WILLAS FM120-M+ FFM201LS THRU 2.0A SUFRACE MOUNT FAST RECOVERY RECTIFIERS-50-1000V THRU FM1200-M+ FFM207LS Pb Free Product 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V SMA-LS PACKAGE SOD-123+ PACKAGE Package outline Features • Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. SOD-123H • Low profile surface mounted application in order to SMA-LS optimize board space. Features • Low power loss, high efficiency. 0.146(3.7) 0.130(3.3) • High current capability, low forward voltage drop. High surge capability. process design, excellent power dissipation offers •• Batch for overvoltage protection. • Guardring better reverse leakagecurrent and thermal resistance. Ultraprofile high-speed switching. surface mounted application in order to • Low optimize board space. epitaxial planar chip, metal silicon junction. • Silicon current capability. •• High Lead-free parts meet environmental standards of • Fast switching for/228 high efficiency. MIL-STD-19500 RoHSsurge product for packing code suffix "G" • High current capability. Halogen free product forjunction. packing code suffix "H" • Glass passivated chip •Mechanical data code suffix "G" RoHS product for packing 0.012(0.3) Typ. 0.193(4.9) 0.177(4.5) 0.012(0.3) Typ. 0.071(1.8) 0.056(1.4) 0.106(2.7) 0.091(2.3) 0.040(1.0) free product forflame packing code suffix "H" 0.024(0.6) Epoxy : UL94-V0 rated retardant • Halogen • Moisture Sensitivity Level 1 0.071(1.8) • Case : Molded plastic, SOD-123H 0.055(1.4) 0.031(0.8) Typ. 0.031(0.8) Typ. Mechanical data , • Terminals :Plated terminals, solderable per MIL-STD-750 0.040(1.0) Typ. 0.040 (1.0) Typ. Method 2026 • Epoxy:UL94-V0 rated flame retardant Dimensions in inches and (millimeters) Polarity : Indicated by cathode band • Case : Molded plastic, JEDEC SMA-LS Mounting Position Any solderable per • Terminals : Solder :plated, Dimensions in inches and (millimeters) MIL-STD-750, • Weight : Approximated 0.011 Method gram 2026 • Polarity : Indicated by cathode band MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • Mounting Position : Any Ratings at 25℃ ambient temperature unless otherwise specified. • Weight : Approximated 0.05 gram Single phase half wave, 60Hz, resistive of inductive load. For capacitive load, derate current by 20% RATINGS Marking Code Maximum SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT 12 13 15 TA=25 oC unless otherwise noted) 14 20 30 40 50 Maximum Recurrent Peak Reverse Voltage VRRM PARAMETER CONDITIONS 14 21 28 35 Maximum RMS Voltage VRMS Forward rectified current See Fig.1 Maximum DC Blocking Voltage 20 30 40 50 VDC 8.3ms single half sine-wave superimposed on Forward surgeRectified currentCurrent Maximum Average Forward I O rate load (JEDEC methode) V R = V RRM T A = 25 OC Peak Forward Surge Current 8.3 ms single half sine-wave IFSM Reverse current superimposed on rated load (JEDEC method) V R = V RRM T A = 125 OC Typical Thermal Resistance (Note 2) RΘJA to ambient Thermal resistance Junction 16 60 Symbol 42 IO 60 I FSM 1.0 Operating Temperature Range ratings (AT reverse voltage CJ and applied 4V DC f=1MHz -55 to +125 TJ Typical Junction Capacitance (Note 1) Diode junction capacitance Storage temperature Storage Temperature Range TSTG 18 80 MIN. 56 10 100 TYP. 70 80 100 115 150 MAX. 105 2.0 150 50 120 200 UNIT 140 A 200 A 40 R èJA 120 CJ T STG - 65 to +175 100 35 40 -55 to +150 -65 Volts Amps 5.0 30 IR Volts Volts O uA Amps C/W ℃/W PF pF +175 O ℃ C ℃ CHARACTERISTICS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT VF Maximum Forward Voltage