0.1 GHz to 40 GHz, SPST Switch HMC-C583 Preliminary Technical Data FUNCTIONAL BLOCK DIAGRAM 7 dB typical insertion loss Single positive control line 50 dB typical isolation Input third-order intercept (IP3): 40 dBm CMOS-compatible control Nonreflective topology Hermetically sealed module Field replaceable K-type connectors Operating temperature: −55°C to +85°C RF1 1 VDD VCTL GND 2 3 4 50Ω 50Ω HMC-C583 RF2 5 12965-001 FEATURES Figure 1. APPLICATIONS Base station infrastructure Fiber optics and broadband telecommunications Microwave radios and VSATs Military radios, radars, and electronic counter measures (ECM) Test instrumentation GENERAL DESCRIPTION The HMC-C583 is a 0.1 GHz to 40 GHz, gallium arsenide (GaAs), pseudomorphic high electron mobility transfer (pHEMT), IC single-pole, single-throw (SPST) switch housed in a miniature hermetic module. This wideband switch features 7 dB typical insertion loss, 50 dB typical isolation, and 40 dBm input IP3. Rev. PrB The switching on/off time is 10 ns typical. A single control voltage input, toggled between 0 V and 5 V, selects the switch state. Removable K-type connectors can be detached to allow direct connection of the input/output pins of the module to a microstrip or coplanar circuit. Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 ©2016 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com HMC-C583 Preliminary Technical Data TABLE OF CONTENTS Features .............................................................................................. 1 Pin Configuration and Function Descriptions..............................5 Applications ....................................................................................... 1 Interface Schematics .....................................................................5 Functional Block Diagram .............................................................. 1 Typical Performance Characteristics ..............................................6 General Description ......................................................................... 1 Theory of Operation .........................................................................7 Specifications..................................................................................... 3 Applications Information .................................................................8 Absolute Maximum Ratings ............................................................ 4 Outline Dimensions ..........................................................................9 ESD Caution .................................................................................. 4 Rev. PrB | Page 2 of 9 Preliminary Technical Data HMC-C583 SPECIFICATIONS VDD = 5 V, VCTL = 0 V or 5 V, TA = 25°C, unless otherwise noted. Table 1. Parameter INSERTION LOSS ISOLATION Symbol INPUT POWER FOR 0.1 dB COMPRESSION P0.1dB INPUT THIRD-ORDER INTERCEPT RETURN LOSS SUPPLY INPUT CONTROL INPUTS Input Voltage High Low Input Current SWITCHING CHARACTERISTICS Rise Time/Fall Time On Time/Off Time Min Typ 7 Max 10 Unit dB 40 50 dB Test Conditions/Comments 0.1 GHz to 40 GHz Includes insertion loss 0.1 GHz to 40 GHz 5 21 dBm dBm 0.1 GHz to 0.5 GHz 0.5 GHz to 40 GHz 20 40 10 5 dBm dBm dB V 0.1 GHz to 2 GHz 2 GHz to 40 GHz 0.1 GHz to 40 GHz IP3 VDD 4.5 5.5 VINH VINL IIN 3.5 to VDD 0 to 1.5 ±20 V V µA VIN = 0 V or VDD tRISE/tFALL tON/tOFF 1 10 ns ns 10%/90% radio frequency (RF) 50% VCTL to 10%/90% RF Rev. PrB | Page 3 of 9 HMC-C583 Preliminary Technical Data ABSOLUTE MAXIMUM RATINGS Stresses at or above those listed under Absolute Maximum Ratings may cause permanent damage to the product. This is a stress rating only; functional operation of the product at these or any other conditions above those indicated in the operational section of this specification is not implied. Operation beyond the maximum operating conditions for extended periods may affect product reliability. Table 2. Parameter Supply Input (VDD) Control Voltage (VCTL) RF Input Power 0.1 GHz to 0.5 GHz 0.5 GHz to 2 GHz 2 GHz to 40 GHz Hot Switch Power Level 0.1 GHz to 0.5 GHz 0.5 GHz to 2 GHz 2 GHz to 40 GHz Operating Temperature