IRF7478 Data Sheet (128 KB, EN)

PD- 95280
IRF7478PbF
SMPS MOSFET
HEXFET® Power MOSFET
Applications
High frequency DC-DC converters
l Lead-Free
VDSS
l
Benefits
l Low Gate to Drain Charge to Reduce
Switching Losses
l Fully Characterized Capacitance Including
Effective COSS to Simplify Design, (See
App. Note AN1001)
l Fully Characterized Avalanche Voltage
and Current
RDS(on) max (mW)
ID
26@VGS = 10V
4.2A
30@VGS = 4.5V
3.5A
60V
A
A
D
1
8
S
2
7
D
S
3
6
D
G
4
5
D
S
SO-8
Top View
Absolute Maximum Ratings
Parameter
ID @ TA = 25°C
ID @ TA = 70°C
IDM
PD @TA = 25°C
VGS
dv/dt
TJ
TSTG
Continuous Drain Current, VGS @ 10V
Continuous Drain Current, VGS @ 10V
Pulsed Drain Current 
Power Dissipation„
Linear Derating Factor
Gate-to-Source Voltage
Peak Diode Recovery dv/dt †
Operating Junction and
Storage Temperature Range
Soldering Temperature, for 10 seconds
Max.
Units
7.0
5.6
56
2.5
0.02
± 20
3.7
-55 to + 150
A
W
W/°C
V
V/ns
°C
300 (1.6mm from case )
Thermal Resistance
Symbol
RθJL
RθJA
Parameter
Junction-to-Drain Lead
Junction-to-Ambient „
Typ.
Max.
Units
–––
–––
20
50
°C/W
Notes  through † are on page 8
www.irf.com
1
09/21/04
IRF7478PbF
Static @ TJ = 25°C (unless otherwise specified)
Parameter
Drain-to-Source Breakdown Voltage
∆V(BR)DSS/∆TJ Breakdown Voltage Temp. Coefficient
V(BR)DSS
RDS(on)
Static Drain-to-Source On-Resistance
VGS(th)
Gate Threshold Voltage
IDSS
Drain-to-Source Leakage Current
IGSS
Gate-to-Source Forward Leakage
Gate-to-Source Reverse Leakage
Min.
60
–––
–––
–––
1.0
–––
–––
–––
–––
Typ.
–––
0.065
20
23
–––
–––
–––
–––
–––
Max. Units
Conditions
–––
V
VGS = 0V, ID = 250µA
––– V/°C Reference to 25°C, ID = 1mA
26
VGS = 10V, ID = 4.2A ƒ
mΩ
30
VGS = 4.5V, ID = 3.5A ƒ
3.0
V
VDS = VGS, ID = 250µA
20
VDS = 48V, VGS = 0V
µA
100
VDS = 48V, VGS = 0V, TJ = 125°C
100
VGS = 20V
nA
-100
VGS = -20V
Dynamic @ TJ = 25°C (unless otherwise specified)
gfs
Qg
Qgs
Qgd
td(on)
tr
td(off)
tf
Ciss
Coss
Crss
Coss
Coss
Coss eff.
Parameter
Forward Transconductance
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain ("Miller") Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Output Capacitance
Output Capacitance
Effective Output Capacitance
Symbol
EAS
IAR
Min.
17
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
Typ.
–––
21
4.3
9.6
7.7
2.6
44
13
1740
300
37
1590
220
410
Max. Units
Conditions
–––
S
VDS = 50V, ID = 4.2A
31
ID = 4.2A
–––
nC
VDS = 48V
–––
VGS = 4.5V
–––
VDD = 30V
–––
I
D = 4.2A
ns
–––
RG = 6.2Ω
–––
VGS = 10V ƒ
–––
VGS = 0V
–––
VDS = 25V
–––
pF
ƒ = 1.0MHz
–––
VGS = 0V, VDS = 1.0V, ƒ = 1.0MHz
–––
VGS = 0V, VDS = 48V, ƒ = 1.0MHz
–––
VGS = 0V, VDS = 0V to 48V …
Parameter
Single Pulse Avalanche Energy‚
Avalanche Current
Typ.
Max.
Units
–––
–––
140
4.2
mJ
A
Diode Characteristics
IS
ISM
VSD
trr
Qrr
2
Parameter
Continuous Source Current
(Body Diode)
Pulsed Source Current
(Body Diode) 
Diode Forward Voltage
Reverse Recovery Time
Reverse RecoveryCharge
Min. Typ. Max. Units
–––
–––
2.3
–––
–––
56
–––
–––
–––
–––
52
100
1.3
78
150
A
V
ns
nC
Conditions
MOSFET symbol
showing the
G
integral reverse
p-n junction diode.
