Teccor® brand Thyristors
8 Amp Sensitive & Standard SCRs
Sxx08xSx & Sxx08x Series
®
Description
Excellent unidirectional switches for phase control
applications such as heating and motor speed controls.
Sensitive gate SCRs are easily triggered with microAmps
of current as furnished by sense coils, proximity switches,
and microprocessors.
Standard phase control SCRs are triggered with few
milliamperes of current at less than 1.5V potential.
Features & Benefits
t3P)4DPNQMJBOU
t(MBTToQBTTJWBUFE
junctions
Agency Approval
Applications
Agency File Number
L Package: E71639
®
Typical applications are capacitive discharge systems for
strobe lights, nailers, staplers and gas engine ignition. Also
controls for power tools, home/brown goods and white
goods appliances.
Main Features
Symbol
IT(RMS)
VDRM /VRRM
I(5
t4VSHFDBQBCJMJUZVQ
to 100 A
Value
Unit
8
A
400 to 1000
V
0.2 to 15
mA
Internally constructed isolated packages are offered for
ease of heat sinking with highest isolation voltage.
Schematic Symbol
A
K
G
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
229
Revised: July 29, 2010 09:54 AM
Sxx08xSx & Sxx08x Series
8.0A SCRs
Agency
t7PMUBHFDBQBCJMJUZVQ
to 1000 V
Teccor® brand Thyristors
8 Amp Sensitive & Standard SCRs
Absolute Maximum Ratings — Sensitive SCRs
Symbol
Parameter
IT(RMS)
IT(AV)
Test Conditions
Sxx08LSy
TC = 80°C
RMS on-state current
Sxx08RSy
Sxx08DSy
Sxx08VSy
TC = 95°C
Sxx08LSy
TC = 80°C
Average on-state current
Sxx08RSy
Sxx08DSy
Sxx08VSy
TC = 95°C
Value
Unit
8
A
5.1
A
TJOHMFIBMGDZDMFG)[
TJ (initial) = 25°C
83
TJOHMFIBMGDZDMFG)[
TJ (initial) = 25°C
100
I2t Value for fusing
tp = 8.3 ms
41
A2s
di/dt
Critical rate of rise of on-state current
G)[5J = 110°C
70
A/μs
I(5.
Peak gate current
TJ = 110°C
1.6
A
P("7
Average gate power dissipation
TJ = 110°C
ITSM
Peak non-repetitive surge current
I2t
0.4
W
Storage temperature range
-40 to 150
°C
Operating junction temperature range
-40 to 110
°C
Value
Unit
8
A
5.1
A
Tstg
TJ
A
Note: xx = voltage, y = sensitivity
Absolute Maximum Ratings — Standard SCRs
Symbol
IT(RMS)
IT(AV)
ITSM
I2t
di/dt
I(.
P("7
Tstg
TJ
Parameter
Test Conditions
RMS on-state current
Average on-state current
Sxx08L
TC = 100°C
Sxx08R
Sxx08D
Sxx08V
TC = 110°C
Sxx08L
TC = 100°C
Sxx08R
Sxx08D
Sxx08V
TC = 110°C
TJOHMFIBMGDZDMFG)[
TJ (initial) = 25°C
83
TJOHMFIBMGDZDMFG)[
TJ (initial) = 25°C
100
I2t Value for fusing
tp = 8.3 ms
41
A2s
Critical rate-of-rise of on-state current
Peak non-repetitive surge current
A
G)[5J = 125°C
100
A/μs
Peak gate current
TJ = 125°C
2
A
Average gate power dissipation
TJ = 125°C
0.5
W
Storage temperature range
-40 to 150
°C
Operating junction temperature range
-40 to 125
°C
Note: xx = voltage
Sxx08xSx & Sxx08x Series
230
Revised: July 29, 2010 09:54 AM
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
8 Amp Sensitive & Standard SCRs
Electrical Characteristics (TJ = 25°C, unless otherwise specified) – Sensitive SCRs
Symbol
I(5
V(5
Value
Test Conditions
Sxx08xS2
MAX.
