3906
0.4523
0.4085
0.4203 0.3833
0.4281 0.4006
0.4475
0.3994
0.4573
0.4178
0.4532
0.4008
0.4634
0.4193
0.4300 0.3939
0.4385 0.4119
0.4483
0.3919
0.4582
0.4099
0.4259 0.3853
0.4342 0.4028
0.4483
0.3919
0.4582
0.4099
0.4259 0.3853
0.4342 0.4028
0.4532
0.4008
0.4634
0.4193
0.4589
0.4021
0.4695
0.4207
0.4359 0.3960
0.4449 0.4141
0.4538
0.3931
0.4641
0.4112
0.4316 0.3873
0.4403 0.4049
0.4538
0.3931
0.4641
0.4112
0.4316 0.3873
0.4403 0.4049
0.4589
0.4021
0.4695
0.4207
0.4646
0.4034
0.4756
0.4221
0.4418 0.3981
0.4513 0.4164
0.4593
0.3944
0.4700
0.4126
0.4373 0.3893
0.4465 0.4071
0.4418
0.3981
0.4513
0.4164
0.4183 0.3898
0.4259 0.4073
0.4465
0.4071
0.4562
0.4260
0.4523
0.4085
0.4624
0.4274
0.4281 0.4006
0.4364 0.4188
0.4475
0.3994
0.4573
0.4178
0.4242 0.3919
0.4322 0.4096
0.4475
0.3994
0.4573
0.4178
0.4242 0.3919
0.4322 0.4096
0.4523
0.4085
0.4624
0.4274
0.4582
0.4099
0.4687
0.4289
0.4342 0.4028
0.4430 0.4212
0.4532
0.4008
0.4634
0.4193
0.4300 0.3939
0.4385 0.4119
0.4532
0.4008
0.4634
0.4193
0.4300 0.3939
0.4385 0.4119
0.4582
0.4099
0.4687
0.4289
0.4641
0.4112
0.4750
0.4304
0.4403 0.4049
0.4496 0.4236
0.4589
0.4021
0.4695
0.4207
0.4359 0.3960
0.4449 0.4141
0.4589
0.4021
0.4695
0.4207
0.4359 0.3960
0.4449 0.4141
0.4641
0.4112
0.4750
0.4304
0.4700
0.4126
0.4813
0.4319
0.4465 0.4071
0.4562 0.4260
0.4646
0.4034
0.4756
0.4221
0.4418 0.3981
0.4513 0.4164
http://www.samsungled.com
W9
WA
WB
WC
WD
WE
WF
WG
0.4147 0.3814
V1
V2
V3
V4
V5
V6
V7
V8
0.4183 0.3898
0.4242 0.3919
0.4300 0.3939
0.4359 0.3960
0.4221 0.3984
0.4281 0.4006
0.4342 0.4028
0.4403 0.4049
0.4221 0.3984
V9
VA
VB
VC
VD
VE
VF
VG
0.4259 0.4073
0.4322 0.4096
0.4385 0.4119
0.4449 0.4141
0.4299 0.4165
0.4364 0.4188
0.4430 0.4212
0.4496 0.4236
7 / 48
2) Chromaticity Region & Coordinates (Continued)
Region
CIE X
CIE Y
Region
CIE X
CIE Y
Region CIE X
U rank (3500K)
U1
U2
U3
U4
U5
U6
U7
U8
0.3889
0.3690
0.3915
0.3768
0.3981
CIE Y Region CIE X
CIE Y
T rank (4000K)
0.3941
0.3848
0.3968
0.3930
0.3800
0.4040
0.3966
0.3744 0.3685
0.3782 0.3837
0.3953
0.3720
0.4010
0.3882
0.3686 0.3649
0.3719 0.3797
0.3953
0.3720
0.4010
0.3882
0.3726 0.3612
0.3763 0.3760
0.3981
0.3800
0.4040
0.3966
0.4048
0.3832
0.4113
0.4001
0.3804 0.3721
0.3847 0.3877
0.4017
0.3751
0.4080
0.3916
0.3744 0.3685
0.3782 0.3837
0.4017
0.3751
0.4080
0.3916
0.3783 0.3646
0.3825 0.3798
0.4048
0.3832
0.4113
0.4001
0.4116
0.3865
0.4186
0.4037
0.3863 0.3758
0.3912 0.3917
0.4082
0.3782
0.4150
0.3950
0.3804 0.3721
0.3847 0.3877
0.4082
0.3782
0.4150
0.3950
0.384
0.3887 0.3837
0.4116
0.3865
0.4186
0.4037
0.4183
0.3898
0.4259
0.4073
0.3924 0.3794
0.3978 0.3958
0.4147
0.3814
0.4221
0.3984
0.3863 0.3758
