Rev: 001 Product Family Data Sheet LM231B - 2323 Middle Power LED Introduction Features Package : Silicone Reflector LED Package Beam Angle: 120˚ Precondition : JEDEC Level 2a Dimension : 2.3 x 2.3 x 0.7 mm ESD withstand Voltage : up to ± 5KV [HBM] Reliability Test : LM-80 qualified Applications INDOOR LIGHTING : Ambient Light, LED tube, Down light, LED bulb and Ceiling Light SAMSUNG ELECTRONICS 95, Samsung2-Ro, Giheung-Gu, Yongin-City, Gyeonggi-Do 446-711, KOREA http://www.samsungled.com 1 / 49 Contents 1. Product Code Information ----------------------- 2. Luminous Flux Characteristics ----------------------- 10 3. Characteristics ----------------------- 12 4. Typical Characteristics Graph ----------------------- 13 5. Outline Drawing & Dimension ----------------------- 19 6. Reliability Test Items & Conditions ----------------------- 20 7. Solder Conditions ----------------------- 21 8. Tape & Reel ----------------------- 22 9. Label Structure ----------------------- 23 10. Packing Structure ----------------------- 24 11. Precaution For Use ----------------------- 26 12. Hazard Substance Analysis Report ----------------------- 29 http://www.samsungled.com 3 2 / 49 1. Product Code Information 1) Luminous Flux Bins (Ts = 25℃) Sorting Condition lm @65mA Nominal CCT Product Code Flux Rank Intensity Range (cd) Flux Bin Flux Range (Φv, lm) 6.24 ~ 7.06 SY 19.00 ~ 21.50 7.06 ~ 7.88 2700K SPMWHT223MD5WAW0S0 S0 SZ 21.50 ~ 24.00 7.88 ~ 8.53 S1 24.00 ~ 26.00 6.40 ~ 7.22 SY 19.50 ~ 22.00 7.22 ~ 8.04 3000K SPMWHT223MD5WAV0S0 S0 SZ 22.00 ~ 24.50 8.04 ~ 8.70 S1 24.50 ~ 26.50 6.56 ~ 7.38 SY 20.00 ~ 22.50 7.38 ~ 8.20 3500K SPMWHT223MD5WAU0S0 S0 SZ 22.50 ~ 25.00 8.20 ~ 8.86 S1 25.00 ~ 27.00 6.89 ~ 7.71 SY 21.00 ~ 23.50 7.71 ~ 8.53 4000K SPMWHT223MD5WAT0S0 S0 SZ 23.50 ~ 26.00 8.53 ~ 9.19 S1 26.00 ~ 28.00 Notes: SAMSUNG ELECTRONICS maintains a tolerance of ±5% on Luminous Flux measurements http://www.samsungled.com 3 / 49 1) Luminous Flux Bins (Continued) Sorting Condition lm @65mA Nominal CCT Product Code Flux Rank Intensity Range (cd) Flux Bin Flux Range (Φv, lm) 7.22 ~ 8.04 SY 22.00 ~ 24.50 8.04 ~ 8.86 5000K SPMWHT223MD5WAR0S0 S0 SZ 24.50 ~ 27.00 8.86 ~ 9.52 S1 27.00 ~ 29.00 7.06 ~ 7.88 SY 21.50 ~ 24.00 7.88 ~ 8.70 5700K SPMWHT223MD5WAQ0S0 S0 SZ 24.00 ~ 26.50 8.70 ~ 9.35 S1 26.50 ~ 28.50 6.89 ~ 7.71 SY 21.00 ~ 23.50 7.71 ~ 8.53 6500K SPMWHT223MD5WAP0S0 S0 SZ 23.50 ~ 26.00 8.53 ~ 9.19 S1 26.00 ~ 28.00 Notes: SAMSUNG ELECTRONICS maintains a tolerance of ±5% on Luminous Flux measurements http://www.samsungled.com 4 / 49 2) Color Bins (Ts = 25℃) 1) Color Binning Nominal Product Code Color Rank 2700K SPMWHT223MD5WAW0S0 W0(Whole bin) 3000K SPMWHT223MD5WAV0S0 V0(Whole bin) 3500K SPMWHT223MD5WAU0S0 U0(Whole bin) 4000K SPMWHT223MD5WAT0S0 T0(Whole bin) 5000K SPMWHT223MD5WAR0S0 R0(Whole bin) R1, R2, R3, R4, R5, R6, R7, R8 5700K SPMWHT223MD5WAQ0S0 Q0(Whole bin) Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 6500K SPMWHT223MD5WAP0S0 P0(Whole bin) P1, P2, P3, P4, P5, P6, P7, P8 