VD = 6V RL = 100 8
Sxx08xS3
200
MAX.
500
Unit
μA
0.8
V
dv/dt
VD = VDRM; R(, = 1kΩ; TJ = 110°C
TYP.
8
V/μs
V(%
VD = VDRM RL = 3.3 k8 TJ = 110°C
MIN.
0.2
V
V(3.
I(3 = 10μA
MIN.
6
V
I)
IT = 20mA (initial)
MAX.
6
8
tq
IT=2A; tp=50μs; dv/dt=5V/μs; di/dt=-30A/μs
MAX.
50
45
mA
μs
tgt
I( = 2 x I(5 PW = 15μs IT = 12A
TYP.
4
5
μs
Note: xx = voltage x = package
Electrical Characteristics (TJ = 25°C, unless otherwise specified) – Standard SCRs
I(5
V(5
Test Conditions
MAX.
VD = 12V RL = 60 8
MAX.
VD = VDRM; gate open; TJ = 100°C
600V
300
250
MIN.
400V
VD = VDRM; gate open; TJ = 125°C
mA
V
350
800V
Unit
1.5
400V
1000V
dv/dt
Value
Sxx08x
15
100
V/μs
250
600V
225
800V
200
V(%
VD = VDRM RL = 3.3 k8 TJ = 125°C
MIN.
0.2
V
I)
IT = 200mA (initial)
MAX.
30
mA
tq
IT=2A; tp=50μs; dv/dt=5V/μs; di/dt=-30A/μs
MAX.
35
μs
tgt
I( = 2 x I(5 PW = 15μs IT = 16A
TYP.
2
μs
Note: xx = voltage x = package
Static Characteristics
Symbol
Test Conditions
VTM
IT = 16A; tp = 380 μs
Sxx08xyy
IDRM / IRRM
MAX.
Unit
1.6
V
TJ = 25°C
400 - 600V
5
TJ = 110°C
400 - 600V
250
400 - 800V
10
TJ = 25°C
VDRM = VRRM
Value
1000V
Sxx08x
TJ = 100°C
TJ = 125°C
MAX.
20
μA
400 - 800V
200
1000V
3000
400 - 800V
500
Note: xx = voltage, x = package, yy = sensitivity
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
231
Revised: July 29, 2010 09:54 AM
Sxx08xSx & Sxx08x Series
8.0A SCRs
Symbol
Teccor® brand Thyristors
8 Amp Sensitive & Standard SCRs
Thermal Resistances
Symbol
Parameter
Value
Sxx08RSy
1.8
Sxx08LSy
3.4
Sxx08VSy
2.1
Sxx08DSy
1.5
Sxx08R
1.8
Sxx08L
3.4
Sxx08V
2.0
Sxx08D
1.5
Sxx08RSy
40
Sxx08LSy
65
Sxx08VSy
85
Sxx08R
40
Sxx08L
50
Sxx08V
70
Unit
Junction to case (AC)
RR(J-C)
°C/W
Junction to ambient
RR(J-A)
°C/W
Note: xx = voltage, y = sensitivity
Figure 1: Normalized DC Gate Trigger Current
vs. Junction Temperature (Sensitive SCR)
Figure 2: Normalized DC Gate Trigger Current
vs. Junction Temperature (Standard SCR)
4.0
Ratio of IGT / IGT (TJ = 25°C)
Ratio of IGT / IGT (TJ = 25°C)
4.0
3.0
2.0
1.0
0.0
3.0
2.0
1.0
0.0
-40
-15
10
35
60
85
110
-40
Junction Temperature (TJ) - (°C)
Sxx08xSx & Sxx08x Series
-15
10
35
60
85
110
125
Junction Temperature (TJ) - (°C)
232
Revised: July 29, 2010 09:54 AM
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
8 Amp Sensitive & Standard SCRs
Figure 3: Normalized DC Gate Trigger Voltage
vs. Junction Temperature
Figure 4: Normalized DC Holding Current
vs. Junction Temperature
2.0
Ratio of IH / IH (TJ = 25°C)
Ratio of VGT / VGT (TJ = 25°C)
2.0
1.5
1.0
0.5
1.5
1.0
0.5
0.0
0.0
-40
-40
-15
10
35
60
85
110
-15
10
Figure 5: On-State Current
vs. On-State Voltage (Typical)
85
110
125
Figure 6: Power Dissipation (Typical)
vs. RMS On-State Current
