Teccor® brand Thyristors 10 Amp Sensitive & Standard SCRs Sxx10xSx & Sxx10x Series ® Description Excellent unidirectional switches for phase control and general switching applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with microAmps of current as furnished by sense coils, proximity switches, and microprocessors. Standard phase control SCRs are triggered with few milliamperes of current at less than 1.5V potential. Features & Benefits • RoHS compliant • Glass – passivated junctions Agency Approval Agency Agency File Number Typical applications are capacitive discharge systems for strobe lights, nailers, staplers and gas engine ignition. Also controls for power tools, home/brown goods and white goods appliances. Main Features Symbol IT(RMS) VDRM /VRRM IGT • Surge capability up to 100 A Applications TO-220L Package : E71639 ® • Voltage capability up to 1000 V Value Unit 10 A 400 to 1000 V 0.2 to 15 mA Internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage. Schematic Symbol A K G Sxx10xSx & Sxx10x Series 1 Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors 10 Amp Sensitive & Standard SCRs Absolute Maximum Ratings — Sensitive SCRs Symbol Parameter IT(RMS) IT(AV) Test Conditions Sxx10LSy TC = 80°C RMS on-state current Sxx10RSy Sxx10DSy Sxx10VSy TC = 95°C Sxx10LSy TC = 80°C Average on-state current Sxx10RSy Sxx10DSy Sxx10VSy TC = 95°C Value Unit 10 A 6.4 A single half cycle; f = 50Hz; TJ (initial) = 25°C 83 single half cycle; f = 60Hz; TJ (initial) = 25°C 100 ITSM Peak non-repetitive surge current I 2t I2t Value for fusing tp = 8.3 ms 41 A2s Critical rate of rise of on-state current f = 60 Hz ; TJ = 110°C 100 A/μs Peak gate current TJ = 110°C 1 A Average gate power dissipation TJ = 110°C di/dt IGM PG(AV) 0.1 W Storage temperature range -40 to 150 °C Operating junction temperature range -40 to 110 °C Value Unit 10 A 6.4 A Tstg TJ A Note: xx = voltage, y = sensitivity Absolute Maximum Ratings — Standard SCRs Symbol IT(RMS) Parameter Test Conditions RMS on-state current Sxx10L TC = 95°C Sxx10R Sxx10D Sxx10V TC = 105°C Sxx10L TC = 95°C Sxx10R Sxx10D TC = 105°C Sxx10V single half cycle; f = 50Hz; TJ (initial) = 25°C single half cycle; f = 60Hz; TJ (initial) = 25°C IT(AV) Average on-state current ITSM Peak non-repetitive surge current I2t I2t Value for fusing tp = 8.3 ms 41 A2s Critical rate-of-rise of on-state current f = 60 Hz TJ = 125°C 100 A/μs Peak gate current TJ = 125°C 2 A Average gate power dissipation TJ = 125°C 0.5 W Storage temperature range -40 to 150 °C Operating junction temperature range -40 to 125 °C di/dt IGM PG(AV) Tstg TJ 83 A 100 Note: xx = voltage Sxx10xSx & Sxx10x Series 2 Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors 10 Amp Sensitive & Standard SCRs Electrical Characteristics (TJ = 25°C, unless otherwise specified) – Sensitive SCRs Symbol IGT VGT Value Test Conditions Sxx10xS2 MAX. VD = 6V RL = 100 Ω Sxx10xS3 200 MAX. 500 Unit μA 0.8 V dv/dt VD = VDRM; RGK = 1kΩ ; TJ = 110°C TYP. 8 V/μs VGD VD = VDRM; RL = 3.3 kΩ; TJ = 110°C MIN. 0.2 V VGRM IGR = 10μA MIN. 6 IH IT = 20mA (initial) MAX. 6 8 mA tq (1) MAX. 50 45 μs tgt IG = 2 x IGT; PW = 15µs; IT = 12A TYP. 4 5 μs V NOTE: xx = voltage, x = package (1) IT=2A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs Electrical Characteristics (TJ = 25°C, unless otherwise specified) – Standard SCRs Symbol IGT VGT Value Test Conditions Sxx10x MAX. VD = 12V RL = 60 Ω MAX. VD = VDRM; gate open; TJ = 100°C dv/dt IH tq tgt 1.5 V 600V 300 250 MIN. 400V VGD mA 350 1000V VD = VDRM; gate open; TJ = 125°C 15 400V 800V Unit 100 V/μs 250 600V 225 800V 200 VD = VDRM; RL = 3.3 kΩ; TJ = 125°C MIN. 0.2 V IT = 200mA (initial) MAX. 30 mA (1) MAX. 35 μs TYP. 2 μs IG = 2 x IGT; PW = 15µs; IT = 20A NOTE: xx = voltage, x = package (1) IT=2A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs Static Characteristics Symbol Test Conditions IT = 20A; tp = 380 µs VTM Sxx10xyy IDRM / IRRM Sxx10x Unit 1.6 V TJ = 25°C 400 - 600V 5 TJ = 110°C 400 - 600V 250 400 - 800V 10 TJ = 25°C VDRM / VRRM MAX. Value TJ = 100°C TJ = 125°C MAX. 1000V 20 400 - 800V 200 1000V 3000 400 - 800V 500 Note: xx = voltage, x = package, yy = sensitivity Sxx10xSx & Sxx10x Series 3 Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. μA Teccor® brand Thyristors 10 Amp Sensitive & Standard SCRs Thermal Resistances Symbol Parameter Value Junction to case (AC) Rθ(J-C) Junction to ambient Rθ(J-A) Sxx10RSy 1.6 Sxx10LSy 3.0 Sxx10VSy 1.7 Sxx10DSy 1.45 Sxx10R 1.6 Sxx10L 3.0 Sxx10V 1.7 Sxx10D 1.45 Sxx10RSy 40 Sxx10LSy 65 Sxx10VSy 85 Sxx10R 40 Sxx10L 50 Sxx10V 70 Unit °C/W °C/W Note: xx = voltage, y = sensitivity Figure 1: Normalized DC Gate Trigger Current vs. Junction Temperature (Sensitive SCR) Figure 2: Normalized DC Gate Trigger Current vs. Junction Temperature (Standard SCR) 4.0 Ratio of IGT / IGT (TJ = 25°C) Ratio of IGT / IGT (TJ = 25°C) 4.0 3.0 2.0 1.0 0.0 -40 -15 10 35 60 85 110 Junction Temperature (TJ) -- (°C) Sxx10xSx & Sxx10x Series 3.0 2.0 1.0 0.0 -40 -15 10 35 60 85 110 Junction Temperature (TJ) -- (°C) 4 Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 125 Teccor® brand Thyristors 10 Amp Sensitive & Standard SCRs Figure 3: Normalized DC Gate Trigger Voltage vs. Junction Temperature Figure 4: Normalized DC Holding Current vs. Junction Temperature 2.0 Ratio of IH / IH (TJ = 25°C) Ratio of VGT / VGT (TJ = 25°C) 2.0 1.5 1.0 0.5 0.0 1.5 1.0 0.5 0.0 -40 -15 10 35 60 85 110 125 -40 -15 10 Junction Temperature (TJ) -- (°C) Figure 5: On-State Current vs. On-State Voltage (Typical) 85 110 125 9 10 10 Average On-State Power Dissipation [PD(AV)] -- (Watts) TJ = 25ºC Instantaneous On-state Current (iT) – Amps 60 Figure 6: Power Dissipation (Typical) vs. RMS On-State Current 32 28 24 20 16 12 8 4 0 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 9 8 7 6 5 4 3 2 1 0 1.6 0 1 2 Instantaneous On-state Voltage (vT) – Volts 3 4 5 6 7 8 RMS On-State Current [IT(RMS)] -- (Amps) Figure 7: Maximum Allowable Case Temperature vs. RMS On-State Current Figure 8: Maximum Allowable Case Temperature vs. Average On-State Current 130 130 125 125 120 Sxx10L 115 120 Sxx10R Sxx10D Sxx10V Maximum Allowable Case Temperature (TC) - °C Maximum Allowable Case Temperature (TC) - °C 35 Junction Temperature (TJ) -- (°C) 110 105 100 Sxx10RSy Sxx10DSy Sxx10VSy 95 90 Sxx10LSy 85 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° FREE AIR RATING 80 75 115 Sxx10R Sxx10D Sxx10V 5 6 110 105 100 Sxx10RSy Sxx10DSy Sxx10VSy 95 90 Sxx10LSy 85 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° FREE AIR RATING 80 75 70 Sxx10L 70 0 1 2 3 4 5 6 7 8 9 10 11 RMS On-State Current [IT(RMS)] - Amps Sxx10xSx & Sxx10x Series 0 1 2 3 4 Average On-State Current [IT(AVE)] - Amps 5 Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 7 Teccor® brand Thyristors 10 Amp Sensitive & Standard SCRs Figure 9: Maximum Allowable Ambient Temperature vs. RMS On-State Current Figure 10: Maximum Allowable Ambient Temperature vs. Average On-State Current 120 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° FREE AIR RATING Sxx10R 100 Maximum Allowable Ambient Temperature (TA) - °C Maximum Allowable Case Temperature (TC) - °C 120 Sxx10L 80 Sxx10V Sxx10RSy Sxx10LSy 60 40 Sxx10VSy 20 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° FREE AIR RATING Sxx10R 100 Sxx10L 80 Sxx10RSy Sxx10LSy 60 Sxx10V 40 Sxx10VSy 20 0 0 0.0 0.5 1.0 1.5 0.0 2.5 2.0 0.5 Average On-State Current [IT(RMS)] - Amps 1.0 1.5 Average On-State Current [IT(AVE)] - Amps Note: xx = voltage, y = sensitivity Figure 11: Peak Capacitor Discharge Current Figure 12: Peak Capacitor Discharge Current Derating 1.2 1.0 Normalized Peak Current Peak Discharge Current (ITM) - Amps 1000 100 ITRM 0.8 0.6 0.4 Sensitive SCR Standard SCR 0.2 tW 10 0.5 0.0 10.0 1.0 0 50.0 Pulse Current Duration (tW) - ms 25 50 75 100 125 Case Temperature (TC) - °C Figure 13: Surge Peak On-State Current vs. Number of Cycles Peak Surge (Non-repetitive) On-state Current (ITSM) – Amps 1000 SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [IT(RMS)]: Maximum Rated Value at Specified Case Temperature Notes: 1. Gate control may be lost during and immediately following surge current interval. 2. Overload may not be repeated until junction temperature has returned to steady-state rated value. 100 10 1 1 10 100 1000 Surge Current Duration -- Full Cycles Sxx10xSx & Sxx10x Series 6 Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 150 Teccor® brand Thyristors 10 Amp Sensitive & Standard SCRs Soldering Parameters Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C Physical Specifications Ramp-up TL tL TS(max) Preheat TS(min) 25 Peak Temperature (TP) tP TP Temperature Reflow Condition tS time to peak temperature Time Environmental Specifications Test Terminal Finish 100% Matte Tin-plated Body Material UL recognized epoxy meeting flammability classification 94V-0 Lead Material