CCT http://www.samsungled.com Chromaticity Bins W1, W2, W3, W4, W5, W6, W7, W8, W9, WA, WB, WC, WD, WE, WF, WG V1, V2, V3, V4, V5, V6, V7, V8, V9, VA, VB, VC, VD, VE, VF, VG U1, U2, U3, U4, U5, U6, U7, U8, U9, UA, UB, UC, UD, UE, UF, UG T1, T2, T3, T4, T5, T6, T7, T8, T9, TA, TB, TC, TD, TE, TF, TG 5 / 49 2) Chromaticity Region & Coordinates http://www.samsungled.com 6 / 49 2) Chromaticity Region & Coordinates (Continued) Region CIE X CIE Y Region CIE X CIE Y Region CIE X CIE Y Region CIE X CIE Y W rank (2700K) V rank (3000K) 0.4373 0.3893 W1 W2 W3 W4 W5 W6 W7 W8 0.4418 0.3981 0.4475 0.3994 0.4465 0.4071 W9 0.4513 0.4164 0.4573 0.4178 0.4147 0.3814 V1 0.4183 0.3898 0.4242 0.3919 0.4221 0.3984 V9 0.4259 0.4073 0.4322 0.4096 0.4428 0.3906 0.4523 0.4085 0.4203 0.3833 0.4281 0.4006 0.4428 0.3906 0.4523 0.4085 0.4203 0.3833 0.4281 0.4006 0.4475 0.3994 0.4532 0.4008 WA 0.4573 0.4178 0.4634 0.4193 V2 0.4242 0.3919 0.4300 0.3939 VA 0.4322 0.4096 0.4385 0.4119 0.4483 0.3919 0.4582 0.4099 0.4259 0.3853 0.4342 0.4028 0.4483 0.3919 0.4582 0.4099 0.4259 0.3853 0.4342 0.4028 0.4532 0.4008 0.4589 0.4021 WB 0.4634 0.4193 0.4695 0.4207 V3 0.4300 0.3939 0.4359 0.3960 VB 0.4385 0.4119 0.4449 0.4141 0.4538 0.3931 0.4641 0.4112 0.4316 0.3873 0.4403 0.4049 0.4538 0.3931 0.4641 0.4112 0.4316 0.3873 0.4403 0.4049 0.4589 0.4021 0.4646 0.4034 WC 0.4695 0.4207 0.4756 0.4221 V4 0.4359 0.3960 0.4418 0.3981 VC 0.4449 0.4141 0.4513 0.4164 0.4593 0.3944 0.4700 0.4126 0.4373 0.3893 0.4465 0.4071 0.4418 0.3981 0.4513 0.4164 0.4183 0.3898 0.4259 0.4073 0.4465 0.4071 0.4523 0.4085 WD 0.4562 0.4260 0.4624 0.4274 V5 0.4221 0.3984 0.4281 0.4006 VD 0.4299 0.4165 0.4364 0.4188 0.4475 0.3994 0.4573 0.4178 0.4242 0.3919 0.4322 0.4096 0.4475 0.3994 0.4573 0.4178 0.4242 0.3919 0.4322 0.4096 0.4523 0.4085 0.4582 0.4099 WE 0.4624 0.4274 0.4687 0.4289 V6 0.4281 0.4006 0.4342 0.4028 VE 0.4364 0.4188 0.4430 0.4212 0.4532 0.4008 0.4634 0.4193 0.4300 0.3939 0.4385 0.4119 0.4532 0.4008 0.4634 0.4193 0.4300 0.3939 0.4385 0.4119 0.4582 0.4099 0.4641 0.4112 WF 0.4687 0.4289 0.4750 0.4304 V7 0.4342 0.4028 0.4403 0.4049 VF 0.4430 0.4212 0.4496 0.4236 0.4589 0.4021 0.4695 0.4207 0.4359 0.3960 0.4449 0.4141 0.4589 0.4021 0.4695 0.4207 0.4359 0.3960 0.4449 0.4141 0.4641 0.4112 0.4700 0.4126 0.4646 0.4034 http://www.samsungled.com WG 0.4750 0.4304 0.4813 0.4319 0.4756 0.4221 V8 0.4403 0.4049 0.4465 0.4071 0.4418 0.3981 VG 0.4496 0.4236 0.4562 0.4260 0.4513 0.4164 7 / 49 2) Chromaticity Region & Coordinates (Continued) Region CIE X CIE Y Region CIE X CIE Y Region CIE X CIE Y Region CIE X CIE Y U rank (3500K) T rank (4000K) 0.3889 0.3690 U1 U2 U3 U4 U5 U6 U7 U8 0.3915 0.3768 0.3981 0.3800 0.3941 0.3848 U9 0.3968 0.3930 0.4040 0.3966 0.367 0.3578 T1 0.3726 0.3612 0.3744 0.3685 0.3702 0.3722 T9 0.3763 0.376 0.3782 0.3837 0.3953 0.3720 0.4010 0.3882 0.3686 0.3649 0.3719 0.3797 0.3953 0.3720 0.4010 0.3882 0.3726 0.3612 0.3763 0.3760 0.3981 0.3800 0.4048 0.3832 UA 0.4040 0.3966 0.4113 0.4001 