CYPRESS EZ-BLETM PRoCTM Modules Fully Integrated, Fully Certified, Programmable Bluetooth® Smart Modules P R O D U C T O V E RV I E W INTRODUCTION F E AT U R E S EZ-BLE PRoC Modules are fully integrated, fully certified, programmable, Bluetooth Smart or Bluetooth Low Energy (BLE) module designed for ease-of-use and reducing time-to-market. They contain Cypress’s PRoC Bluetooth Low Energy (BLE) chip, two crystals, antenna, shield and passive components. EZ-BLE PRoC Modules provide a simple and low cost way to add a microcontroller, CapSense® touch controller and Bluetooth Smart connectivity to any system. FOOTPRINT AS SMALL AS 10 MM X 10 MM X 1.8 MM FULLY CERTIFIED • Bluetooth 4.1/4.2 Qualified with QDID • Fully certified for international RF regulations - FCC, IC, MIC/TELEC, CE and KC EZ- BLE PR o C MODULE BLOCK DIAGRA M (CYBLE- 022001- 00) PSOC® CREATORTM INTEGRATED DEVELOPMENT ENVIRONMENT Power/ Ground 4 2 EZ-BLE PRoC Module 32.768-kHz Crystal PRoC BLE XRES 24 MHz Crystal Antenna 14 SWD/ GPIO SPI/I2C/ UART/I2S CapSense/ ADC/ PWM/GPIO PS o C CREATOR – FULLY INTEGRATED DESIGN ENVIRONMENT (IDE) EZ-BLE PRoC Modules come with an easy-to-use IDE, PSoC Creator, to configure, develop and program a Bluetooth Smart application. PSoC Creator also provides an option to use third party IDEs such as Keil MDK, IAR or Eclipse after the initial hardware design. Cypress also provides the CySmart test and debug tool, used to emulate a host device for peer testing. CySmart is available as a Windows application, iOS app and Android app. EZ- BLE PR o C MODULE ADVANTAGES • Available in a footprint as small as 10 mm x 10 mm x 1.8 mm to support space- constrained applications. • Fully certified (QDID, FCC, IC, CE, MIC/TELEC and KC) to get Bluetooth Smart products to market faster and save on certification costs. 48-MHZ ARM® CORTEX®-M0 MICROCONTROLLER • 32-bit processor (0.9 DMIPS/MHz) • 128-KB flash/16-KB SRAM or 256-KB flash/32-KB SRAM BLUETOOTH 4.1/4.2 COMPLIANT BLUETOOTH LOW ENERGY RADIO AND PROTOCOL STACK • -87-dBm Rx sensitivity • -18-dBm to +3-dBm Tx power • Supports Special Interest Group (SIG) adopted profiles and services • GUI based custom profile design • Generic Access Profile (GAP) roles - Broadcaster, Observer, Central, Peripheral MULTIPLE INTERFACE OPTIONS • 2 x serial communication blocks configurable as UART, I2C or SPI • I2S for audio • Up to 23 GPIOs ADDITIONAL ON-BOARD RESOURCES • 1 x 12-bit, 1 Msps SAR ADC • 4 x Timer/Counter/PWMs 24 MHZ AND 32.768 KHZ CRYSTALS 2.4-2.5 GHZ CHIP OR PCB ANTENNA SMT-READY • GUI-based configuration of BLE protocol stack and profiles to reduce design cycle time. WIDE OPERATING VOLTAGE (1.9 V TO 5.5 V) • Integrated CapSense touch controller to support touch-based buttons/sliders/ INDUSTRIAL TEMPERATURE RANGE (-40°C TO +85°C) touchpads/proximity. www.cypress.com/ez-blemodule CAPSENSE™ TOUCH CONTROLLER • Touch buttons/sliders/touchpads/proximity • SmartSense™ Auto-Tuning • Fully integrated (PRoC BLE, crystals, antenna, shield and passive components). • Flexible ultra-low power modes to enable longer battery life. P R O D U C T O V E RV I E W EZ- BLE PR o C MODULE APPLICATIONS EZ-BLE PRoC Modules are a perfect fit for a variety of medical and industrial applications, PC accessories, toys, remote controls, gaming controllers, beacons and any other application which needs simple, Bluetooth Smart-based wireless connectivity. EZ- BLE PR o C MODULE KITS Cypress offers the following kits to get started with the EZ-BLE PRoC Module. EZ-BLE PRoC Evaluation Board (CYBLE-222005-EVAL) Bluetooth Low Energy Pioneer Kit (CY8CKIT-042-BLE) PSoC MiniProg3 Program and Debug Kit (CY8CKIT-002) Evaluation Boards enable application development with the EZ-BLE PRoC Module family. EZ-BLE Evaluation Boards can be used with the Bluetooth Low Energy Pioneer Kit (CY8CKIT-042-BLE) or the PSoC MiniProg3 Kit (CY8CKIT-002). EZ-BLE PRoC Evaluation Board (CYBLE-222005-EVAL) with BLE Pioneer Kit (CY8CKIT-042-BLE) EZ-BLE PRoC Evaluation Board (CYBLE-222005-EVAL) with PSoC MiniProg3 Program and Debug Kit (CY8CKIT-002) ORDERING INFORM ATION Part Number Flash (KB) SRAM (KB) BT Spec CapSense SCB 1 TCPWM 2 12-bit SAR ADC I 2S LCD Operating Temperature Package CYBLE-022001-00 128 16 4.1 Yes 2 4 1 Msps Yes Yes -40°C to +85°C 21-SMT CYBLE-222005-00 256 32 4.1 Yes 2 4 1 Msps Yes Yes -40°C to +85°C 22-SMT CYBLE-012011-00 128 16 4.1 Yes 2 4 1 Msps Yes Yes -40°C to +85°C 31-SMT CYBLE-012012-10 128 16 N/A Yes 2 4 1 Msps Yes Yes -40°C to +85°C 31-SMT CYBLE-212019-00 256 32 4.1 Yes 2 4 1 Msps Yes Yes -40°C to +85°C 31-SMT CYBLE-212023-10 256 32 N/A Yes 2 4 1 Msps Yes Yes -40°C to +85°C 31-SMT CYBLE-212020-01 256 32 4.2 Yes 2 4 1 Msps Yes Yes -40°C to +85°C 31-SMT CYBLE-222014-01 256 32 4.2 Yes 2 4 1 Msps Yes Yes -40°C to +85°C 22-SMT 1. Serial communication blocks (configurable to I2C, SPI or UART) 2. Configurable timer, counter, pulse-width modulator To download the datasheet, buy kits and for latest information on EZ-BLE PRoC Module visit www.cypress.com/ez-blemodule Cypress Semiconductor Corporation 198 Champion Court, San Jose CA 95134 phone +1 408.943.2600 fax +1 408.943.6848 toll free +1 800.858.1810 (U.S. only) Press “1” to reach your local sales representative © 2015-2016 Cypress Semiconductor Corporation. All rights reserved. All other trademarks are the property of their respective owners. 001-97115 Rev.*E