Range Storage Temperature Range ESD Rating, Human Body Model (HBM) Rating 5.8 V VDD ± 0.5 V 5 dBm 18 dBm 25 dBm 3 dBm 16 dBm 23 dBm −55°C to +85°C −65°C to +150°C Class 1A (>250 V) ESD CAUTION Rev. PrB | Page 4 of 9 Preliminary Technical Data HMC-C583 PIN CONFIGURATION AND FUNCTION DESCRIPTIONS HMC-C583 RF1 1 5 RF2 3 4 VCTL GND 12965-002 2 VDD TOP VIEW Figure 2. Pin Configuration Table 3. Pin Function Descriptions Pin No. 1 Mnemonic RF1 2 3 4 5 VDD VCTL GND RF2 Description RF Input/Output 1. This pin is dc-coupled and matched to 50 Ω. Blocking capacitors are required if the RF line potential is not equal to 0 V dc. Positive Supply Voltage, 5 V DC. Control Pin. Power Supply Ground. RF Input/Output 2. This pin is dc-coupled and matched to 50 Ω. Blocking capacitors are required if the RF line potential is not equal to 0 V dc. INTERFACE SCHEMATICS 12965-003 RF1/RF2 VCTL Figure 3. RF1/RF2 Interface Schematic –5V INTERNAL 12965-004 GND 4.7kΩ Figure 4. GND Interface Schematic Figure 5. VCTL Interface Schematic Rev. PrB | Page 5 of 9 12965-005 5V ZENER DIODE HMC-C583 Preliminary Technical Data TYPICAL PERFORMANCE CHARACTERISTICS 0 0 –5 –10 RETURN LOSS (dB) –4 –6 –55°C +25°C +85°C –8 –20 –25 –55°C +25°C +85°C –30 –35 –40 12965-006 –10 –12 –15 0 5 10 15 20 25 30 35 40 45 12965-009 INSERTION LOSS (dB) –2 –45 –50 50 0 5 10 15 20 25 30 35 40 45 50 FREQUENCY (GHz) FREQUENCY (GHz) Figure 6. Insertion Loss vs. Frequency at Various Temperatures Figure 9. Return Loss vs. Frequency at Various Temperatures for RF1, RF2 0 50 –10 –20 40 –55°C +25°C +85°C –40 IP3 (dBm) ISOLATION (dB) –30 –50 –60 –55°C +25°C +85°C 30 20 –70 –80 0 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 –100 12965-010 12965-007 10 –90 0 10 5 FREQUENCY (GHz) 15 20 25 FREQUENCY (GHz) 30 35 40 Figure 10. IP3 vs. Frequency at Various Temperatures Figure 7. Isolation vs. Frequency at Various Temperatures 20 30 18 –55°C +25°C +85°C 16 14 POWER (dBm) 20 –55°C +25°C +85°C 15 10 12 10 8 6 4 0 0 5 10 15 20 25 30 35 12965-011 5 12965-008 INPUT POWER (dBm) 25 2 0 40 0 0.2 0.4 0.6 0.8 1.0 FREQUENCY (GHz) FREQUENCY (GHz) Figure 8. Input 0.1 dB Compression (Low Frequency) Figure 11. Input 0.1 dB Compression (High Frequency) Rev. PrB | Page 6 of 9 1.2 Preliminary Technical Data HMC-C583 THEORY OF OPERATION Applying a TTL-level voltage to the VCTL pin provides an insertion loss between the RF1 and RF2 connectors from 7 dB typical to 10 dB typical. When the HMC-C583 is in a high insertion loss state, both the RF1 and RF2 pins are internally terminated to 50 Ω. Table 4. VCTL Level Low High The low state level is a voltage between 0 V and 1.5 V, and the high state level is a voltage between 3.5 V and VDD. Rev. PrB | Page 7 of 9 Typical Insertion Loss Level (dB) 7 50 HMC-C583 Preliminary Technical Data APPLICATIONS INFORMATION This type of circuit can create modulated RF signals for various applications, which is only one of the many applications of the HMC-C583. In Figure 12, the HMC-C583 makes an RF pulse modulator. In this application circuit, the HMC-C583 modulates the amplitude of the output of the synthesized RF signal generator. RF PULSE MODULATOR RF1 1 VCTL GND 2 3 4 50Ω 50Ω RF2 5 RF OUTPUT HMC-C583 12965-012 HMC-T2240 SIGNAL GENERATOR VDD Figure 12. Typical Application Circuit Rev. PrB | Page 8 of 9 Preliminary Technical Data HMC-C583 OUTLINE DIMENSIONS 0.373 (9.46) 1.000 (25.40) 0.360 (9.15) 0.245 (6.21) 0.180 (4.57) 0.255 (6.48) 0.075 (1.91) BOTTOM VIEW 0.160 (4.06) 0.772 (19.61) 1 5 0.900 (22.86) 0.475 (12.07) 2 0.064 (1.63) 3 TOP VIEW 0.105 (2.67) Ø 0.098 (2.93) 4 END VIEW 0.030 (0.76) END VIEW 0.105 (2.67) 0.03 × 45° 0.245 (6.22) (SHOWN WITH MOUNTING SPACER REMOVED) CHAMFER INDICATES ORIENTATION 0.500 (12.70) 0.755 (19.18) 1.756 (44.60) SIDE VIEW SIDE VIEW Ø 0.012 (0.305) (SHOWN WITH MOUNTING SPACER REMOVED) CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN. Figure 13. 5-Lead Module with Connector Interface [MODULE] (ML-5-1) Dimensions shown in inches and (millimeters) ©2016 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. PR12965-0-2/16(PrB) Rev. PrB | Page 9 of 9 09-28-2015-A PKG-000000 0.056 (1.42)