Copper Alloy AC Blocking Temperature Cycling Temperature/ Humidity Design Considerations High Temp Storage Careful selection of the correct device for the application’s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Low-Temp Storage Sxx10xSx & Sxx10x Series Ramp-do Ramp-down 7 Revised: June 24, 2011 04:57 PM Thermal Shock Autoclave Specifications and Conditions MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 125°C for 1008 hours MIL-STD-750, M-1051, 100 cycles; -40°C to +150°C; 15-min dwell-time EIA / JEDEC, JESD22-A101 1008 hours; 320V - DC: 85°C; 85% rel humidity MIL-STD-750, M-1031, 1008 hours; 150°C 1008 hours; -40°C MIL-STD-750, M-1056 10 cycles; 0°C to 100°C; 5-min dwelltime at each temperature; 10 sec (max) transfer time between temperature EIA / JEDEC, JESD22-A102 168 hours (121°C at 2 ATMs) and 100% R/H Resistance to Solder Heat MIL-STD-750 Method 2031 Solderability ANSI/J-STD-002, category 3, Test A Lead Bend MIL-STD-750, M-2036 Cond E ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors 10 Amp Sensitive & Standard SCRs Product Selector Voltage Part Number 400V 600V X X Sxx10RS2 800V 1000V Gate Sensitivity Type Package 0.2mA Sensitive SCR TO-220R Sxx10LS2 X X 0.2mA Sensitive SCR TO-220L Sxx10VS2 X X 0.2mA Sensitive SCR TO-251 Sxx10DS2 X X 0.2mA Sensitive SCR TO-252 Sxx10RS3 X X 0.5mA Sensitive SCR TO-220R Sxx10LS3 X X 0.5mA Sensitive SCR TO-220L Sxx10VS3 X X 0.5mA Sensitive SCR TO-251 0.5mA Sensitive SCR TO-252 15mA Standard SCR TO-220R Sxx10DS3 X X Sxx10R X X X X Sxx10L X X X X 15mA Standard SCR TO-220L Sxx10V X X X X 15mA Standard SCR TO-251 Sxx10D X X X X 15mA Standard SCR TO-252 Note: xx = Voltage Dimensions — TO-251AA (V/I-Package) — V/I-PAK Through Hole TC MEASURING POINT Anode E H D AREA: 0.040 IN2 Dimension 5.28 .208 J A 5.34 .210 B R P Q S K C Cathode Anode GATE Sxx10xSx & Sxx10x Series F L G I 8 Revised: June 24, 2011 04:57 PM Inches Millimeters Min Typ Max Min Typ Max A 0.040 0.044 0.050 1.02 1.11 1.27 B 0.235 0.242 0.245 5.97 6.15 6.22 C 0.350 0.361 0.375 8.89 9.18 9.53 D 0.205 0.208 0.213 5.21 5.29 5.41 E 0.255 0.262 0.265 6.48 6.66 6.73 F 0.027 0.031 0.033 0.69 0.80 0.84 G 0.087 0.090 0.093 2.21 2.28 2.36 H 0.085 0.092 0.095 2.16 2.34 2.41 I 0.176 0.180 0.184 4.47 4.57 4.67 J 0.018 0.020 0.023 0.46 0.51 0.58 K 0.038 0.040 0.044 0.97 1.01 1.12 L 0.018 0.020 0.023 0.46 0.52 0.58 P 0.042 0.047 0.052 1.06 1.20 1.32 Q 0.034 0.039 0.044 0.86 1.00 1.11 R 0.034 0.039 0.044 0.86 1.00 1.11 S 0.074 0.079 0.084 1.86 2.00 2.11 ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors 10 Amp Sensitive & Standard SCRs Dimensions — TO-252AA (D-Package) — D-PAK Surface Mount Anode E D 6.71 .264 5.28 .208 TC MEASURING POINT Dimension 6.71 .264 B C P Q Cathode GATE F Anode 1.60 .063 1.80 .071 AREA : 0.040 IN2 3 .118 G 4.60 .181 I O L K J H M N Sxx10xSx & Sxx10x Series 9 Revised: June 24, 2011 04:57 PM Millimeters Min Typ Max Min Typ Max A 0.040 0.043 0.050 1.02 1.09 1.27 B 