0.3912 0.3917
0.3915
0.3768
0.3968
0.3930
0.3686 0.3649
0.3719 0.3797
0.3941
0.3848
0.3996
0.4015
0.4010
0.3882
0.4071
0.4052
0.3763
0.376
0.3802 0.3916
0.3981
0.3800
0.4040
0.3966
0.3702 0.3722
0.3736 0.3874
0.3981
0.3800
0.4040
0.3966
0.3744 0.3685
0.3782 0.3837
0.4010
0.3882
0.4071
0.4052
0.4080
0.3916
0.4146
0.4089
0.3825 0.3798
0.3869 0.3958
0.4048
0.3832
0.4113
0.4001
0.3763
0.376
0.3802 0.3916
0.4048
0.3832
0.4113
0.4001
0.3804 0.3721
0.3847 0.3877
0.4080
0.3916
0.4146
0.4089
0.4150
0.3950
0.4222
0.4127
0.3887 0.3836
0.3937 0.4001
0.4116
0.3865
0.4186
0.4037
0.3825 0.3798
0.3869 0.3958
0.4116
0.3865
0.4186
0.4037
0.3863 0.3758
0.3912 0.3917
0.4150
0.3950
0.4222
0.4127
0.4221
0.3984
0.4299
0.4165
0.395
0.3875
0.4006 0.4044
0.4183
0.3898
0.4259
0.4073
0.3887 0.3836
0.3937 0.4001
http://www.samsungled.com
U9
UA
UB
UC
UD
UE
UF
UG
0.367
T1
T2
T3
T4
T5
T6
T7
T8
0.3578
0.3726 0.3612
0.3783 0.3646
0.3840 0.3681
0.3702 0.3722
T9
TA
TB
0.3681
0.3898 0.3716
0.3744 0.3685
0.3804 0.3721
0.3863 0.3758
0.3924 0.3794
TC
TD
TE
TF
TG
0.3763
0.376
0.3825 0.3798
0.3887 0.3836
0.395
0.3875
0.3782 0.3837
0.3847 0.3877
0.3912 0.3917
0.3978 0.3958
8 / 48
2) Chromaticity Region & Coordinates (Continued)
Region
CIE X
CIE Y
Region
CIE X
CIE Y
Region
R rank (5000K)
R1
R2
R3
R4
R5
0.3366
0.3369
0.3441
0.3428
0.3449
0.3515
0.3369
0.3451
0.3441
0.3428
0.3515
0.3487
0.3527
0.3578
0.3449
CIE X
CIE Y Region
CIE X
CIE Y
P rank (6500K)
0.3456
0.3601
0.3539
0.3669
0.3551
0.3760
0.3464
0.3688
0.3055 0.3177
0.3117 0.3393
0.3363
0.3287
0.3145 0.3187
0.3081 0.3049
0.3433
0.3341
0.3441
0.3428
0.3515
0.3366
0.3369
0.3135 0.3256
0.3068 0.3113
0.3369
0.3451
0.3433
0.3341
0.3055 0.3177
0.3154 0.3119
0.3449
0.3515
0.3503
0.3396
0.3456
0.3601
0.3515
0.3487
0.3373
0.3534
0.3441
0.3428
0.3041 0.3240
0.3145 0.3187
0.3449
0.3515
0.3376
0.3616
0.3135 0.3256
0.3028 0.3304
0.3527
0.3578
0.3464
0.3688
0.3539
0.3669
0.3471
0.3775
0.3456
0.3601
0.3379
0.3698
0.3126 0.3324
0.3015 0.3368
0.3373
0.3534
0.3464
0.3688
0.3041 0.3240
0.3117 0.3393
0.3456
0.3601
0.3551
0.3760
0.3126 0.3324
0.3464
0.3688
0.3564
0.3851
0.3376
0.3616
0.3471
0.3775
R6
R7
R8
R9
RA
0.3068 0.3113
P1
P2
P3
P4
P5
0.3145 0.3187
0.3135 0.3256
0.3221 0.3261
0.3216 0.3334
0.3135 0.3256
0.3126 0.3324
0.3216 0.3334
0.3210 0.3408
0.3117 0.3393
0.3028 0.3304
0.3126 0.3324
P6
P7
P8
P9
PA
0.3210 0.3408
0.3205 0.3481
0.3154 0.3119
0.3145 0.3187
0.3226 0.3188
0.3221 0.3261
0.3117 0.3393
0.3107 0.3461
0.3205 0.3481
0.3200 0.3554
0.3107 0.3461
Q rank (5700K)
Q1
Q2
Q3
Q4
Q5
0.3222
0.3243
0.3292
0.3461
0.3294
0.3306
0.3293
0.3384
0.3373
0.3534
0.3376
0.3616
0.3217
0.3316
0.3292
0.3539
0.3294