T2 0.3783 0.3646 0.3804 0.3721 TA 0.3825 0.3798 0.3847 0.3877 0.4017 0.3751 0.4080 0.3916 0.3744 0.3685 0.3782 0.3837 0.4017 0.3751 0.4080 0.3916 0.3783 0.3646 0.3825 0.3798 0.4048 0.3832 0.4116 0.3865 UB 0.4113 0.4001 0.4186 0.4037 T3 0.3840 0.3681 0.3863 0.3758 TB 0.3887 0.3836 0.3912 0.3917 0.4082 0.3782 0.4150 0.3950 0.3804 0.3721 0.3847 0.3877 0.4082 0.3782 0.4150 0.3950 0.384 0.3681 0.3887 0.3837 0.4116 0.3865 0.4183 0.3898 UC 0.4186 0.4037 0.4259 0.4073 T4 0.3898 0.3716 0.3924 0.3794 TC 0.395 0.3875 0.3978 0.3958 0.4147 0.3814 0.4221 0.3984 0.3863 0.3758 0.3912 0.3917 0.3915 0.3768 0.3968 0.3930 0.3686 0.3649 0.3719 0.3797 0.3941 0.3848 0.4010 0.3882 UD 0.3996 0.4015 0.4071 0.4052 T5 0.3744 0.3685 0.3763 0.376 TD 0.3782 0.3837 0.3802 0.3916 0.3981 0.3800 0.4040 0.3966 0.3702 0.3722 0.3736 0.3874 0.3981 0.3800 0.4040 0.3966 0.3744 0.3685 0.3782 0.3837 0.4010 0.3882 0.4080 0.3916 UE 0.4071 0.4052 0.4146 0.4089 T6 0.3804 0.3721 0.3825 0.3798 TE 0.3847 0.3877 0.3869 0.3958 0.4048 0.3832 0.4113 0.4001 0.3763 0.376 0.3802 0.3916 0.4048 0.3832 0.4113 0.4001 0.3804 0.3721 0.3847 0.3877 0.4080 0.3916 0.4150 0.3950 UF 0.4146 0.4089 0.4222 0.4127 T7 0.3863 0.3758 0.3887 0.3836 TF 0.3912 0.3917 0.3937 0.4001 0.4116 0.3865 0.4186 0.4037 0.3825 0.3798 0.3869 0.3958 0.4116 0.3865 0.4186 0.4037 0.3863 0.3758 0.3912 0.3917 0.4150 0.3950 0.4221 0.3984 0.4183 0.3898 http://www.samsungled.com UG 0.4222 0.4127 0.4299 0.4165 0.4259 0.4073 T8 0.3924 0.3794 0.395 0.3875 0.3887 0.3836 TG 0.3978 0.3958 0.4006 0.4044 0.3937 0.4001 8 / 49 2) Chromaticity Region & Coordinates (Continued) Region CIE X CIE Y Region CIE X CIE Y Region R rank (5000K) R1 R2 R3 R4 R5 0.3366 0.3369 0.3441 0.3428 0.3449 0.3515 0.3369 0.3601 0.3539 0.3669 0.3551 0.3760 0.3451 0.3464 0.3688 0.3441 0.3428 0.3363 0.3287 0.3515 0.3487 0.3433 0.3341 0.3527 0.3578 0.3441 0.3428 0.3449 0.3515 0.3366 0.3369 0.3369 0.3451 0.3433 0.3341 0.3449 0.3515 0.3503 0.3396 0.3456 0.3601 0.3515 0.3487 0.3373 0.3534 0.3441 0.3428 0.3449 0.3515 0.3376 0.3527 0.3578 0.3464 0.3539 0.3669 0.3471 0.3775 0.3456 0.3601 0.3379 0.3698 0.3373 0.3534 0.3464 0.3456 0.3601 0.3551 0.3464 0.3688 0.3564 0.3851 0.3376 0.3616 0.3471 0.3775 R7 R8 R9 RA CIE Y Region CIE X CIE Y P rank (6500K) 0.3456 R6 CIE X 0.3068 0.3113 0.3126 0.3324 0.3210 0.3408 0.3205 0.3481 0.3055 0.3177 0.3117 0.3393 0.3145 0.3187 0.3081 0.3049 0.3154 0.3119 0.3145 0.3187 0.3135 0.3256 0.3068 0.3113 0.3055 0.3177 0.3154 0.3119 0.3226 0.3188 0.3221 0.3261 0.3041 0.3240 0.3145 0.3187 0.3616 0.3135 0.3256 0.3028 0.3304 0.3688 0.3216 0.3334 0.3117 0.3393 0.3107 0.3461 0.3126 0.3324 0.3015 0.3368 0.3688 0.3041 0.3240 0.3117 0.3393 0.3760 0.3126 0.3324 0.3205 0.3481 0.3200 0.3554 0.3107 0.3461 P1 P2 P3 P4 P5 0.3145 0.3187 0.3135 0.3256 0.3221 0.3261 0.3216 0.3334 0.3135 0.3256 0.3126 0.3324 0.3210 0.3408 0.3117 0.3393 0.3028 0.3304 P6 P7 P8 P9 PA Q rank (5700K) Q1 Q2 Q3 Q4 Q5 0.3222 0.3243 0.3292 0.3461 0.3294 0.3306 0.3293 0.3384 0.3373 0.3534 0.3376 0.3616 