at 1.0A DC Maximum Average Reverse Current at *1 @T A=25℃ V *2 V SYMBOLS Rated DC Blocking Voltage NOTES: FFM201LS RRM RMS (V) @T A=125℃ (V) 50 35 *3 V IRR (V) *4 VF (V) FFM203LS 2- Thermal Resistance From Junction 200 to Ambient 140 2012-06 2012-1 T RR (nS) 0.70 Operating temperature T J, ( OC) 50 FFM202LS 100 voltage70 1- Measured at 1 MHZ and applied reverse of 4.0 VDC.100 0.50 *5 400 280 400 FFM205LS 600 420 600 FFM206LS 800 560 800 FFM207LS 1000 700 1000 1.30 -55 to +150 250 500 0.9 0.92 10 Volts mAmps *1 Repetitive peak reverse voltage *2 RMS voltage 150 200 FFM204LS 0.85 0.5 *3 Continuous reverse voltage *4 Maximum forward voltage@IF=2A *5 Reverse recovery time WILLAS ELECTRONIC CORP. WILLAS ELECTRONIC CORP. WILLAS FM120-M+ FFM201LS THRU 2.0A SUFRACE MOUNT FAST RECOVERY RECTIFIERS-50-1000V THRU FM1200-M+ FFM207LS Pb Free Product 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V SMA-LS PACKAGE SOD-123+ PACKAGE Rating and characteristic curves outline Package Features FIG.1-TYPICAL design, FORWARD excellent power dissipation offers • Batch process better reverse leakage current and thermal resistance. optimize board space. INSTANTANEOUS FORWARD CURRENT,(A) • Low power loss, high efficiency. • High current capability, low forward voltage drop. • High surge capability. for overvoltage protection. • Guardring 20 • Ultra high-speed switching. epitaxial planar chip, metal silicon junction. • Silicon 6.0 • Lead-free parts meet environmental standards of MIL-STD-19500 /228 2.0 product for packing code suffix "G" • RoHS AVERAGE FORWARD CURRENT,(A) CHARACTERISTICS mounted application in order to • Low profile surface Halogen free product for packing code suffix "H" Mechanical data FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE SOD-123H 2.4 0.146(3.7) 0.130(3.3) 2.0 1.6 Single Phase 1.2 0.071(1.8) 0.056(1.4) Half Wave 60Hz Resistive Or Inductive Load 0.8 0.4 0 0 20 40 TJ=25 C 60 80 100 1.8 2.0 FIG.3- TEST CIRCUIT DIAGRAM AND REVERSE PEAK FORWAARD SURGE CURRENT,(A) Method 2026 RECOVERY TIME CHARACTERISTICS Ratings at 50 25℃ ambient temperature unless otherwise specified. W 10W NONINDUCTIVE Single phase half wave, 60Hz, resistive of inductive load. For capacitive load, derate current by 20% RATINGS (+) D.U.T. Marking Code25Vdc (approx.) ( ) Maximum Recurrent Peak Reverse Voltage 1W NONINDUCTIVE Maximum RMS Voltage OSCILLISCOPE (NOTE 1) Maximum DC Blocking Voltage Maximum PULSE GENERATOR (NOTE 2) VRRM(+) 12 20 VRMS 14 VDC 20 IFSM 2. Rise Time= 10ns max., Source Impedance= 50 ohms. Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) RΘJA Typical Thermal Resistance (Note 2) trr Typical Junction Capacitance (Note 1) +0.5A Operating Temperature Range Storage Temperature Range 0 CJ | | | | | | | | TJ TSTG CHARACTERISTICS -0.25A VF Maximum Average Reverse Current at @T A=25℃ @T A=125℃ Rated DC Blocking Voltage -1.0A NOTES: 1cm SET TIME BASE FOR 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 50 / 10ns / cm 200 0.040(1.0) 0.024(0.6) Dimensions in inches and (millimeters) 40 30 8.3ms Single Half TJ=25 C Sine Wave 20 JEDEC method 10 130 30 14 40 15 50 21 28 35 30 40 1 16 60 5 18 80 10 100 42 56 60 80 10 NUMBER OF CYCLES AT 60Hz 50 115 100 150 120 200 Volts 70 105 140 Volts 100 150 200 Volts 50 FIG.5-TYPICAL JUNCTION CAPACITANCE 1.0 30 70 60 40 120 50 -55 to +125 Amps ℃/W PF -55 to +150 40 Amps ℃ - 65 to +175 ℃ 30 SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT Maximum Forward Voltage at 1.0A DC 180 50 NOTES: 1.Forward Rise Time= 7ns max., InputCurrent Impedance= 