IRF HFB16HY20CC

PD - 94223B
HFB16HY20CC
Ultrafast, Soft Recovery Diode
FRED
Features
•
•
•
•
•
VR = 200V
Reduced RFI and EMI
Reduced Snubbing
Extensive Characterization of Recovery Parameters
Hermetic
Ceramic Eyelets
IF(AV) = 16A
trr = 30ns
Description
These Ultrafast, soft recovery diodes are optimized to reduce losses and EMI/RFI in high frequency power
conditioning systems. An extensive characterization of the recovery behavior for different values of current,
temperature and di/dt simplifies the calculations of losses in the operating conditions. The softness of the recovery
eliminates the need for a snubber in most applications. These devices are ideally suited for power converters, motors
drives and other applications where switching losses are significant portion of the total losses.
Absolute Maximum Ratings
Parameter
VR
IF(AV)
IFSM
PD @ TC = 25°C
TJ, TSTG
Cathode to Anode Voltage ( Per Leg )
Continuous Forward Current,  TC = 132°C
Single Pulse Forward Current, ‚ TC = 25°C ( Per Leg )
Maximum Power Dissipation
Operating Junction and Storage Temperature Range
Max.
Units
200
16
130
84
-55 to +150
V
A
W
°C
Note:  D.C. = 50% rect. wave
‚ 1/2 sine wave, 60 Hz , P.W. = 8.33 ms
CASE STYLE
(ISOLATED BASE)
ANODE
COMMON
CATHODE
ANODE
TO-257AA
www.irf.com
1
03/13/06
HFB16HY20CC
Electrical Characteristics ( Per Leg ) @ TJ = 25°C (unless otherwise specified)
Parameter
VBR
Cathode Anode Breakdown Voltage
VF
Min. Typ. Max. Units
V
Test Conditions
200
—
—
IR = 100µA
Forward Voltage
—
—
1.09
See Fig. 1
—
—
0.98
—
—
1.15
IF = 16A, TJ = 25°C
—
—
1.06
IF = 16A, TJ = 125°C
IF = 8.0A, TJ = -55°C
V
IF = 8.0A, TJ = 25°C
See Fig. 2
IR
Reverse Leakage Current
See Fig. 2
—
—
—
—
10
100
µA
µA
VR = VR Rated
VR = V R Rated, TJ = 125°C
CT
Junction Capacitance, See Fig. 3
—
—
72
pF
V R = 200V
LS
Series Inductance
—
6.9
—
nH
Measured from anode lead to cathode
lead, 6mm ( 0.025 in. ) from package
Dynamic Recovery Characteristics ( Per Leg ) @ TJ = 25°C (unless otherwise specified)
Parameter
trr
trr1
trr2
IRRM1
IRRM2
Q rr1
Q rr2
di(rec)M/dt1
di(rec)M/dt2
Min.
Reverse Recovery Time
Reverse Recovery Time
Peak Recovery Current
Reverse Recovery Charge
Peak Rate of Fall of Recovery Current
During tb
—
—
—
—
—
—
—
—
—
Typ. Max. Units
—
30
55
4.0
7.7
66
224
620
1560
30
—
—
—
—
—
—
—
—
Test Conditions
ns
ns
IF = 1.0A,V R = 30V, dif/dt = 200A/µs
TJ = 25°C See Fig.
TJ = 125°C
5
IF = 16A
TJ = 25°C See Fig.
A
A
TJ = 125°C
6
VR = 160V
TJ = 25°C See Fig.
nC
nC
TJ = 125°C
7
dif/dt = 200A/µs
TJ = 25°C See Fig.
A/µs
8
A/µs TJ = 125°C
Thermal - Mechanical Characteristics
Parameter
RthJC
Wt
2
Junction-to-Case, Single Leg Conducting
Weight
Typ.
Max.
Units
—
4.3
1.49
—
°C/W
g
www.irf.com
HFB16HY20CC
100
100
125°C
Reverse Current - I R ( uA )
100°C
1
75°C
0.1
25°C
0.01
0.001
0.0001
0
40
80
120
160
200
Reverse Voltage - VR (V)
10
Fig. 2 - Typical Reverse Current Vs. Reverse
Voltage ( Per Leg )
1000
Tj = 125°C
Junction Capacitance - C T (pF)
Instantaneous Forward Current - I F (A)
10
Tj = 25°C
Tj = -55°C
TJ = 25°C
100
1
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
10
0
Forward Voltage Drop - V F (V)
40
80
120
160
200
Reverse Voltage - V R (V)
Fig. 1 - Maximum Forward Voltage Drop Vs.