0.3217 0.3316 0.3292 0.3539 0.3294 0.3306 0.3227 0.3170 0.3366 0.3369 0.3295 0.3228 0.3369 0.3451 0.3294 0.3306 0.3293 0.3384 0.3222 0.3243 0.3217 0.3316 0.3295 0.3228 0.3293 0.3384 0.3363 0.3287 0.3292 0.3461 0.3366 0.3369 0.3212 0.3389 0.3294 0.3306 0.3293 0.3384 0.3207 0.3462 0.3369 0.3451 0.3292 0.3539 0.3373 0.3534 0.3291 0.3617 0.3292 0.3461 0.3202 0.3535 0.3212 0.3389 0.3292 0.3539 0.3292 0.3461 0.3376 0.3616 0.3292 0.3539 0.3379 0.3698 0.3207 0.3462 0.3291 0.3617 Q6 Q7 Q8 Q9 QA Notes: SAMSUNG ELECTRONICS maintains ±0.007 tolerance of Cx, Cy http://www.samsungled.com 9 / 49 2. Luminous Flux Characteristics (Ts = 25℃) Nominal Minimum CCT CRI 2700K 3000K 3500K 4000K 80 80 80 80 If(mA) Vf(V) Power(W) Flux(lm) lm/W 50 2.85 0.14 16.3 114 60 2.88 0.17 19.4 112 65 2.91 0.19 20.9 110 70 2.94 0.21 22.4 109 80 2.97 0.24 25.1 106 90 3.00 0.27 27.6 102 100 3.03 0.30 30.3 100 150 3.14 0.47 41.8 89 50 2.85 0.14 16.8 118 60 2.88 0.17 20.1 116 65 2.91 0.19 21.6 114 70 2.94 0.21 23.1 112 80 2.97 0.24 25.9 109 90 3.00 0.27 28.5 106 100 3.03 0.30 31.3 103 150 3.14 0.47 43.2 92 50 2.85 0.14 17.6 124 60 2.88 0.17 21.0 122 65 2.91 0.19 22.6 119 70 2.94 0.21 24.2 118 80 2.97 0.24 27.1 114 90 3.00 0.27 29.8 111 100 3.03 0.30 32.8 108 150 3.14 0.47 45.2 96 50 2.85 0.14 18.3 129 60 2.88 0.17 21.9 126 65 2.91 0.19 23.5 124 70 2.94 0.21 25.1 122 80 2.97 0.24 28.2 119 90 3.00 0.27 31.0 115 100 3.03 0.30 34.1 113 150 3.14 0.47 47.0 100 Notes: Luminous Flux(Φv, lm) values are for representative reference only http://www.samsungled.com 10 / 49 2. Luminous Flux Characteristics (Ts = 25℃) Nominal Minimum CCT CRI 5000K 5700K 6500K 80 80 80 If(mA) Vf(V) Power(W) Flux(lm) lm/W 50 2.85 0.14 18.7 131 60 2.88 0.17 22.3 129 65 2.91 0.19 24.0 127 70 2.94 0.21 25.7 125 80 2.97 0.24 28.8 121 90 3.00 0.27 31.7 117 100 3.03 0.30 34.8 115 150 3.14 0.47 48.0 102 50 2.85 0.14 18.2 127 60 2.88 0.17 21.7 125 65 2.91 0.19 23.3 123 70 2.94 0.21 24.9 121 80 2.97 0.24 28.0 118 90 3.00 0.27 30.8 114 100 3.03 0.30 33.8 112 150 3.14 0.47 46.6 99 50 2.85 0.14 17.9 126 60 2.88 0.17 21.4 124 65 2.91 0.19 23.0 122 70 2.94 0.21 24.6 120 80 2.97 0.24 27.6 116 90 3.00 0.27 30.4 113 100 3.03 0.30 33.4 110 150 3.14 0.47 46.0 98 Notes: Luminous Flux(Φv, lm) values are for representative reference only http://www.samsungled.com 11 / 49 3. Characteristics 1) Absolute Maximum Rating Item Symbol Rating Condition Operating temperature range Top -40℃ ~ +85℃ - Storage temperature range Tstg -40℃ ~ +100℃ - LED junction temperature TJ 110℃ - Forward Current IF 150 mA - Peak Pulsed Forward Current IFP 300 mA Duty 1/10 pulse width 10ms Thermal resistance Rth, j-s 20℃/W Junction to solder point Assembly Process Temperature - 260℃, < 10sec - ESD - 5kV HBM 2) Electro-optical Characteristics Item Unit Nominal CCT Product Code 1) Forward Voltage (VF) (@65 mA, Ts = 25℃) Typ Max 2.70 2.80 2.90 3.00 3.10 19.00 21.50 24.00 19.50 22.00 24.50 20.00 22.50 25.00 21.00 23.50 26.00 22.00 24.50 27.00 21.50 24.00 26.50 21.00 