21,59 0,850 MAX RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN-AUSSCHNITT RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL. 0.05 [0.002] UNLESS NOTED 1,27 0,050 16,38 0,645 min. 1,60 3,25 ±0 15,88 0,625 2,54 0,100 ±0, 07 ±0,0 ,07 7 0,03 5 0,06 ±0, 003 3 ±0,0 0,128 ± 0,003 03 X8 2 4 6 8 X2 1 3 5 7 X2 8 3,05 0,120 13,65 0,537 1 3,20 0,126 21,40 0,843 8,89 0,350 1,27 0,050 0,89 2,54 0,100 PCB EDGE LP 13,95 0,580 min. 0,635 0,025 11,43 0,450 15,49 0,610 3,05 0,120 11,43 0,450 2,54 0,100 8,89 0,350 10,89 0,429 Mate ri al s & F i ni sh Insulation body Contact material Contact finish, mating zone Contact finish termination zone Shell/shield material Plating shield / shielding pin Stand ard ap p l i c . Standard description Standard description Thickness of plating Thickness of plating Standard description A sse mb l y p ro c e ss Packaging Solder temperature Suitable assembly process A p p ro v al s UL insulation body UL File No. RoHS compliant UL 94 Val ue T e st Data Stand ard ap p l i c . Val ue PBT 30% Me c hani c al p ro p e rti e s C5210 (acc. JIS) Insertion/withdrawal force IEC 603-7 max. 20 N 30 µin Au over 50 µin Ni Mechanical operations IEC 512-5, 9a min. 1.000 80 µin matte Sn over 50 µin Ni Effectiveness of connector C2680 (acc. JIS) coupling device IEC 512-8, 15f 50 N 50 µin Ni / 80 µin Sn El e c tri c al p ro p e rti e s Cre e p ag e / c l e aranc e d i stanc e s a) Contact - contact IEC 807-3 0,52 mm Tray b) Contact - shell IEC 807-3 min. 1,0 mm 235°C at 3-5s Vo l tag e p ro o f (Di e l e c tri c Wi thstand Vo l tag e ) wave a) Contact - contact IEC 512-2, 4a min. 1.000 V AC/DC b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC Current carrying capacity IEC 512-3, 5b 1,5 A @ 25° C V0 Contact resistance IEC 512-2, 2a max. 30 mOhm E145613 Insulation resistance IEC 512-2, 3a min. 500 MOhm Yes Env i ro nme ntal p ro p e rti e s Operation temperature 0 - 70° C NOTE 1: SIDE SHIELD TABS IN REAR 3.05 mm NOTE 2: RoHS COMPLIANT Part No. Ident-nr. 133165 Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. T e chnical spe cif icat io ns 1:1 Tolerances Information: Fraction Decimals X ±0.50 X.X ±0.38 X.XX ±0.25 X.XXX ±0.10 All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Transmission PCB Hole numbering LP Requirement Bohrungsnummerierung Übertragungsanforderung Category 5 dual twist Scale 14.10.2014 Index Date 4 3 6 5 8 7 2:1 Angles ± 1° All Dimensions in mm [in] Designation Subject to modification without prior notice. Drawing will not be updated. Mod Jack - MJR 8P8C, 1x1, CAT5 133800 www.ERNI.com g 2 1 Class MJ I (1/1) A3