TJ = 25°C, IS = 4.2A, VGS = 0V
TJ = 25°C, I F = 4.2A
di/dt = 100A/µs ƒ
D
S
ƒ
www.irf.com
IRF7478PbF
100
100
VGS
15V
10V
4.5V
3.7V
3.5V
3.3V
3.0V
BOTTOM 2.7V
10
2.7V
20µs PULSE WIDTH
TJ = 25 °C
1
0.1
1
10
10
2.5
RDS(on) , Drain-to-Source On Resistance
(Normalized)
ID, Drain-to-Source Current (Α)
T J = 150°C
10
T J = 25°C
VDS = 25V
20µs PULSE WIDTH
3.0
3.5
Fig 3. Typical Transfer Characteristics
www.irf.com
1
10
100
Fig 2. Typical Output Characteristics
100
VGS, Gate-to-Source Voltage (V)
20µs PULSE WIDTH
TJ = 150 °C
VDS , Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
1
2.7V
1
0.1
100
VDS , Drain-to-Source Voltage (V)
2.5
VGS
15V
10V
4.5V
3.7V
3.5V
3.3V
3.0V
BOTTOM 2.7V
TOP
I D , Drain-to-Source Current (A)
I D , Drain-to-Source Current (A)
TOP
4.0
ID = 7.0A
2.0
1.5
1.0
0.5
0.0
-60 -40 -20
VGS = 10V
0
20
40
60
80 100 120 140 160
TJ , Junction Temperature ( °C)
Fig 4. Normalized On-Resistance
Vs. Temperature
3
IRF7478PbF
VGS = 0V,
f = 1 MHZ
Ciss = Cgs + Cgd, Cds SHORTED
Crss = Cgd
Coss = Cds + Cgd
Ciss
1000
Coss
100
Crss
1
10
ID = 4.2A
VDS = 48V
VDS = 30V
VDS = 12V
8
6
4
2
10
0
100
0
20
30
40
Fig 6. Typical Gate Charge Vs.
Gate-to-Source Voltage
Fig 5. Typical Capacitance Vs.
Drain-to-Source Voltage
1000
100
OPERATION IN THIS AREA LIMITED
BY RDS(on)
TJ = 150 ° C
I D , Drain Current (A)
100
10
1
TJ = 25 ° C
0.1
0.2
V GS = 0 V
0.6
1.0
10us
10
100us
1ms
1
1.4
1.8
VSD ,Source-to-Drain Voltage (V)
Fig 7. Typical Source-Drain Diode
Forward Voltage
4
10
QG , Total Gate Charge (nC)
VDS, Drain-to-Source Voltage (V)
ISD , Reverse Drain Current (A)
C, Capacitance(pF)
10000
10
VGS , Gate-to-Source Voltage (V)
100000
2.2
10ms
TA = 25 ° C
TJ = 150 ° C
Single Pulse
0.1
1
10
100
1000
VDS , Drain-to-Source Voltage (V)
Fig 8. Maximum Safe Operating Area
www.irf.com
IRF7478PbF
8.0
VDS
VGS
ID , Drain Current (A)
6.0
RD
D.U.T.
RG
+
-V DD
10V
4.0
Pulse Width ≤ 1 µs
Duty Factor ≤ 0.1 %
Fig 10a. Switching Time Test Circuit
2.0
VDS
90%
0.0
25
50
75
100
125
150
TC , Case Temperature ( °C)
10%
VGS
Fig 9. Maximum Drain Current Vs.
Ambient Temperature
td(on)
tr
t d(off)
tf
Fig 10b. Switching Time Waveforms
Thermal Response (Z thJA )
100
D = 0.50
0.20
10
0.10
0.05
0.02
1
0.01
PDM
t1
SINGLE PULSE
(THERMAL RESPONSE)
0.1
0.01
0.00001
t2
Notes:
1. Duty factor D = t 1 / t 2
2. Peak T J = P DM x Z thJA + TA
0.0001
0.001
0.01
0.1
1
10
100
t1 , Rectangular Pulse Duration (sec)
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Ambient
www.irf.com
5
0.028
RDS(on) , Drain-to -Source On Resistance ( Ω)
RDS (on) , Drain-to-Source On Resistance ( Ω)
IRF7478PbF
0.026
0.024
VGS = 4.5V
0.022
0.020
0.018
VGS = 10V
0.016
0
10
20
30
40
50
0.04
0.03
ID = 7.0A
0.02
0.01
60
0.0
ID , Drain Current (A)
2.0
4.0
6.0
8.0
10.0
12.0
14.0
16.0
VGS, Gate -to -Source Voltage (V)
Fig 12. On-Resistance Vs. Drain Current
Fig 13. On-Resistance Vs. Gate Voltage
Current Regulator
Same Type as D.U.T.