1 megohm.22pF.IO Average Rectified 160 SYMBOL ( ) FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT JUNCTION CAPACITANCE,(pF) 140 FIG.4-MAXIMUM NON-REPETITIVE FORWARD 0.031(0.8) Typ. 0.031(0.8) Typ. SURGE CURRENT MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS NONINDUCTIVE 120 AMBIENT TEMPERATURE ( C) Pulse Width 300us 1% Duty Cycle • Epoxy : UL94-V0 rated flame retardant 0.2 • Case : Molded plastic, SOD-123H , • Terminals :Plated terminals, solderable per MIL-STD-750 • Polarity .02 : Indicated by cathode band .6 Position .8 1.0: Any 1.2 1.4 1.6 • Mounting FORWARD VOLTAGE,(V) • Weight : Approximated 0.011 gram 0.012(0.3) Typ. IR 20 0.50 0.70 10 0 0.9 0.85 0.92 0.5 mAmps 10 .01 .05 .1 .5 1 Volts 5 10 50 100 REVERSE VOLTAGE,(V) 2- Thermal Resistance From Junction to Ambient 2012-06 2012-1 WILLAS ELECTRONIC CORP. WILLAS ELECTRONIC CORP. WILLAS FM120-M+ FFM201LS THRU 2.0A SUFRACE MOUNT FAST RECOVERY RECTIFIERS-50-1000V THRU FM1200-M+ FFM207LS Pb Free Product 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V SMA-LS PACKAGE SOD-123+ PACKAGE Package outline Features Pinning information • Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. Pin mounted application in order to • Low profile surface optimize board space. • Low power loss, high efficiency. Pin1 current cathode capability, low forward voltage drop. • High 1 surge capability. • High Pin2 anode • Guardring for overvoltage protection. • Ultra high-speed switching. • Silicon epitaxial planar chip, metal silicon junction. • Lead-free parts meet environmental standards of MIL-STD-19500 /228 • RoHS product for packing code suffix "G" Marking Halogen free product for packing code suffix "H" Mechanical data Type number SOD-123H Simplified outline Symbol 0.146(3.7) 0.130(3.3) 2 0.012(0.3) Typ. 1 2 0.071(1.8) 0.056(1.4) Marking code • Epoxy : UL94-V0 rated flame retardant Molded plastic, SOD-123H • Case :FFM201LS , FFM202LS • Terminals :Plated terminals, solderable per MIL-STD-750 F21 F22 F23 F24 F25 F26 F27 FFM203LS Method 2026 FFM204LS • Polarity : Indicated by cathode band FFM205LS Position : Any • Mounting • WeightFFM206LS : Approximated 0.011 gram FFM207LS 0.040(1.0) 0.024(0.6) 0.031(0.8) Typ. 0.031(0.8) Typ. Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive of inductive load. For capacitive load, derate current by 20% Suggested solder pad layout RATINGS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT Marking Code 12 20 VRRM Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage VRMS 14 Maximum DC Blocking Voltage VDC 20 Maximum Average Forward Rectified Current IO IFSM Peak Forward Surge Current 8.3 ms single half sine-wave A superimposed on rated load (JEDEC method) Typical Junction Capacitance (Note 1) CJ Operating Temperature Range TJ Storage Temperature Range 14 40 15 50 16 60 18 80 10 100 115 150 120 200 Volts 21 28 35 42 56 70 105 140 Volts 30 40 50 60 80 100 150 200 Volts C 1.0 30 RΘJA Typical Thermal Resistance (Note 2) 13 30 B 40 120 -55 to +125 Amps Amps ℃/W PF -55 to +150 ℃ - 65 to +175 TSTG ℃ CHARACTERISTICS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT VF Maximum Forward Voltage at 1.0A DC Maximum Average Reverse Current at @T A=25℃ Rated DC Blocking Voltage 0.50 0.70 Dimensions in inches and (millimeters) @T A=125℃ 0.85 0.5 IR 0.9 0.92 Volts 10 mAmps NOTES: 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Thermal Resistance From Junction to Ambient PACKAGE SMA-LS 2012-06 2012-1 A B C 0.110 (2.80) 0.063 (1.60) 0.087 (2.20) WILLAS ELECTRONIC CORP. WILLAS ELECTRONIC CORP.