0.3306
0.3227
0.3170
0.3366
0.3369
0.3295
0.3228
0.3369
0.3451
0.3294
0.3306
0.3293
0.3384
0.3222
0.3243
0.3217
0.3316
0.3295
0.3228
0.3293
0.3384
0.3363
0.3287
0.3292
0.3461
0.3366
0.3369
0.3212
0.3389
0.3294
0.3306
0.3293
0.3384
0.3207
0.3462
0.3369
0.3451
0.3292
0.3539
0.3373
0.3534
0.3291
0.3617
0.3292
0.3461
0.3202
0.3535
0.3212
0.3389
0.3292
0.3539
0.3292
0.3461
0.3376
0.3616
0.3292
0.3539
0.3379
0.3698
0.3207
0.3462
0.3291
0.3617
Q6
Q7
Q8
Q9
QA
Notes: SAMSUNG ELECTRONICS maintains ±0.005 tolerance of Cx, Cy
http://www.samsungled.com
9 / 48
2. Characteristics
1) Absolute Maximum Rating
Item
Operating temperature range
Symbol
Top
Rating
-40℃ ~ +85℃
Condition
-
Storage temperature range
Tstg
-40℃ ~ +120℃
-
LED junction temperature
TJ
110℃
-
Forward Current
IF
180 mA
-
Peak Pulsed Forward Current
IFP
300 mA
Duty 1/10 pulse width 10ms
Assembly Process Temperature
-
260℃, < 10sec
-
ESD
-
5kV
HBM
2) Electro-optical Characteristics
Item
Forward Voltage1) (VF)
(@65 mA, Ts = 25℃)
Unit
V
Nominal
CCT
-
2700K
(W☆)
3000K
(V☆)
3500K
(U☆)
Luminous Flux2) (Φv)
(@65 mA, Ts = 25℃)
lm
4000K
(T☆)
5000K
(R☆)
5700K
(Q☆)
6500K
(P☆)
Reverse Voltage
V
(@5 mA, Ts = 25℃)
Color Rendering Index3)(Ra) Special CRI4) (R9)
Thermal resistance (Rth, j-s) ℃/W
Product
Code
*WAW☆S1
*WAW☆S2
*WAW☆S3
*WAV☆S1
*WAV☆S2
*WAV☆S3
*WAU☆S1
*WAU☆S2
*WAU☆S3
*WAT☆S1
*WAT☆S2
*WAT☆S3
*WAR☆S1
*WAR☆S2
*WAR☆S3
*WAQ☆S1
*WAQ☆S2
*WAQ☆S3
*WAP☆S1
*WAP☆S2
*WAP☆S3
Rank
AZ
A1
WA A2
A3
A4
S1
S2
S3
S1
S2
S3
S1
S2
S3
S1
S2
S3
S1
S2
S3
S1
S2
S3
S1
S2
S3
Min
Typ
Max
2.70
2.80
2.90
3.00
3.10
24.0
26.0
28.0
24.5
26.5
28.5
25.0
27.0
29.0
26.0
28.0
30.0
27.0
29.0
31.0
26.5
28.5
30.5
26.0
28.0
30.0
-
2.80
2.90
3.00
3.10
3.20
26.0
28.0
30.0
26.5
28.5
30.5
27.0
29.0
31.0
28.0
30.0
32.0
29.0
31.0
33.0
28.5
30.5
32.5
28.0
30.0
32.0
-
-
-
0.7
-
1.2
-
-
5
-
80
0
-
16
-
Notes:
1)~4) SAMSUNG ELECTRONICS maintains a tolerance of VF:±0.1 V, Φv:±5 %, Ra :±3.0, R9 :±6.5 on
measurements
5) " * " is Product Code of "SPMWH◆541MD5"
http://www.samsungled.com
10 / 48
3. Typical Characteristics Graph
(Ts = 25℃)
1) Spectrum Distribution
[CCT : 2700K & 3000K]
[CCT : 3500K & 4000K]
http://www.samsungled.com
11 / 48
[CCT : 5000K & 5700K]
[CCT : 6500K]
http://www.samsungled.com
12 / 48
2) Forward Current Characteristics
[Relative Luminous Flux vs. Forward Current]
(Ts = 25℃)
[Forward Current vs. Forward Voltage]
(Ts = 25℃)
http://www.samsungled.com
13 / 48
3) Temperature Characteristics
[Relative Luminous Flux vs. Ts]
(IF = 65mA)
[Forward Voltage vs. Ts]
(IF = 65mA)
http://www.samsungled.com
14 / 48
4) Color shift Characteristics
[Color Δx, Δy vs. Forward Current]
[Color Δx, Δy vs. Ts]