23.50 26.00 - 2.80 2.90 3.00 3.10 3.20 21.50 24.00 26.00 22.00 24.50 26.50 22.50 25.00 27.00 23.50 26.00 28.00 24.50 27.00 29.00 24.00 26.50 28.50 23.50 26.00 28.00 - 2700K (P0) *WAW0SY *WAW0SZ *WAW0S1 *WAV0SY *WAV0SZ *WAV0S1 *WAU0SY *WAU0SZ *WAU0S1 *WAT0SY *WAT0SZ *WAT0S1 *WAR0SY *WAR0SZ *WAR0S1 *WAQ0SY *WAQ0SZ *WAQ0S1 *WAP0SY *WAP0SZ *WAP0S1 V - - - 0.7 - 1.2 - - - 5 - 80 0 - - 3000K (V0) 3500K (U0) lm 4000K (T0) 5000K (R0) 5700K (Q0) 6500K Reverse Voltage (@5 mA, Ts = 25℃) Color Rendering Index3)(Ra) Special CRI4) (R9) AZ A1 WA A2 A3 A4 SY SZ S1 SY SZ S1 SY SZ S1 SY SZ S1 SY SZ S1 SY SZ S1 SY SZ S1 Min - V (W0) Luminous Flux2) (Φv) (@65 mA, Ts = 25℃) Rank Notes: 1)~4) SAMSUNG ELECTRONICS maintains a tolerance of VF:±0.1 V, Φv:±5 %, Ra :±3.0, R9 :±6.5 on measurements 5) " * " is Product Code of "SPMWHT223MD5" http://www.samsungled.com 12 / 49 4. Typical Characteristics Graph (@65mA, Ts = 25℃) 1) Spectrum Distribution [CCT : 2700K & 3000K] [CCT : 3500K & 4000K] http://www.samsungled.com 13 / 49 [CCT : 5000K] [CCT : 5700K~6500K] http://www.samsungled.com 14 / 49 2) Forward Current Characteristics (Ts = 25℃) [Relative Luminous Flux vs. Forward Current] [Forward Current vs. Forward Voltage] http://www.samsungled.com 15 / 49 3) Temperature Characteristics (@65mA) [Relative Luminous Flux vs. Ts] [Forward Voltage vs. Ts] http://www.samsungled.com 16 / 49 [Color △x, △y vs. Ts] 4) Color shift Characteristics (Ts = 25℃) [Forward Current vs. Color △x, △y] http://www.samsungled.com 17 / 49 5) Derating Curve 6) Beam Angle Characteristics (@65mA, Ts = 25℃) http://www.samsungled.com 18 / 49 5. Outline Drawing & Dimension ⓐ ⓑ Cathode Anode 1. Tolerance is ±0.1 mm 2. The maximum compressing force is 15N on the silicone ⓐ 3. Do not place pressure on the encapsulation resin ⓑ Recommended Land Pattern 2.0 0.1 Notes: 1) This LED has built-in ESD protection device(s) connected in parallel to LED Chip(s). 2) Ts point & measurement method ① Measure the nearest point to the thermal pad. If necessary, remove PSR of PCB to reach Ts point. ② Thermal pad must be soldered to the PCB to dissipate heat properly. Otherwise, LED can be damaged. 3) Precautions ① The pressure on the LEDs will influence to the reliability of the LEDs. Precautions should be taken to avoid the strong pressure on the LEDs. Do not put stress on the LEDs during heating. ② Re-soldering should not be done after the LEDs have been soldered. If re-soldering is unavoidable, LED`s characteristics should be carefully checked before and after such repair. ③ Do not stack assembled PCBs together. Since materials of LEDs is soft, abrasion between two PCB assembled with LED might cause catastrophic failure of the LEDs. http://www.samsungled.com 19 / 49 6. Reliability Test Items & Conditions 1) Test Items and Results Test Item Test Conditions Test Hours/Cycles Sample No MSL Test 125℃, 24hrs → 60℃, 60%RH, 120hrs → Peak 260±5℃, 220℃ over time 60sec, 3 cycles 1 cycle 11 Room Temperature Life Test 25℃±3℃, DC 150mA 