VISHAY 25TTS12FP

25TTS...FP High Voltage Series
Vishay High Power Products
Phase Control SCR
TO-220AB FULL-PAK, 25 A
DESCRIPTION/FEATURES
The 25TTS...FP High Voltage Series of silicon controlled
rectifiers are specifically designed for medium power
switching and phase control applications. The glass
passivation technology used has reliable operation up to
125 °C junction temperature.
2
(A)
TO-220AB FULL-PAK
Typical applications are in input rectification (soft start) and
these products are designed to be used with Vishay HPP
input diodes, switches and output rectifiers which are
available in identical package outlines.
1 (K) (G) 3
The fully isolated package (VINS = 2500 VRMS) is UL E78996
approved.
Plastic material 94VRo.
PRODUCT SUMMARY
VT at 16 A
< 1.25 V
ITSM
300 A
VRRM
800/1200 V
This product has been designed and qualified for industrial
level.
OUTPUT CURRENT IN TYPICAL APPLICATIONS
APPLICATIONS
SINGLE-PHASE BRIDGE
THREE-PHASE BRIDGE
UNITS
18
22
A
Capacitive input filter TA = 55 °C, TJ = 125 °C,
common heatsink of 1 °C/W
MAJOR RATINGS AND CHARACTERISTICS
PARAMETER
IT(AV)
TEST CONDITIONS
Sinusoidal waveform
IRMS
VALUES
16
25
VRRM/VDRM
800/1200
ITSM
UNITS
A
V
300
A
1.25
V
dV/dt
500
V/µs
dI/dt
150
A/µs
- 40 to 125
°C
VRRM, MAXIMUM PEAK
REVERSE VOLTAGE
V
VDRM, MAXIMUM PEAK
DIRECT VOLTAGE
V
IRRM/IDRM
AT 125 °C
mA
25TTS08FP
800
800
25TTS12FP
1200
1200
VT
16 A, TJ = 25 °C
TJ
VOLTAGE RATINGS
PART NUMBER
Document Number: 93703
Revision: 20-Jun-08
For technical questions, contact: [email protected]
10
www.vishay.com
1
25TTS...FP High Voltage Series
Vishay High Power Products
Phase Control SCR
TO-220AB FULL-PAK, 25 A
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
Maximum average on-state current
IT(AV)
Maximum RMS on-state current
IRMS
Maximum peak, one-cycle,
non-repetitive surge current
ITSM
TEST CONDITIONS
VALUES
TYP. MAX.
TC = 85 °C, 180° conduction half sine wave
UNITS
16
25
10 ms sine pulse, rated VRRM applied
300
10 ms sine pulse, no voltage reapplied
350
10 ms sine pulse, rated VRRM applied
450
10 ms sine pulse, no voltage reapplied
630
A
Maximum I2t for fusing
I2 t
Maximum I2√t for fusing
I2√t
t = 0.1 to 10 ms, no voltage reapplied
6300
Maximum on-state voltage drop
VTM
16 A, TJ = 25 °C
1.25
V
12.0
mΩ
1.0
V
On-state slope resistance
rt
Threshold voltage
VT(TO)
Maximum reverse and direct leakage current
IRM/IDM
TJ = 125 °C
TJ = 25 °C
TJ = 125 °C
IH
Anode supply = 6 V, resistive load, initial IT = 1 A
Maximum latching current
IL
Anode supply = 6 V, resistive load
A2√s
0.5
VR = Rated VRRM/VDRM
Holding current
A2s
10
-
100
mA
200
Maximum rate of rise of off-state voltage
dV/dt
500
V/µs
Maximum rate of rise of turned-on current
dI/dt
150
A/µs
VALUES
UNITS
TRIGGERING
PARAMETER
SYMBOL
Maximum peak gate power
TEST CONDITIONS
PGM
8.0
Maximum average gate power
PG(AV)
2.0
Maximum peak positive gate current
+ IGM
1.5
A
Maximum peak negative gate voltage
- VGM
10
V
Maximum required DC gate current to trigger
Maximum required DC gate
voltage to trigger
IGT
VGT
Maximum DC gate voltage not to trigger
VGD
Maximum DC gate current not to trigger
IGD
Anode supply = 6 V, resistive load, TJ = - 10 °C
60
Anode supply = 6 V, resistive load, TJ = 25 °C
45
Anode supply = 6 V, resistive load, TJ = 125 °C
20
Anode supply = 6 V, resistive load, TJ = - 10 °C
2.5
Anode supply = 6 V, resistive load, TJ = 25 °C
2.0
Anode supply = 6 V, resistive load, TJ = 125 °C
1.0
TJ = 125 °C, VDRM = Rated value
W
mA
V
0.25
2.0
mA
VALUES
UNITS
SWITCHING
PARAMETER
SYMBOL
Typical turn-on time
tgt
Typical reverse recovery time
trr
Typical turn-off time
tq
www.vishay.com
2
TEST CONDITIONS
TJ = 25 °C
TJ = 125 °C
For technical questions, contact: [email protected]
0.9
4
µs
110
Document Number: 93703
Revision: 20-Jun-08
25TTS...FP High Voltage Series
Phase Control SCR
Vishay High Power Products
TO-220AB FULL-PAK, 25 A
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
Maximum junction and storage
temperature range
TJ, TStg
Maximum thermal resistance,
junction to case
RthJC
Maximum thermal resistance,
junction to ambient
RthJA
Typical thermal resistance,
case to heatsink
RthCS
TEST CONDITIONS
DC operation
Marking device
Document Number: 93703
Revision: 20-Jun-08
UNITS
- 40 to 125
°C
1.5
°C/W
62
Mounting surface, smooth and greased
Approximate weight
Mounting torque
VALUES
1.5
2
g
0.07
oz.