Instantaneous Forward Current ( Per Leg )
Fig. 3 - Typical Junction Capacitance Vs.
Reverse Voltage ( Per Leg )
Thermal Response (Z thJC )
10
1
D = 0.50
0.20
0.10
PDM
0.05
0.1
0.02
0.01
0.01
0.00001
t1
SINGLE PULSE
(THERMAL RESPONSE)
t2
Notes:
1. Duty factor D = t1 / t 2
2. Peak TJ = P DM x Z thJC + TC
0.0001
0.001
0.01
0.1
1
t1, Rectangular Pulse Duration (sec)
Fig. 4 - Maximum Thermal Impedance Zthjc Characteristics ( Per Leg )
www.irf.com
3
HFB16HY20CC
80
70
TJ = 125°C
TJ = 25°C
IF = 8.0A
IF = 16A
IRRM - ( A )
IF = 16A
60
trr - ( ns )
100
VR = 160V
IF = 32A
50
IF = 32A
IF = 8.0A
10
40
VR = 160V
TJ = 125°C
TJ = 25°C
30
20
1
100
1000
100
1000
dif / dt - ( A / µs )
dif / dt - ( A / µs )
Fig. 5 - Typical Reverse Recovery Vs. dif/dt,( Per Leg )
Fig. 6 -Typical Recovery Current Vs. dif/dt ( Per Leg )
10000
1000
IF = 32A
IF = 16A
IF = 8.0A
IF = 16A
di ( rec )M / dt - ( A / µs )
Qrr - ( nC )
IF = 8.0A
100
VR = 160V
IF = 32A
1000
VR = 160V
TJ = 125°C
TJ = 25°C
TJ = 125°C
TJ = 25°C
100
10
100
1000
dif / dt - ( A / µs )
Fig. 7 - Typical Stored Charge Vs. dif/dt ( Per Leg )
4
100
1000
dif / dt - ( A / µs )
Fig. 8 - Typical di(rec)M/dt Vs. dif/dt ( Per Leg )
www.irf.com
HFB16HY20CC
3
trr
IF
REVERSE RECOVERY CIRCUIT
tb
ta
0
VR = 200V
Q rr
2
I RRM
0.01 Ω
0.5 I RRM
di(rec)M/dt
L = 70µH
5
0.75 I RRM
D.U.T.
1
dif/dt
ADJUST
4
di f /dt
D
1. dif/dt - Rate of change of current
through zero crossing
IRFP250
G
2. IRRM - Peak reverse recovery current
S
3. trr - Reverse recovery time measured
from zero crossing point of negative
going IF to point where a line passing
through 0.75 IRRM and 0.50 I RRM
extrapolated to zero current
Fig. 9 - Reverse Recovery Parameter Test Circuit
4. Qrr - Area under curve defined by trr
and IRRM
trr X IRRM
Qrr =
2
5. di(rec)M/dt - Peak rate of change of
current during tb portion of trr
Fig. 10 - Reverse Recovery Waveform and Definitions
Case Outline and Dimensions — TO-257AA
>@
$
>@
>@
>@
;‘
>@
>@
>@
>@
>@
>@
>@
>@
>@
>@
>@
%
>@
0$;
&
>@
>@
>@
;
>@
;‘
>@
‘>@
& $
127(6
',0(16,21,1*72/(5$1&,1*3(5$16,<0
&21752//,1*',0(16,21,1&+
',0(16,216$5(6+2:1,10,//,0(7(56>,1&+([email protected]
287/,1(&21)250672-('(&287/,1(72$$
>@
%
PIN ASSIGNMENT S ( CERAMIC EYE LETS )
1 = ANODE 1
2 = COMMON CATHODE
3 = ANODE 2
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
IR LEOMINSTER : 205 Crawford St., Leominster, Massachusetts 01453, USA Tel: (978) 534-5776
TAC Fax: (310) 252-7903
Visit us at www.irf.com for sales contact information.
Data and specifications subject to change without notice. 03/2006
www.irf.com
5