1,000 hrs 22 High Temperature Life Test 85℃±3℃, DC 150mA 1,000 hrs 22 High Temperature Humidity Life Test 85℃±3℃, 85%±2%RH, DC 150mA 1,000 hrs 22 Low Temperature Life Test -40℃±3℃, DC 150mA 1,000 hrs 22 Powered Temperature Cycle Test -45℃/20min ↔ 85℃/20min, Sweep 100min cycle on/off: each 5min, DC 150mA 100 cycles 22 Thermal Shock -45℃/15min ↔ 125℃/15min, → Hot plate 180℃ 500 cycles 100 High Temperature Storage Ta=120℃±3℃ 1,000 hrs 11 Low Temperature Storage Ta=-40℃±3℃ 1,000 hrs 11 ESD(HBM) R1 : 10MΩ, R2 : 1.5KΩ, C : 100pF, V = ±5kV 5 times 5 ESD(MM) R1 : 10MΩ, R2 : 0, C : 200pF, V = ±0.5kV 5 times 5 Vibration Test 20~2000~20 Hz 200 m/s2, Sweep 4 min X, Y, Z 3 direction, each 1 cycle 4 cycles 11 Mechanical Shock Test 1500G, 0.5ms, 3 shocks each X-Y-Z axis 5 cycles 11 2) Criteria for Judging the Damage Item Symbol Limit Test Condition Min Max Forward Voltage VF IF = 65 ㎃ Init. Value*0.9 Init. Value*1.1 Luminous Flux Φv IF = 65 ㎃ Init. Value*0.7 Init. Value*1.1 http://www.samsungled.com 20 / 49 7. Solder Conditions 1) Reflow Conditions ( Pb Free ) Reflow Frequency : 2 times max. 2) For Manual Soldering Not more than 5 seconds @Max. 300℃, under soldering iron. http://www.samsungled.com 21 / 49 8. Tape & Reel Start End More than 40 ㎜ Mounted with More than (100~200)㎜ Leading part more than Unloaded tape Flash LED Unloaded tape (200~400)㎜ (1) Quantity : The quantity/reel to be 4,000 pcs. (2) Cumulative Tolerance : Cumulative tolerance/10 pitches to be ±0.2 ㎜ (3) Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7 N when the cover tape is turned off from the carrier tape at 10 ℃ angle to be the carrier tape. (4) Packaging : P/N, Manufacturing data code no. and quantity to be indicated on a damp proof package. http://www.samsungled.com 22 / 49 9. Label Structure 1) Label Structure ⓐⓑⓒⓓⓔⓕ A1★1S1 SPMWHT223MD5WA★0S0 A1★1S1 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAV94001 / 1001 / 4,000 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII Rank Code N.B) Denoted rank is the only example. '★' means All kind of Chromaticity Coordinate Rank. Rank Code ⓐⓑ ⓒⓓ : Forward Voltage(VF) Rank (refer to page. 12) : Chromaticity Coordinate Rank (refer to page. 7~9) ⓔⓕ : Luminous Intensity(cd) Rank (refer to page. 3 and 4) 2) LOT Number The Lot number is composed of the following characters A1★1S1 SPMWHT223MD5WA★0S0 A1★1S1 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAV94001 / 1001 / 4,000 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII ①②③④⑤⑥⑦⑧⑨ / 1ⓐⓑⓒ / 4,000 PCS ① : Production Site (S:SAMSUNG ELECTRONICS, G:GOSIN CHINA) ② : L (LED) ③ : Product State (A:Normality, B:Bulk, C:First Production, R:Reproduction, S:Sample) ④ : Year (V:2011, W:2012, X:2013...) ⑤ : Month (1 ~ 9, A, B) ⑥ : Day (1 ~ 9, A, B ~ V) ⑦⑧⑨ : SAMSUNG ELECTRONICS LED Product number (1 ~ 999) ⓐⓑⓒ : Reel Number (1 ~ 999) http://www.samsungled.com 23 / 49 10. Packing Structure 1) Packing Process Reel A1★1S1 SPMWHT223MD5WA★0S0 A1★1S1 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAV94001 / 1001 / 4,000 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII LEVEL 2a Aluminum Vinyl Bag A1★1S1 SPMWHT223MD5WA★0S0 A1★1S1 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAV94001 / 1001 / 4,000 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII Material : Paper(SW3B(B)) TYPE 7inch SIZE(mm) L W H 245 220 182 ① SIDE ① A1★1S1 SPMWHT223MD5WA★0S0 A1★1S1 01 H CHIP LED IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII W GLAV94001 / 1001 / 40,000 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII L [Box Label] http://www.samsungled.com 24 / 49 2) Aluminum Packing Bag A1★1S1 SPMWHT223MD5WA★0S0 A1★1S1 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAV94001 / 1001 / 4,000 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII Silica gel & Humidity Indicator Card in Aluminum Vinyl Bag http://www.samsungled.com 25 / 49 11. Precaution for use 1) For over-current-proof function, customers are recommended to apply resistors to prevent sudden change of the current caused by slight shift of the voltage. 과전류 방지를 위해 전압의 미세한 이동에 의해 야기되는 전류의 순간 변화를 방지하기 위해 저항 등의 설치를 권장함. 2) This device should not be used in any type of fluid such as water, oil, organic solvent, etc. When washing is required, IPA is recommended to use. 제품은 물, 오일, 유기물과 같은 액체 타입에서의 사용은 제한되며, 세정이 필요할 시에는 IPA 사용을 권장함. 3) When the LEDs illuminate, operating current should be decided after considering the ambient maximum temperature. LED의 발광 시, 동작 전류는 주변 최고온도를 고려하여 결정되어야 함. 4) LEDs must be stored in a clean environment. If the LEDs are to be stored for 3 months or more after being shipped from Samsung Electronics, they should be packed by a sealed container with nitrogen gas injected.(Shelf life of sealed bags: 12 months, temp. ~40℃, ~90%RH) LED의 보관은 청정한 환경에서 보존되어져야 하며, 만약 삼성전자로부터 공급받는 후 3개월 또는 그 이상 보관이 필요하다면 질소 가스를 동봉한 보존용기에 보관되어야 함. (보존 bag의 수명 : 12 개월, 보존 온도 ~40℃, 습도 ~90%RH) 5) After storage bag is open, device subjected to soldering, solder reflow, or other high temperature processes must be: 보존 Bag이 개봉된 후에, 납땜이나 reflow등의 높은 온도에 노출되는 제품은 다음의 사항에 부합되어야 함. a. Mounted within 672 hours(28 days) at an assembly line with a condition of no more than 30℃/60%RH, a. 제품은 30℃/60%RH보다 같거나 낮은 조립조건에서 672시간(28일)이내에 조립해야 함. b. Stored at <10%RH. b. 10% 이하의 상대습도에서 보관되어야 함. 6) Repack unused Products with anti-moisture packing, fold to close any opening and then store in a dry place. 사용하지 않은 제품은 방습팩에 넣어 개봉 부위를 닫아서 다시 포장한 후, 건조한 장소에서 보관할 것을 권장함. http://www.samsungled.com 26 / 49 7) Devices require baking before mounting, if humidity card reading is >60% at 23±5℃. 만약 습도표시카드의 수치가 23±5℃에서 60% 이상이라면, 제품 실장 전 baking해야 함. 8) Devices must be baked for 1 hour at 65±5℃, if baking is required. 만약 baking이 필요하다면, 제품은 65±5℃에서 1시간 정도 baking 되어야 함. 9) The LEDs are sensitive to the static electricity and surge. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. LED는 정전기 및 서지에 민감한 제품이므로, LED 제품을 다룰 시에는 정전기 방지장갑이나 손목밴드를 사용하기를 권장함. If voltage exceeding the absolute maximum rating is applied to LEDs, it may cause damage or even destruction to LED devices. 