8
32
28
24
20
16
12
8
4
7
8.0A SCRs
TJ = 25°C
Average On-State Power Dissipation
[PD(AV)] -- (Watts)
Instantaneous On-state Current (iT) – Amps
60
Junction Temperature (TJ) - (°C)
Junction Temperature (TJ) - (°C)
6
5
4
3
2
1
0
0
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
0
1.6
1
2
Instantaneous On-state Voltage (vT) – Volts
3
4
5
6
7
8
RMS On-State Current [IT(RMS)] - (Amps)
Figure 7: Maximum Allowable Case Temperature
vs. RMS On-State Current
Figure 8: Maximum Allowable Case Temperature
vs. Average On-State Current
130
130
Maximum Allowable Case Temperature
(TC) - °C
Sxx08R
Sxx08D
Sxx08V
125
Maximum Allowable Case
Temperature (TC) - °C
35
125
120
Sxx08RSy
Sxx08DSy
Sxx08VSy
115
110
Sxx08L
105
100
95
Sxx08LSy
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
Conduction Angle: 180°
FREE AIR RATING
90
85
Sxx08R
Sxx08D
Sxx08V
125
120
Sxx08RSy
Sxx08DSy
Sxx08VSy
115
110
Sxx08L
105
100
95
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
Conduction Angle: 180°
FREE AIR RATING
90
85
Sx08LSy
80
80
0
1
2
3
4
5
6
7
8
0
9
RMS On-State Current [IT(RMS)] - Amps
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
1
2
3
4
5
Average On-State Current [IT(AVE)] - Amps
233
Revised: July 29, 2010 09:54 AM
Sxx08xSx & Sxx08x Series
Teccor® brand Thyristors
8 Amp Sensitive & Standard SCRs
Figure 10: Maximum Allowable Ambient Temperature
vs. Average On-State Current
120
120
Maximum Allowable Ambient Temperature
(TA) - °C
Maximum Allowable Ambient Temperature
(TA) - °C
Figure 9: Maximum Allowable Ambient Temperature
vs. RMS On-State Current
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
Sxx08R
100
100
Sxx08L
80
Sxx08RSy
Sxx08LSy
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
Sxx08R
Sxx08V
60
40
Sxx08VSy
20
0
Sxx08L
80
Sxx08R
Sxx08RSy
60 Sxx08LSy
40
Sxx08VSy
20
0
0.0
0.5
1.0
1.5
2.0
2.5
0.0
0.5
1.0
1.5
Average On-State Current [IT(AVE)] - Amps
RMS On-State Current [IT(RMS)] - Amps
Note: xx = voltage, y = sensitivity
Figure 11: Peak Capacitor Discharge Current
Figure 12: Peak Capacitor Discharge Current Derating
1.2
1.0
Normalized Peak Current
Peak Discharge Current (ITM) - Amps
1000
100
ITRM
0.8
0.6
0.4
Sensitive SCR
Standard SCR
0.2
tW
10
0.5 1 . 0
1 0 .0
0.0
50.0
0
Pulse Current Duration (tw) - ms
25
50
75
100
125
150
Case Temperature (TC) - °C
Figure 13: Surge Peak On-State Current vs. Number of Cycles
Peak Surge (Non-repetitive)On-state
Current (ITSM) – Amps
100
4611-:'3&26&/$:)[4JOVTPJEBM
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated
Value at Specified Case Temperature
Notes:
(BUFDPOUSPMNBZCFMPTUEVSJOHBOEJNNFEJBUFMZ
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state
rated value.