0.235 0.243 0.245 5.97 6.16 6.22 C 0.106 0.108 0.113 2.69 2.74 2.87 A 5.34 .210 Inches D 0.205 0.208 0.213 5.21 5.29 5.41 E 0.255 0.262 0.265 6.48 6.65 6.73 F 0.027 0.031 0.033 0.69 0.80 0.84 G 0.087 0.090 0.093 2.21 2.28 2.36 H 0.085 0.092 0.095 2.16 2.33 2.41 I 0.176 0.179 0.184 4.47 4.55 4.67 J 0.018 0.020 0.023 0.46 0.51 0.58 K 0.038 0.040 0.044 0.97 1.02 1.12 L 0.018 0.020 0.023 0.46 0.51 0.58 M 0.000 0.000 0.004 0.00 0.00 0.10 N 0.021 0.026 0.027 0.53 0.67 0.69 O 0° 0° 5° 0° 0° 5° P 0.042 0.047 0.052 1.06 1.20 1.32 Q 0.034 0.039 0.044 0.86 1.00 1.11 ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors 10 Amp Sensitive & Standard SCRs Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead TC MEASURING POINT AREA (REF.) 0.17 IN2 O A E Dimension 8.13 .320 P ANODE B C 13.36 .526 D 7.01 .276 NOTCH IN GATE LEAD TO ID. NON-ISOLATED TAB F R G L H CATHODE ANODE GATE K N Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). M J Inches Millimeters Min Max Min Max A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 Min Max Min Max Dimensions — TO-220AB (L-Package) — Isolated Mounting Tab TC MEASURING POINT O A E P AREA (REF.) 0.17 IN2 Dimension 8.13 .320 B C 13.36 .526 D 7.01 .276 F R G L H CATHODE ANODE GATE K J Sxx10xSx & Sxx10x Series N M Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). 10 Revised: June 24, 2011 04:57 PM Inches Millimeters A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors 10 Amp Sensitive & Standard SCRs Packing Options Part Number Marking Weight Packing Mode Base Quantity Sxx10L/Ryy Sxx10L/Ryy 2.2 g Bulk 500 Sxx10L/RyyTP Sxx10L/Ryy 2.2 g Tube 500 (50 per tube) Sxx10DyyTP Sxx10Dyy 0.3 g Tube 750 (75 per tube) Sxx10DyyRP Sxx10Dyy 0.3 g Embossed Carrier 2500 Sxx10VyyTP Sxx10Vyy 0.4 g Tube 750 (75 per tube) Sxx10L/R Sxx10L/R 2.2 g Bulk 500 Sxx10L/RTP Sxx10L/R 2.2 g Tube 500 (50 per tube) Sxx10DTP Sxx10D 0.3 g Tube 750 (75 per tube) Sxx10DRP Sxx10D 0.3 g Embossed Carrier 2500 Sxx10VTP Sxx10V 0.4 g Tube 750 (75 per tube) Note: xx = Voltage; yy = Sensitivity TO-252 Embossed Carrier Reel Pack (RP) Specifications 0.157 (4.0) * Cover tape 0.315 (8.0) Anode 12.99 (330.0) 0.512 (13.0) Arbor Hole Dia. DC XXXXXX DC XX XXXXXX DC * XX 0.524 (13.3) XXXXXX 0.63 (16.0) Cathode XXXXXX 0.059 Dia (1.5) Gate XX Meets all EIA-481-2 Standards Dimensions are in inches (and millimeters). 0.64 (16.3) Direction of Feed Part Numbering System Part Marking System S 60 10 L S2 56 Sxx10R YM ® CURRENT 10: 10A Sxx10xSx & Sxx10x Series SENSITIVITY & TYPE Sensitive SCR: S2: 200µA S3: 500µA Standard SCR: (blank): 15mA ® VOLTAGE RATING 40 : 400V 60 : 600V 80 : 800V K0 : 1000V PACKAGE TYPE L : TO-220 Isolated R : TO-220 Non-Isolated V : TO-251 (VPAK) D : TO-252 (DPAK) 11 Revised: June 24, 2011 04:57 PM Sxx10DS3 LEAD FORM DIMENSIONS xx : Lead Form Option YMLDD DEVICE TYPE S : SCR TO-251AA – (V Package) TO-252AA – (D Package ) Sxx10L MY ® ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information.