AP4341S

AP4341S
DYNAMIC PSR ACCELERATOR
Description
Pin Assignments
NEW PRODUCT
The AP4341S is an output voltage detector for Primary Side Control
System. It is a low power loss solution. It detects the output voltage
and provides a periodical signal when the output voltage is lower than
a certain threshold. The periodical signal can be coupled by the
transformer to the primary side and provided as an awakening signal
for the main primary side controller. By fast response to secondary
side voltage, the AP4341S can effectively improve the transient
performance of Primary Side Control System.
(Top View)
GND
3
The AP4341S will enable a discharge circuit when it detects the
output voltage is higher than a certain threshold.
The AP4341S can cooperate with some PSR ICs, such as AP3775,
GP350H and GP350BX.
1
2
VCC
OUT
SOT23
The AP4341S is available in SOT23 package.
Applications
Features






Fast Detector of Supply Voltages
33kHz Output Pulse
No External Components
Low Power Loss for Green Mode Applications
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Notes:


Adapters/Chargers for Cell/Cordless Phones, ADSL Modems,
MP3 and Other Portable Apparatus
Standby and Auxiliary Power Supplies
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
Typical Applications Circuit
L1
FR1
TR1
D1
C8
R12
R3
D4 to D7
R6
C1
+
C2
R7
D2
+
OUT VCC
R4
GND
R11
L2
C5
D3
IC2
AP4341S
+
C3
+
C4
VO
R10
Q1
IC1
CS
CPC
R5
C6
VCC
R16
OUT
FB
EM
GND
IS
R17
R2
AP4341S
Document number: DS38219 Rev. 2 - 2
1 of 8
www.diodes.com
December 2015
© Diodes Incorporated
AP4341S
Pin Number
Pin Name
Function
1
VCC
Power supply pin, connected with one end of the secondary winding and the output
capacitance
2
OUT
Secondary detecting pin, connected with the other end of the secondary winding
3
GND
Ground pin, connected with secondary side GND of the system
Functional Block Diagram
VCC
1
2
OUT
VREF
UVLO
+
-
OUT
COMP
VREF
UVLO
tONP
Detector
DRIVER
NEW PRODUCT
Pin Descriptions
DYNAMIC
Control
Logic
+
OSC
-
VDIS
COMP
VREF
VREF
VDISCHARGE
+
VCC
-
VCC
Discharge
OVP
OVP
VCC
Band-gap
VREF
+
3
GND
AP4341S
Document number: DS38219 Rev. 2 - 2
2 of 8
www.diodes.com
December 2015
© Diodes Incorporated
AP4341S
Absolute Maximum Ratings (Note 4)
Parameter
Rating
Unit
Supply Voltage VCC
-0.3 to 7
V
Voltage at OUT
-40 to 9
V
Internally limited
A
Power Dissipation at TA= +25ºC
0.4
W
Operating Junction Temperature
+150
ºC
-65 to +150
ºC
Lead Temperature (Soldering, 10 sec)
+300
ºC
Thermal Resistance (Junction to Case)
140
ºC/W
NEW PRODUCT
Output Current at OUT
Storage Temperature
Note:
4. Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “Recommended Operating Conditions” is not implied.
Exposure to “Absolute Maximum Ratings” for extended periods may affect device reliability.
Recommended Operating Conditions
Symbol
Parameter
VCC
Supply Voltage
TA
Ambient Temperature
Electrical Characteristics
Symbol
Min
Max
Unit
2
6
V
-40
+85
ºC
(VCC =5V, TA=+25°C, unless otherwise specified.)
Parameter
Conditions
Min
Typ
Max
Unit
Supply Voltage ( VCC Pin )
VON
Power-on Voltage
–
2.1
2.5
2.9
V
IST
Startup Current
VCC=2.1V
15
30
65
μA
IOP
Operating Current
OUT pin floating,
VCC=VTRI+20mV
30
80