QG
VGS
.2µF
QGS
.3µF
D.U.T.
QGD
400
+
V
- DS
EAS , Single Pulse Avalanche Energy (mJ)
50KΩ
12V
VG
VGS
3mA
Charge
IG
ID
Current Sampling Resistors
Fig 14a&b. Basic Gate Charge Test Circuit
and Waveform
15V
V(BR)DSS
tp
L
VDS
D.U.T
RG
IAS
20V
I AS
tp
DRIVER
+
V
- DD
0.01Ω
Fig 15a&b. Unclamped Inductive Test circuit
and Waveforms
6
A
TOP
BOTTOM
ID
1.9A
3.4A
4.2A
300
200
100
0
25
50
75
100
125
150
Starting TJ , Junction Temperature ( °C)
Fig 15c. Maximum Avalanche Energy
Vs. Drain Current
www.irf.com
IRF7478PbF
SO-8 Package Outline
Dimensions are shown in millimeters (inches)
D
5
A
8
7
6
5
6
H
0.25 [.010]
1
2
3
A
4
MAX
MIN
.0532
.0688
1.35
1.75
A1 .0040
e
e1
0.25
.0098
0.10
.013
.020
0.33
0.51
c
.0075
.0098
0.19
0.25
D
.189
.1968
4.80
5.00
E
.1497
.1574
3.80
4.00
e
.050 BASIC
.025 BASIC
C
0.635 B ASIC
H
.2284
.2440
5.80
6.20
K
.0099
.0196
0.25
0.50
L
.016
.050
0.40
1.27
y
0°
8°
0°
8°
y
0.10 [.004]
0.25 [.010]
1.27 BASIC
K x 45°
A
8X b
MAX
b
e1
6X
MILLIMETERS
MIN
A
E
INCHES
DIM
B
A1
8X L
8X c
7
C A B
F OOTPRINT
NOT ES :
1. DIMENS IONING & TOLERANCING PER ASME Y14.5M-1994.
8X 0.72 [.028]
2. CONT ROLLING DIMENS ION: MILLIMET ER
3. DIMENS IONS ARE SHOWN IN MILLIMETERS [INCHES].
4. OUTLINE CONFORMS TO JEDEC OUTLINE MS -012AA.
5 DIMENS ION DOES NOT INCLUDE MOLD PROT RUSIONS .
MOLD PROTRUS IONS NOT TO EXCEED 0.15 [.006].
6 DIMENS ION DOES NOT INCLUDE MOLD PROT RUSIONS .
MOLD PROTRUS IONS NOT TO EXCEED 0.25 [.010].
6.46 [.255]
7 DIMENS ION IS T HE LENGT H OF LEAD FOR SOLDERING TO
A S UBST RAT E.
3X 1.27 [.050]
8X 1.78 [.070]
SO-8 Part Marking
EXAMPLE: T HIS IS AN IRF7101 (MOSFET )
INT ERNAT IONAL
RECT IFIER
LOGO
XXXX
F7101
DAT E CODE (YWW)
P = DES IGNAT ES LEAD-FREE
PRODUCT (OPT IONAL)
Y = LAS T DIGIT OF T HE YEAR
WW = WEEK
A = AS S EMBLY S IT E CODE
LOT CODE
PART NUMBER
www.irf.com
7
IRF7478PbF
SO-8 Tape and Reel
Dimensions are shown in millimeters (inches)
TERMINAL NUMBER 1
12.3 ( .484 )
11.7 ( .461 )
8.1 ( .318 )
7.9 ( .312 )
FEED DIRECTION
NOTES:
1. CONTROLLING DIMENSION : MILLIMETER.
2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS(INCHES).
3. OUTLINE CONFORMS TO EIA-481 & EIA-541.
330.00
(12.992)
MAX.
14.40 ( .566 )
12.40 ( .488 )
NOTES :
1. CONTROLLING DIMENSION : MILLIMETER.
2. OUTLINE CONFORMS TO EIA-481 & EIA-541.
Notes:
 Repetitive rating; pulse width limited by
max. junction temperature.
‚ Starting TJ = 25°C, L = 16mH
„ When mounted on 1 inch square copper board
… Coss eff. is a fixed capacitance that gives the same charging time
as Coss while VDS is rising from 0 to 80% VDSS
RG = 25Ω, IAS = 4.2A.
ƒ Pulse width ≤ 400µs; duty cycle ≤ 2%.
† ISD ≤ 4.2A, di/dt ≤ 160A/µs, VDD ≤ V(BR)DSS,
TJ ≤ 150°C
Data and specifications subject to change without notice.
This product has been designed and qualified for the Consumer market.
Qualifications Standards can be found on IR’s Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7903
Visit us at www.irf.com for sales contact information.09/04
8
www.irf.com