10
1
1
10
100
1000
Surge Current Duration -- Full Cycles
Sxx08xSx & Sxx08x Series
234
Revised: July 29, 2010 09:54 AM
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
8 Amp Sensitive & Standard SCRs
Soldering Parameters
1Co'SFFBTTFNCMZ
tP
TP
Pre Heat
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
oTFDT
Average ramp up rate (Liquidus Temp)
(TL) to peak
5°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
oTFDPOET
+0/-5
Temperature
- Temperature Min (Ts(min))
tL
TS(max)
Preheat
TS(min)
260
Time within 5°C of actual peak
Temperature (tp)
oTFDPOET
Ramp-down Rate
5°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
280°C
tS
time to peak temperature
Environmental Specifications
Test
100% Matte Tin-plated
AC Blocking
Lead Material
6-SFDPHOJ[FEFQPYZNFFUJOHnBNNBCJMJUZ
classification 94V-0
Temperature Cycling
Copper Alloy
Temperature/
Humidity
Design Considerations
High Temp Storage
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
UPXBSEFYUFOEJOHUIFPQFSBUJOHMJGFPGUIF5IZSJTUPS(PPE
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
Low-Temp Storage
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Time
°C
Physical Specifications
Body Material
Ramp-do
Ramp-down
25
Peak Temperature (TP)
Terminal Finish
Ramp-up
TL
Thermal Shock
Autoclave
Specifications and Conditions
MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 125°C for 1008 hours
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C; 15-min
dwell-time
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C; 85%
rel humidity
MIL-STD-750, M-1031,
1008 hours; 150°C
1008 hours; -40°C
MIL-STD-750, M-1056
10 cycles; 0°C to 100°C; 5-min dwelltime at each temperature; 10 sec (max)
transfer time between temperature
EIA / JEDEC, JESD22-A102
168 hours (121°C at 2 ATMs) and
3)
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability
ANSI/J-STD-002, category 3, Test A
Lead Bend
MIL-STD-750, M-2036 Cond E
235
Revised: July 29, 2010 09:54 AM
Sxx08xSx & Sxx08x Series
8.0A SCRs
Reflow Condition
Teccor® brand Thyristors
8 Amp Sensitive & Standard SCRs
Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead
AREA (REF.) 0.17 IN2
TC MEASURING POINT
O
A
E
Dimension
8.13
.320
P
ANODE
B
C
13.36
.526
D
7.01
.276
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
F
R
G
L
H
CATHODE
ANODE GATE
N
K
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
M
J
Inches
Millimeters
Min
Max
Min
Max
A
0.380
0.420
9.65
10.67
B
0.105
0.115
2.67
2.92
C
0.230
0.250
5.84
6.35
D
0.590
0.620
14.99
15.75
E
0.142
0.147
3.61
3.73
F
0.110
0.130
2.79
3.30
(
0.540
0.575
13.72