120
μA
VOFF
Power-off Voltage
–
1.9
2.3
2.7
V
VTRI
Internal Trigger Voltage
–
5.05
5.10
5.15
V
Duty Cycle
VCC=4.9V
1.5
5
6.5
%
tOSC
Oscillation Period
VCC=4.9V
25
30
35
μs
IOUT
Output Maximum Current
VCC=4.9V
26
31
36
mA
tDIS
Minimum Period
–
55
70
80
ms
VDIS
Discharge Voltage
–
5.10
5.15
5.20
V
IDIS
Discharge Current
–
0.5
1
1.5
mA
VOVP
Overshoot Voltage for Discharge
–
5.15
5.25
5.45
V
IOVP
Overshoot Current for Discharge
–
40
100
160
mA
Output Section/ Oscillator Section
–
Note:
5. The system output voltage is 5V.
AP4341S
Document number: DS38219 Rev. 2 - 2
3 of 8
www.diodes.com
December 2015
© Diodes Incorporated
AP4341S
Operation Description
VOVP
VDIS
VDIS
VTRI
VTRI
NEW PRODUCT
VCC VON
VOFF
UVLO
Dynamic
IOVP
IDIS
IVCC
tDIS
2ms
Figure 1. Typical Waveforms of AP4341S
When VCC voltage is beyond power-on voltage (VON), the AP4341S starts up. The OUT pin asserts a periodical pulse and oscillation period is
tOSC. When VCC voltage is beyond trigger voltage (VTRI), the periodical pulse in OUT pin is discontinued. When VCC voltage is beyond discharge
voltage (VDIS), the discharge circuit will be enabled, a 1mA current will flow into VCC pin. When VCC voltage is higher than overshoot voltage
(VOVP), the AP4341S will enable a discharge circuit until the VCC voltage falls below the overshoot voltage. At the same time, the periodical pulse
in OUT pin will be disabled.
When the VCC voltage is below power-off voltage (VOFF), the AP4341S will be shut down.
AP4341S
Document number: DS38219 Rev. 2 - 2
4 of 8
www.diodes.com
December 2015
© Diodes Incorporated
AP4341S
Ordering Information
AP4341S X XX - XX
Product Name
Package
NEW PRODUCT
N: SOT23
Packing
TR: Tape & Reel
RoHS/Green
G1: Green
Package
Temperature Range
Part Number
Marking ID
Packing
SOT23
-40 to +85C
AP4341SNTR-G1
GFB
3000/Tape & Reel
Marking Information
GFB
AP4341S
Document number: DS38219 Rev. 2 - 2
: Logo
GFB: Marking ID
5 of 8
www.diodes.com
December 2015
© Diodes Incorporated
AP4341S
Package Outline Dimensions (All dimensions in mm(inch).)
(1)
Package Type: SOT23
3.0 °
7.0°
NEW PRODUCT
0.500(0.020)
0.700(0.028)
2.0°
1.050(0.041)REF
0.0°~10.0°
0.010(0.0004)
0.100(0.004) 0.200(0.008)MIN
Document number: DS38219 Rev. 2 - 2
7.0°
0.080(0.003)
0.180(0.007)
0.550(0.022)REF
1.200(0.047)
1.400(0.055)
2.300(0.091)
2.500(0.098)
AP4341S
R0.100(0.004)
0.900(0.035)
1.100(0.043)
2.800(0.110)
3.000(0.118)
0.890(0.035)
1.030(0.041)
0.100(0.004) GAUGE PLANE
4×R0.100(0.004)
0.300(0.012)
0.510(0.020)
1.900(0.075)REF
6 of 8
www.diodes.com
December 2015
© Diodes Incorporated
AP4341S
Suggested Pad Layout
(1)
Package Type: SOT23
Grid placement courtyard
NEW PRODUCT
Y
Z
G
Y
X
E
Dimensions
Z
(mm)/(inch)
G
(mm)/(inch)
X
(mm)/(inch)
Y
(mm)/(inch)
E
(mm)/(inch)
Value
2.900/0.114
1.100/0.043
0.800/0.031
0.900/0.035
0.950/0.037
AP4341S
Document number: DS38219 Rev. 2 - 2
7 of 8
www.diodes.com
December 2015
© Diodes Incorporated
AP4341S
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
NEW PRODUCT
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2015, Diodes Incorporated
www.diodes.com
AP4341S
Document number: DS38219 Rev. 2 - 2
8 of 8
www.diodes.com
December 2015
© Diodes Incorporated