http://www.samsungled.com
(Ts = 25℃)
(IF = 65mA)
15 / 48
5) Derating Curve
6) Beam Angle Characteristics
http://www.samsungled.com
16 / 48
4. Outline Drawing & Dimension
1. Tolerance is ±0.10 mm
2. The maximum compressing force is 15N on the body ⓐ
3. Do not place pressure on the encapsulation resin ⓑ
Top View
Left Side View
Anode Mark
ⓐ
Bottom View
ⓑ
Cathode
Anode
Front View
Ts
Recommended Land Pattern
Notes:
1) This LED has built-in ESD protection device(s) connected in parallel to LED Chip(s).
2) Ts point & measurement method
① Measure the nearest point to the thermal pad. If necessary, remove PSR of PCB to reach Ts
point.
② Thermal pad must be soldered to the PCB to dissipate heat properly. Otherwise, LED can be
damaged.
3) Precautions
① The pressure on the LEDs will influence to the reliability of the LEDs. Precautions should be
taken to avoid the strong pressure on the LEDs. Do not put stress on the LEDs during heating.
② Re-soldering should not be done after the LEDs have been soldered. If re-soldering is
unavoidable, LED`s characteristics should be carefully checked before and after such repair.
③ Do not stack assembled PCBs together. Since materials of LEDs is soft, abrasion between two
PCB assembled with LED might cause catastrophic failure of the LEDs.
http://www.samsungled.com
17 / 48
5. Reliability Test Items and Conditions
1) Test Items
Test Item
Test Conditions
Test
Hours/Cycles
Sample No
MSL Test
125 ℃ 24hrs drying → 60 ℃, 60 %RH 120hrs
→ 260 ℃ 10sec 3 cycles
1 cycle
11
Room Temperature
life test
25 ℃±3 ℃, DC180 ㎃
1,000 hrs
22
High Temperature
life test
85 ℃±3 ℃, DC180 ㎃
1,000 hrs
22
High Temperature
humidity life test
85 ℃±3 ℃, 85 %±2 %RH, DC180 ㎃
1,000 hrs
22
Low Temperature
life test
-40 ℃±3 ℃, DC180 ㎃
1,000 hrs
22
Powered Temperature
Cycle test
-45℃/20 min ↔ 85℃/20 min, Sweep
100min cycle on/off: each 5 min, DC 180mA
100 cycle
22
Thermal Shock
-45 ℃/15 min ↔ 125 ℃/15 min
→ Hot plate 180 ℃
500 cycle
100
High Temperature
Storage
Ta=120 ℃±3 ℃
1000 hrs
11
Low Temperature
Storage
Ta=-40 ℃±3 ℃
1000 hrs
11
ESD(HBM)
R1:10 ㏁,
R2:1.5 ㏀,
C:100 ㎊,
V = ±5 kV
5 times
5
ESD(MM)
R1:10 ㏁,
R2: 0,
C:200 ㎊,
V = ±0.5 kV
5 times
5
Vibration Test
20~2000~20 Hz 200 m/s2, Sweep 4 min
X, Y, Z 3 direction, each 1 cycle
4 cycles
11
Mechanical Shock Test
1500G, 0.5 ms
5 cycles
11
2) Criteria for Judging the Damage
Item
Symbol
Limit
Test Condition
Min
Max
Forward Voltage
VF
IF = 65 ㎃
Init. Value*0.9
Init. Value*1.1
Luminous Flux
Φv
IF = 65 ㎃
Init. Value*0.7
Init. Value*1.2
http://www.samsungled.com
18 / 48
6. Solder Conditions
1) Reflow Conditions ( Pb Free )
Reflow Frequency : 2 times max.