14.61
)
0.025
0.035
0.64
0.89
J
0.195
0.205
4.95
5.21
,
0.095
0.105
2.41
2.67
L
0.060
0.075
1.52
1.91
M
0.085
0.095
2.16
2.41
N
0.018
0.024
0.46
0.61
O
0.178
0.188
4.52
4.78
P
0.045
0.060
1.14
1.52
R
0.038
0.048
0.97
1.22
Min
Max
Min
Max
A
0.380
0.420
9.65
10.67
B
0.105
0.115
2.67
2.92
Dimensions — TO-220AB (L-Package) — Isolated Mounting Tab
AREA (REF.) 0.17 IN2
TC MEASURING POINT
O
A
E
P
Dimension
8.13
.320
B
C
13.36
.526
D
7.01
.276
F
Inches
Millimeters
C
0.230
0.250
5.84
6.35
D
0.590
0.620
14.99
15.75
E
0.142
0.147
3.61
3.73
F
0.110
0.130
2.79
3.30
(
0.540
0.575
13.72
14.61
)
0.025
0.035
0.64
0.89
R
G
L
H
CATHODE
ANODE GATE
K
J
Sxx08xSx & Sxx08x Series
N
M
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
J
0.195
0.205
4.95
5.21
,
0.095
0.105
2.41
2.67
L
0.060
0.075
1.52
1.91
M
0.085
0.095
2.16
2.41
N
0.018
0.024
0.46
0.61
O
0.178
0.188
4.52
4.78
P
0.045
0.060
1.14
1.52
R
0.038
0.048
0.97
1.22
236
Revised: July 29, 2010 09:54 AM
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
8 Amp Sensitive & Standard SCRs
Dimensions — TO-251AA (V/I-Package) — V/I-PAK Through Hole
Dimension
E
Anode
H
D
5.28
.208
J
A
5.34
.210
B
R
P
Q
S
K
C
Cathode
Anode
GATE
L
F
G
I
Inches
Millimeters
Min
Typ
Max
Min
Typ
Max
A
0.040
0.044
0.050
1.02
1.11
1.27
B
0.235
0.242
0.245
5.97
6.15
6.22
C
0.350
0.361
0.375
8.89
9.18
9.53
D
0.205
0.208
0.213
5.21
5.29
5.41
E
0.255
0.262
0.265
6.48
6.66
6.73
F
0.027
0.031
0.033
0.69
0.80
0.84
(
0.087
0.090
0.093
2.21
2.28
2.36
)
0.085
0.092
0.095
2.16
2.34
2.41
I
0.176
0.180
0.184
4.47
4.57
4.67
J
0.018
0.020
0.023
0.46
0.51
0.58
,
0.038
0.040
0.044
0.97
1.01
1.12
L
0.018
0.020
0.023
0.46
0.52
0.58
P
0.042
0.047
0.052
1.06
1.20
1.32
Q
0.034
0.039
0.044
0.86
1.00
1.11
R
0.034
0.039
0.044
0.86
1.00
1.11
S
0.074
0.079
0.084
1.86
2.00
2.11
Dimensions — TO-252AA (D-Package) — D-PAK Surface Mount
Anode
E
D
6.71
.264
5.28
.208
TC MEASURING POINT
Dimension
A
6.71
.264
5.34
.210
B
C
P
Q
Cathode
GATE
F
Anode
1.60
.063
1.80
.071
AREA : 0.040 IN2
3
.118
G
4.60
.181
I
O
L
K
J
Inches
Millimeters
Min
Typ
Max
Min
Typ
Max
A
0.040
0.043
0.050
1.02
1.09
1.27
B
0.235
0.243
0.245
5.97
6.16
6.22
C
0.106
0.108
0.113
2.69
2.74
2.87
D
0.205
0.208
0.213
5.21
5.29
5.41
E
0.255
0.262
0.265
6.48
6.65
6.73
F
0.027
0.031
0.033
0.69
0.80
0.84
(
0.087
0.090
0.093
2.21
2.28
2.36
)
0.085
0.092
0.095
2.16
2.33
2.41
I
0.176
0.179
0.184
4.47
4.55
4.67
H
M
N
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
J
0.018
0.020
0.023
0.46
0.51
0.58
,
0.038
0.040
0.044
0.97
1.02
1.12
L
0.018
0.020
0.023
0.46
0.51
0.58
M
0.000
0.000
