7,40 ±0,30 0,291 ±0,012 1,00 ±0,20 0,039 ±0,008 DETAIL A 3:1 IMPROVED CONTACT DESIGN (PRE BEND) DETAIL B 3:1 2,20 ±0,50 0,087 ±0,020 109,21 ±0,13 4,300 ±0,005 3,30 0,130 MAX 115,06 4,530 7 x 13.97[0.550 ]= 97,79 3,850 28,50 1,122 MAX 1 8 1 8 1 8 1 8 1 8 1 8 1 8 1 1 8 1 8 1 8 1 8 1 8 1 8 1 8 1 8 3,20 ±0,30 0,126 ±0,012 8 25,50 1,004 MAX A B 10,89 0,429 T e c hnical sp e cif icat io ns Stand ard ap p l i c . Standard description Standard description Thickness of plating Thickness of plating Standard description A sse mb l y p ro c e ss Packaging Solder temperature Suitable assembly process A p p ro v al s UL insulation body UL File No. RoHS compliant UL 94 Val ue T e st D ata Stand ard ap p l i c . Val ue PA 66 Me c hani c al p ro p e rti e s C5210 (acc. JIS) Insertion/withdrawal force IEC 603-7 max. 20 N 30 µin Au over 50 µin Ni Mechanical operations IEC 512-5, 9a min. 1.000 80 µin matte Sn over 50 µin Ni Effectiveness of connector C2680 (acc JIS) coupling device IEC 512-8, 15f 50 N 50 µin Ni / 80 µin Sn El e c tri cal p ro p e rti e s Cre e p ag e / c l e aran ce d i stanc e s a) Contact - contact IEC 807-3 0,52 mm Tray b) Contact - shell IEC 807-3 min. 1,0 mm 235°C at 10s Vo l tag e p ro o f (D i e l e c tri c Wi thstand Vo l tag e ) wave a) Contact - contact IEC 512-2, 4a min. 1.000 V AC/DC b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC Current carrying capacity IEC 512-3, 5b 1,5 A @ 25° C V0 Contact resistance IEC 512-2, 2a max. 30 mOhm E145613 Insulation resistance IEC 512-2, 3a min. 500 MOhm Yes Env i ro nme ntal p ro p e rti e s Operation temperature 0 - 70° C NOTE 1: PANEL GROUND FLANGES, TOP, BOTTOM, SIDES - 4 FLANGES (GF10) NOTE 2: REAR GROUNDING PIN BETWEEN EVERY OTHER PORT (P) NOTE 3: 3 SIDE GROUND PINS EACH SIDE; STAGGERED (S1) NOTE 4: RoHS COMPLIANT Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed. Mate ri al s & Fi ni sh Insulation body Contact material Contact finish, mating zone Contact finish termination zone Shell/shield material Plating shield / shielding pin Tolerances Information: Scale 2:1 All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJD 8P8C, 2 x 8, CAT5 133035 www.ERNI.com i 16.06.2014 Index Date Class MJ I (1/2) A3 RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN-AUSSCHNITT RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL. 0.05 [0.002] UNLESS NOTED 116,16 ±0,20 4,573 ±0,008 107,95 4,250 96,52 3,800 0,38 ±0,10 0,015 ±0,004 80,01 3,150 68,58 2,700 66,04 2,600 52,07 2,050 26,16 1,030 93,98 3,700 TOP OF PCB LP 40,64 1,600 38,10 1,500 24,13 0,950 12,70 0,500 9,15 0,360 1 8 8 1 8 8 8 8 1 1 8 8 1 8 8 1 8 1 8 8 11,40 0,449 1 1 5,85 0,230 1 1 8 8 1 1 0,89 ±0,07 0,035 ±0,003 x128 3,25 ±0,07 0,128 ±0,003 x2 1,60 ±0,07 0,063 ±0,003 x10 2,13 0,084 2,13 0,084 2,79 0,110 109,21 4,300 1:1 2,79 0,110 Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed. 17,19 0,677 15,46 0,609 8 1 1 1 2,54 0,100 1,27 0,050 8,89 0,350 2,54 0,100 2,54 0,100 4,57 0,180 10,16 0,400 Scale Tolerances Information: 2:1 All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJD 8P8C, 2 x 8, CAT5 133035 www.ERNI.com i 16.06.2014 Index Date Class MJ (2/2) A3