2) For Manual Soldering
Not more than 5 seconds @Max. 300℃, under soldering iron.
http://www.samsungled.com
19 / 48
7. Tape & Reel
1) Taping Dimension
(unit : mm)
Anode Mark (Cutting side)
Tapping Diretion
Start
End
More than 500㎜
Mounted with
More than 100~200㎜
Leading part more than
Unloaded tape
LED package
Unloaded tape
500㎜
http://www.samsungled.com
20 / 48
2-1) Reel Dimension (max 2,500 pcs)
2-2) Reel Dimension (max 10,000 pcs)
Symbol
A
B
C
W1
W2
Spec(mm)
Ø330±1
80±1
13±0.5
13±0.3
17.5±1
(1) Quantity : The quantity/Reel to be 2,500 pcs or 10,000 pcs, .
(2) Cumulative Tolerance : Cumulative tolerance/10 pitches to be ±0.2mm
(3) Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the
cover tape is turned off from the carrier tape at 10℃ angle to be the carrier tape.
(4) Packaging : P/N, Manufacturing data code no. and quantity to be indicated on a
damp proof Package.
http://www.samsungled.com
21 / 48
8. Label Structure
1) Label Structure
ⓐⓑⓒⓓⓔⓕ
A1★1S1
SPMWHT541MD5WA★0S1 A1★1S1 01
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
GLAW94001 / 1001 / 2,500 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
Rank Code
N.B) Denoted rank is the only example.
'★' means All kind of Chromaticity Coordinate Rank.
Rank Code
ⓐⓑ
: Forward Voltage(VF) Rank (refer to page. 11)
ⓒⓓ
: Chromaticity Coordinate Rank (refer to page. 4~10)
: Luminous Flux(Φv, lm) Rank (refer to page. 3)
ⓔⓕ
2) LOT Number
The Lot number is composed of the following characters
A1★1S1
SPMWHT541MD5WA★0S1 A1★1S1 01
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
GLAW94001 / 1001 / 2,500 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
①②③④⑤⑥⑦⑧⑨ / 1ⓐⓑⓒ / 2,500 PCS
①
: Production Site (S:SAMSUNG ELECTRONICS, G:TIAJIN CHINA)
②
: L (LED)
③
: Product State (A:Normality, B:Bulk, C:First Production, R:Reproduction, S:Sample)
④
: Year (Y:2014, Z:2015, A:2016...)
⑤
: Month (1 ~ 9, A, B, C)
⑥
: Day (1 ~ 9, A, B ~ V)
⑦⑧⑨
: SAMSUNG ELECTRONICS LED Product number (001 ~ 999)
ⓐⓑⓒ
: Reel Number (001 ~ 999)
http://www.samsungled.com
22 / 48
9. Packing Structure
1-1) Packing Process (The quantity of PKG on the Reel to be Max 2,500 pcs)
Reel
A1★1S1
SPMWHT541MD5WA★0S1 A1★1S1 01
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
GLAW94001 / 1001 / 2,500 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
LEVEL
2a
Aluminum Vinyl Bag
A1★1S1
SPMWHT541MD5WA★0S1 A1★1S1 01
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
GLAW94001 / 1001 / 2,500 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
Material : Paper(SW3B(B))
TYPE
SIZE(mm)
L
W
H
7inch 245±5 220±5 182±5
7inch 245±5 220±5 86±5
①
① SIDE
H
A1★1S1
CHIP LED
SPMWHT541MD5WA★0S1 A1★1S1 01
W
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
GLAW94001 / 1001 / 25,000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
http://www.samsungled.com
L
23 / 48
1-2) Packing Process (The quantity of PKG on the Reel to be Max 10,000 pcs)
Reel
A1★1S1
SPMWH1541MD5WA★0S1 A1★1S1 01
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
GLAV94001 / 1001 / 10,000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
LEVEL
2a
Aluminum Vinyl Bag
A1★1S1
SPMWH1541MD5WA★0S1 A1★1S1 01
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
GLAV94001 / 1001 / 10,000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
A1★1S1
SPMWH1541MD5WA★0S1 A1★1S1 01
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
GLAV94001 / 1001 / 150,000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
[Box Label]
Box
Inner
SIZE(mm)
L
W
340±5 370±5
H
80±5
Outer 345±5 378±5 405±5
http://www.samsungled.com
24 / 48
2) Aluminum Packing Bag
A1★1S1
SPMWHT541MD5WA★0S1 A1★1S1 01
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
GLAW94001 / 1001 / 2,500 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
Silica gel & Humidity Indicator Card in Aluminum Vinyl Bag
http://www.samsungled.com
25 / 48
10. Precaution for use
1) For over-current-proof function, customers are recommended to apply resistors to
prevent sudden change of the current caused by slight shift of the voltage.
