Details

3.2 mm x 5.0 mm Ceramic Package SMD VCXO, TTL / HC-MOS
Applications:
Product Features:
Small Surface Mount Package
CMOS/TTL Compatible Logic Levels
Compatible with Leadfree Processing
SD/HD Video
Sonet /SDH
VoIP
T1/E1, T3/E3
Base Station
Frequency
77.760 MHz to 200.000 MHz
Output Level (HCMOS)
VOH = 90% VDD Min.
VOL = 10% VDD Max.
Duty Cycle
50% ±10% Std.(5% optional)
Rise / Fall Time
10.0 nS Max.
Output Load
15pF
Frequency Stability
See Table Below
Start-up Time
10 mS Max.
Supply Voltage
See Input Voltage Table, tolerance ±5 %
Control Voltage
1.25 VDC ±1.05 VDC for 2.5 VDC, 1.65 VDC ±1.35 VDC for
3.3 VDC, 2.5 VDC ±2.0 VDC for 5.0 VDC
Pull Range
±100 ppm min. (Std). See Table Below.
Current
50.0 mA Max.
Enable/Disable(Pin 2 or Pin 5)
70% VDD Min. / 30%VDD Max.
Linearity
10%
Aging
±5ppm/year Max. (±3ppm optional)
Phase Jitter (12kHz to 20kHz)
6.0 pS Max.
Period Jitter (PK-PK)
100pS Max.
Temperature
Operating
Storage
See Below
-55 C to +125 C
Part Number Guide
Package
I604 -
I604 Series
Operating
Temperature
Recommended Pad Layout
Pin Connection
1
V Control
2
E/D(N.C.)
3
GND
4
Output
5
N.C.(E/D)
6
VDD
Dimension Units: mm
Sample Part Number: I604-1BC3H2-77.760
Stability
Pullability
(in ppm)
Supply
Voltage
Enable / Disable
Frequency
- 77.760 MHz
1 = 0 C to +70 C
F = 20
B = 50 PPM Min.
5 = 5.0 VDC
H2 = Enable(pin 2)
2 = -40 C to +85 C
A = 25
C = 100 PPM Min.*
3 = 3.3 VDC
H5 = Enable(pin 5)
B = 50
K = 150 PPM Min.*
6 = 2.5 VDC
NOTE: A 0.01 µF bypass capacitor is recommended between Vcc (pin 6) and GND (pin 3) to minimize power supply noise. * Not available at all
voltages.
ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com
08/11
Specifications subject to change without notice
Page 1
I604 Series
3.2 mm x 5.0 mm Ceramic Package SMD VCXO, TTL / HC-MOS
Pb Free Solder Reflow Profile:
Typical Application:
*Units are backward compatible with 240C reflow processes
Package Information:
MSL = N.A. (package does not contain plastic, storage life is
unlimited under normal room conditions).
Termination = e4 (Au over Ni over W base metalization).
Tape and Reel Information:
Quantity per
Reel
A
B
C
D
E
F
1000
16 +/-.3
8 +/-.2
7.5 +/-.2
17.5 +/-1
50 / 60 / 80
180 / 250
Environmental Specifications
Thermal Shock
Moisture Resistance
Mechanical Shock
Mechanical Vibration
Resistance to Soldering Heat
Hazardous Substance
Solderability
Terminal Strength
Gross Leak
Fine Leak
Solvent Resistance
MIL-STD-883, Method 1011, Condition A
MIL-STD-883, Method 1004
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 2007, Condition A
J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max)
Pb-Free / RoHS / Green Compliant
JESD22-B102-D Method 2 (Preconditioning E)
MIL-STD-883, Method 2004, Test Condition D
MIL-STD-883, Method 1014, Condition C
MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s
MIL-STD-202, Method 215
Marking
Line 1: ILSI and Date Code
Line 2: Frequency
ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com
08/11
Specifications subject to change without notice
Page 2