만약 절대 허용치를 초과하는 전압이 LED에 가해지면, LED 소자는 파괴되거나 손상될 수 있음. Damaged LEDs may show some unusual characteristics such as increase in leak current, lowered turn-on voltage, or abnormal lighting of LEDs at low current. 손상된 제품은 누설전류의 증가, Turn on 전압의 저하, 저 전류에서의 점등불량 등의 이상 거동을 보일 수 있음. 10) VOCs (volatile organic compounds) can be generated from adhesives, flux, hardener or organic additives used in luminaires (fixtures). Transparent LED silicone encapsulant is permeable to those chemicals and they may lead a discoloration of encapsulant when they expose to heat or light. VOCs(휘발성 유기 화합물)는 등기구에 사용되는 접착제, Flux, 경화제, 유기물 첨가제에서 발생하여 LED 실리콘 봉지제를 투과하고, 빛 또는 열에 노출되었을 때 변색이 발생 할 수 있음. This phenomenon can cause a significant loss of light emitted(output) from the luminaires(fixtures). 이러한 현상은 등기구로부터 나오는 빛의 중대한 손실을 줄 수 있음. In order to prevent these problems, we recommend you to know the physical properties of the materials used in luminaires, They must be selected carefully. 이러한 문제 발생 방지를 위해서, 등기구에 사용되는 자재에 대한 물성을 알고 주의하여 선택 되어야함. http://www.samsungled.com 27 / 49 11) Risk of Sulfurization (or Tarnishing) The lead frame from Samsung Electronics is a plated package and it may change to black(or dark colored) when it is exposed to Ag (a), Sulfur (S), Cchlorine (Cl) or other halogen compound. It requires attention. 삼성전자의 리드 프레임은 Ag(은)을 도금한 Package 제품으로 황(S), 염소(Cl), 또는 다른 할로겐 화합물들에 노출시 Ag(은)은 검정(또는 어두운색)으로 바뀔 수 있으니 주의가 필요함. Sulfurization of lead frame may cause intensity degradation, change of chromaticity coordinates and, in extreme cases, open circuit. It requires caution. 리드 프레임의 황화(Sulfurization)는 광량 저하, 색좌표 변화 및 심한 경우 회로내의 LED 무등(Open) 불량을 일으킬 수도 있으니 주의가 필요함. Due to possible sulfurization of lead frame, LED should not be used and stored together with oxidizing substances made of materials in a following list, : Rubber, plain paper, lead solder cream and so on. 리드 프레임 황화(Sulfurization)의 근원이 될 수 있으니 LED는 아래의 목록으로 만들어진 산화성 물질들과 함께 저장, 사용이 불가함 : 고무, 일반 종이, 남땜 크림 등 http://www.samsungled.com 28 / 49 12. Hazard Substance Analysis - SGS http://www.samsungled.com 29 / 49 http://www.samsungled.com 30 / 49 http://www.samsungled.com 31 / 49 http://www.samsungled.com 32 / 49 http://www.samsungled.com 33 / 49 http://www.samsungled.com 34 / 49 12. Hazard Substance Analysis - SVHC(REACH) http://www.samsungled.com 35 / 49 http://www.samsungled.com 36 / 49 http://www.samsungled.com 37 / 49 http://www.samsungled.com 38 / 49 http://www.samsungled.com 39 / 49 http://www.samsungled.com 40 / 49 http://www.samsungled.com 41 / 49 http://www.samsungled.com 42 / 49 http://www.samsungled.com 43 / 49 http://www.samsungled.com 44 / 49 http://www.samsungled.com 45 / 49 http://www.samsungled.com 46 / 49 http://www.samsungled.com 47 / 49 http://www.samsungled.com 48 / 49 Revision History Date N0 Revision History 2013.02.14 001 New version http://www.samsungled.com Writer Drawn Approved T.J KIM Y.T KIM 49 / 49