과전류 방지를 위해 전압의 미세한 이동에 의해 야기되는 전류의 순간 변화를 방지하기
위해 저항 등의 설치를 권장함.
2) This device should not be used in any type of fluid such as water, oil, organic
solvent, etc. When washing is required, IPA is recommended to use.
제품은 물, 오일, 유기물과 같은 액체 타입에서의 사용은 제한되며,
세정이 필요할 시에는 IPA 사용을 권장함.
3) When the LEDs illuminate, operating current should be decided after considering the
ambient maximum temperature.
LED의 발광 시, 동작 전류는 주변 최고온도를 고려하여 결정되어야 함.
4) LEDs must be stored in a clean environment.
If the LEDs are to be stored for 3 months or more after being shipped from
Samsung Electronics, they should be packed by a sealed container with nitrogen gas
injected.(Shelf life of sealed bags: 12 months, temp. ~40℃, ~90%RH)
LED의 보관은 청정한 환경에서 보존되어져야 하며, 만약 삼성전자로부터 공급받는 후
3개월 또는 그 이상 보관이 필요하다면 질소 가스를 동봉한 보존용기에 보관되어야 함.
(보존 bag의 수명 : 12 개월, 보존 온도 ~40℃, 습도 ~90%RH)
5) After storage bag is open, device subjected to soldering, solder reflow, or other
high temperature processes must be:
보존 Bag이 개봉된 후에, 납땜이나 reflow등의 높은 온도에 노출되는 제품은 다음의
사항에 부합되어야 함.
a. Mounted within 672 hours(28 days) at an assembly line with a condition of no
more than 30℃/60%RH,
a. 제품은 30℃/60%RH보다 같거나 낮은 조립조건에서 672시간(28일)이내에 조립해야 함.
b. Stored at <10%RH.
b. 10% 이하의 상대습도에서 보관되어야 함.
6) Repack unused Products with anti-moisture packing, fold to close any opening and
then store in a dry place.
사용하지 않은 제품은 방습팩에 넣어 개봉 부위를 닫아서 다시 포장한 후,
건조한 장소에서 보관할 것을 권장함.
http://www.samsungled.com
26 / 48
7) Devices require baking before mounting, if humidity card reading is >60% at 23±5℃.
만약 습도표시카드의 수치가 23±5℃에서 60% 이상이라면, 제품 실장 전 baking해야 함.
8) Devices must be baked for 1 hour at 60±5℃, if baking is required.
만약 baking이 필요하다면, 제품은 60±5℃에서 1시간 정도 baking 되어야 함.
9) The LEDs are sensitive to the static electricity and surge. It is recommended to
use a wrist band or anti-electrostatic glove when handling the LEDs.
LED는 정전기 및 서지에 민감한 제품이므로, LED 제품을 다룰 시에는 정전기
방지장갑이나 손목밴드를 사용하기를 권장함.
If voltage exceeding the absolute maximum rating is applied to LEDs, it may cause
damage or even destruction to LED devices.
만약 절대 허용치를 초과하는 전압이 LED에 가해지면, LED 소자는 파괴되거나
손상될 수 있음.
Damaged LEDs may show some unusual characteristics such as increase in leak
current, lowered turn-on voltage, or abnormal lighting of LEDs at low current.
손상된 제품은 누설전류의 증가, Turn on 전압의 저하, 저 전류에서의 점등불량 등의
이상 거동을 보일 수 있음.
10) VOCs (volatile organic compounds) can be generated from adhesives, flux, hardener
or organic additives used in luminaires (fixtures).