minimum
6 (5)
maximum
12 (10)
kgf · cm
(lbf · in)
Case style TO-220AB FULL-PAK (94/V0)
For technical questions, contact: [email protected]
25TTS08FP
25TTS12FP
www.vishay.com
3
25TTS...FP High Voltage Series
Phase Control SCR
TO-220AB FULL-PAK, 25 A
Maximum Averag e On-state Power Loss (W)
130
25TTS.. Series
RthJC (DC) = 1.5 °C/ W
120
110
Conduc tion Angle
100
30°
90
60°
90°
120°
180°
80
70
0
5
10
15
DC
180°
120°
90°
60°
30°
30
25
20
RMSLimit
15
Conduc tion Period
10
25TTS.. Series
T J = 125°C
5
0
0
20
25
30
Fig. 4 - On-State Power Loss Characteristics
Peak Half Sine Wave On-state Current (A)
110
Conduc tion Period
100
90
30°
80
60°
90°
120°
180°
DC
70
5
10
15
20
25
30
350
At Any Rated Load Cond ition And With
Rated V RRM App lied Following Surge.
Initial TJ = 125°C
@60 Hz 0.0083 s
@50 Hz 0.0100 s
300
250
200
25TTS.. Series
150
1
10
100
Average On-state Current (A)
Number Of Equal Amplitude Half Cycle Current Pulses (N)
Fig. 2 - Current Rating Characteristics
Fig. 5 - Maximum Non-Repetitive Surge Current
25
400
180°
120°
90°
60°
30°
RMSLimit
10
Conduction Angle
25TTS.. Series
TJ= 125°C
5
0
0
15
Avera ge On-sta te Current (A)
120
15
10
Average On-state Current (A)
25TTS.. Series
R thJC (DC) = 1.5 °C/ W
20
5
Fig. 1 - Current Rating Characteristics
130
0
35
20
Peak Half Sine Wa ve On-state Current (A)
Maximum Average On-sta te Power Loss (W)
Maximum Allowable Case Temperature (°C)
Maximum Allowable Case Temperature (°C)
Vishay High Power Products
4
8
12
16
20
350
300
Maximum Non Repetitive Surge Current
Versus Pulse Train Duration. Control
Of Conduc tion Ma y Not Be Mainta ined.
Initia l TJ = 125°C
No Voltage Rea pp lied
Rated VRRM Reapp lied
250
200
150
25TTS.. Series
100
0.01
0.1
1
Avera ge On-state Current (A)
Pulse Train Duration (s)
Fig. 3 - On-State Power Loss Characteristics
Fig. 6 - Maximum Non-Repetitive Surge Current
www.vishay.com
4
For technical questions, contact: [email protected]
Document Number: 93703
Revision: 20-Jun-08
25TTS...FP High Voltage Series
Phase Control SCR
Vishay High Power Products
TO-220AB FULL-PAK, 25 A
Insta ntaneous On-state Current (A)
1000
100
TJ= 25°C
TJ= 125°C
10
25TTS.. Series
1
0
1
2
3
4
5
Instanta neous On-state Voltage (V)
Transient Thermal Impedance Z thJC (°C/W)
Fig. 7 - On-State Voltage Drop Characteristics
10
D = 0.50
D = 0.33
D = 0.25
D = 0.17
D = 0.08
1
Steady State Value
(DC Operation)
0.1
Single Pulse
25TTS.. Series
0.01
0.0001
0.001
0.01
0.1
1
10
Square Wave Pulse Duration (s)
Fig. 8 - Thermal Impedance ZthJC Characteristics
Rectangular gate pulse
a)Recommended load line for
rated di/ dt: 10 V, 20 ohms
tr = 0.5 µs, tp >= 6 µs
b)Rec ommended load line for
<= 30% rated d i/ dt: 10 V, 65 ohms
10
tr = 1 µs, tp >= 6 µs
(1) PGM = 40 W, tp = 1 ms
(2) PGM = 20 W, tp = 2 ms
(3) PGM = 8 W, tp = 5 ms
(4) PGM = 4 W, tp = 10 ms
(a)
(b)
VGD
IGD
0.1
0.001
TJ = -10 °C
TJ = 125 °C
1
TJ = 25 °C
Instantaneous Gate Voltage (V)
100
(4)
25TTS.. Series
0.01
0.1
(3)
(2)
(1)
Frequenc y Limited by PG(AV)
1
10
100
Instantaneous Gate Current (A)
Fig. 9 - Gate Characteristics
Document Number: 93703
Revision: 20-Jun-08
For technical questions, contact: [email protected]
www.vishay.com
5
25TTS...FP High Voltage Series
Vishay High Power Products
Phase Control SCR
TO-220AB FULL-PAK, 25 A
ORDERING INFORMATION TABLE
Device code
25
T
T
S
12
FP
-
1
2
3
4
5
6
7
1
-
Current rating (25 = 25 A)
2
-
Circuit configuration:
3
-
Package:
T = Single thyristor
T = TO-220AB
4
-
Type of silicon:
Standard recovery rectifier
5
-
Voltage code x 100 = VRRM
6
-
FULL-PAK
7
08 = 800 V
12 = 1200 V
- None = Standard production
PbF = Lead (Pb)-free
LINKS TO RELATED DOCUMENTS
Dimensions
http://www.vishay.com/doc?95072
Part marking information
http://www.vishay.com/doc?95069
www.vishay.com
6
For technical questions, contact: [email protected]
Document Number: 93703
Revision: 20-Jun-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1