0.004
0.00
0.00
0.10
N
0.021
0.026
0.027
0.53
0.67
0.69
O
0°
0°
5°
0°
0°
5°
P
0.042
0.047
0.052
1.06
1.20
1.32
Q
0.034
0.039
0.044
0.86
1.00
1.11
237
Revised: July 29, 2010 09:54 AM
Sxx08xSx & Sxx08x Series
8.0A SCRs
AREA: 0.040 IN2
TC MEASURING POINT
Teccor® brand Thyristors
8 Amp Sensitive & Standard SCRs
Product Selector
Part Number
Voltage
Gate Sensitivity
Type
Package
X
0.2mA
Sensitive SCR
TO-220R
X
X
0.2mA
Sensitive SCR
TO-220L
X
X
0.2mA
Sensitive SCR
TO-251
Sxx08DS2
X
X
0.2mA
Sensitive SCR
TO-252
Sxx08RS3
X
X
0.5mA
Sensitive SCR
TO-220R
Sxx08LS3
X
X
0.5mA
Sensitive SCR
TO-220L
Sxx08VS3
X
X
0.5mA
Sensitive SCR
TO-251
Sxx08DS3
X
X
0.5mA
Sensitive SCR
TO-252
Sxx08R
X
X
X
X
15mA
Standard SCR
TO-220R
Sxx08L
X
X
X
X
15mA
Standard SCR
TO-220L
Sxx08V
X
X
X
X
15mA
Standard SCR
TO-251
Sxx08D
X
X
X
X
15mA
Standard SCR
TO-252
400V
600V
Sxx08RS2
X
Sxx08LS2
Sxx08VS2
800V
1000V
Note: xx = Voltage
Packing Options
Part Number
Marking
Weight
Packing Mode
Base Quantity
Sxx08L/Ryy
Sxx08L/Ryy
2.2 g
Bulk
500
Sxx08L/RyyTP
Sxx08L/Ryy
2.2 g
Tube
500 (50 per tube)
Sxx08DyyTP
Sxx08Dyy
0.3 g
Tube
750 (75 per tube)
Sxx08DyyRP
Sxx08Dyy
0.3 g
Embossed Carrier
2500
Sxx08VyyTP
Sxx08Vyy
0.4 g
Tube
750 (75 per tube)
Sxx08L/R
Sxx08L/R
2.2 g
Bulk
500
Sxx08L/RTP
Sxx08L/R
2.2 g
Tube
500 (50 per tube)
Sxx08DTP
Sxx08D
0.3 g
Tube
750 (75 per tube)
Sxx08DRP
Sxx08D
0.3 g
Embossed Carrier
2500
Sxx08VTP
Sxx08V
0.4 g
Tube
750 (75 per tube)
Note: xx = Voltage; yy = Sensitivity
Sxx08xSx & Sxx08x Series
238
Revised: July 29, 2010 09:54 AM
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
8 Amp Sensitive & Standard SCRs
TO-252 Embossed Carrier Reel Pack (RP) Specifications
Meets all EIA-481-2 Standards
* Cover tape
0.315
(8.0)
Cathode
XXXXXX
DC
XX
0.059
DIA
(1.5)
XXXXXX
DC
XX
XXXXXX
*
Gate
DC
0.524
(13.3)
XXXXXX
0.63
(16.0)
XX
0.157
(4.0)
Anode
12.99
(330.0)
0.512 (13.0)
Arbor Hole
Diameter
Dimensions
are in inches
(and millimeters).
0.64
(16.3)
Part Numbering System
8.0A SCRs
Direction of Feed
Part Marking System
S 60 08 L S2 56
TO-220AB (R and L Packages)
DEVICE TYPE
S: SCR
TO-251AA – (V Package)
TO-252AA – (D Package)
LEAD FORM DIMENSIONS
xx: Lead Form Option
®
yxxxx
®
yxxxx
CURRENT RATING
08: 8A
SENSITIVITY & TYPE
Sensitive SCR:
S2: 200μA
S3: 500μA
Standard SCR:
(blank): 15mA
S6008DS2
S6008RS2
VOLTAGE RATING
40: 400V
60: 600V
80: 800V
K0: 1000V
PACKAGE TYPE
L: TO-220 Isolated
R: TO-220 Non-Isolated
V: TO-251 (V/I-Pak)
D: TO-252 (D-Pak)
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
239
Revised: July 29, 2010 09:54 AM
Sxx08xSx & Sxx08x Series