Transparent LED silicone encapsulant is permeable to those chemicals and
they may lead a discoloration of encapsualnt when they expose to heat or light.
VOCs(휘발성 유기 화합물)는 등기구에 사용되는 접착제, Flux, 경화제,
유기물 첨가제에서 발생하여 LED 실리콘 봉지제를 투과하고,
빛 또는 열에 노출되었을 때 변색이 발생 할 수 있음.
This phenomenon can cause a significant loss of light emitted(output) from the
luminaires(fixtures).
이러한 현상은 등기구로부터 나오는 빛의 중대한 손실을 줄 수 있음.
In order to prevent these problems, we recommend you to know the physical
properties of the materials used in luminaires, They must be selected carefully.
이러한 문제 발생 방지를 위해서, 등기구에 사용되는 자재에 대한 물성을 알고
주의하여 선택 되어야함.
http://www.samsungled.com
27 / 48
11) Risk of Sulfurization (or Tarnishing)
The LED from Samsung Electronics uses a silver-plated lead frame and
its surface color may change to black(or dark colored) when it is exposed to sulfur(S),
chlorine (Cl) or other halogen compound.
삼성전자의 LED는 Ag(은)을 도금한 리드프레임을 사용함. 이 리드프레임의 표면이
황(S), 염소(Cl), 또는 다른 할로겐 화합물들에 노출시 Ag(은)은 검정(또는 어두운색)으로
바뀔 수 있음.
Sulfurization of lead frame may cause intensity degradation, change of
chromaticity coordinates and, in extreme cases, open circuit. It requires caution.
리드 프레임의 황화(Sulfurization)는 광량 저하, 색좌표 변화 및
심한 경우 LED 무등(Open) 불량을 일으킬 수도 있으니 주의가 필요함.
Due to possible sulfurization of lead frame, LED should not be used and
stored together with oxidizing substances made of materials in a following list,
: Rubber, plain paper, lead solder cream and so on.
리드 프레임 황화(Sulfurization)의 근원이 될 수 있으니 LED는 아래의 목록으로
만들어진 산화성 물질들과 함께 저장, 사용이 불가함 : 고무, 일반 종이, 납땜 크림 등
http://www.samsungled.com
28 / 48
12. Hazard Substance Analysis
1) SVHC (Reach) Report
http://www.samsungled.com
29 / 48
http://www.samsungled.com
30 / 48
http://www.samsungled.com
31 / 48
http://www.samsungled.com
32 / 48
http://www.samsungled.com
33 / 48
http://www.samsungled.com
34 / 48
http://www.samsungled.com
35 / 48
http://www.samsungled.com
36 / 48
http://www.samsungled.com
37 / 48
http://www.samsungled.com
38 / 48
http://www.samsungled.com
39 / 48
http://www.samsungled.com
40 / 48
http://www.samsungled.com
41 / 48
http://www.samsungled.com
42 / 48
http://www.samsungled.com
43 / 48
http://www.samsungled.com
44 / 48
http://www.samsungled.com
45 / 48
http://www.samsungled.com
46 / 48
http://www.samsungled.com
47 / 48
Revision History
Date
No.
Revision History
2013.02.08
1.0
2013.03.06
2.0
2013.03.25
3.0
2013.05.14
4.0
Writer
Drawn
Approved
New version.
W.H Jung
Y.T KIM
Add up Quarter and half of color binning.
W.H Jung
Y.T KIM
C.H. KWON
Y.T KIM
W.H Jung
Y.T KIM
W.H Jung
Y.T KIM
1) Change of tapping Q'ty from
2,000 pcs to 2,500 pcs.
2) Change of CIE tolerance x,y:±0.005
Add up a mark of UL certification.
2013.06.25
5.0
1) Add up ErP(Energy-related Products) of
the Energy regulation.
2) Change of Graph on Color shift
Characteristics
2013.11.09
6.0
1) Deletes ErP(Energy-related Products)
codes in the product data sheet.
W.H Jung
S.B Yun
2014.01.23
7.0
1) Update of SGS data.
2) Deletes UL mark of the label on the reel.
3) Add up a Small box
W.H Jung
S.B Yun
2015.02.03
8.0
Maximum Current upgade(150→180mA)
Y.J Cho
J.K Park
http://www.samsungled.com
48 / 48
Similar pages