RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN-AUSSCHNITT RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL. 0.05 [0.002] UNLESS NOTED 0,76 0,030 3,18 0,125 TOP OF PCB LP 12,29 0,484 6,35 0,250 1,27 0,050 11,75 0,463 6 2,54 0,100 3,05 0,120 18,67 0,735 13,70 0,539 1 11,47 0,452 1,27 0,050 1 6 1,825 0,072 3,30 ±0,07 0,130 ±0,003 X2 0,10 0,004 MAX 1,60 0,063 3,05 ±0,20 0,120 ±0,008 14,66 0,577 3,12 0,123 10,16 ±0,13 0,400 ±0,005 2,50 16,46 ±0,25 0,648 ±0,010 +0,30 0,00 0,098 +0,012 0,000 8,13 0,320 2,50 0,098 10,16 0,400 13,81 0,544 IMPROVED CONTACT DESIGN (PRE BEND) 1:1 T e c hnical spe cif icat io ns Stand ard ap p l i c . Standard description Standard description Thickness of plating Thickness of plating Standard description Thickness of plating A sse mb l y p ro c e ss Packaging Solder temperature Suitable assembly process A p p ro v al s UL insulation body UL File No. RoHS compliant UL 94 E145613 Val ue T e st Data Stand ard ap p l i c . Val ue PA46 30% Me c hani c al p ro p e rti e s CuSn8 Insertion/withdrawal force IEC 603-7 max. 20 N 30 µin Au over 50 µin Ni Mechanical operations IEC 512-5, 9a min. 1.000 80 µin matte Sn over 50 µin Ni Effectiveness of connector CuZn32 coupling device IEC 512-8, 15f 50 N 50 µin Ni El e c tri c al p ro p e rti e s Cre e p ag e / c l e aran c e d i stanc e s a) Contact - contact IEC 807-3 0,52 mm Tray b) Contact - shell IEC 807-3 min. 0,1 mm 260°C at 3-5s Vo l tag e p ro o f (Di e l e c tri c Wi thstan d Vo l tag e ) reflow a) Contact - contact IEC 512-2, 4a min. 1.000 V AC/DC b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC Current carrying capacity IEC 512-3, 5b 1,5 A @ 25° C V0 Contact resistance IEC 512-2, 2a max. 30 mOhm Insulation resistance IEC 512-2, 3a min. 500 MOhm Yes Env i ro nme ntal p ro p e rti e s Operation temperature -40 - +85° C NOTE 1: PANEL GROUNDFLANGES TOP, SIDES (GF5) NOTE 2: C-UL APPROVED E145613 AND MEETS FCC REQUIREMENTS NOTE 3: RoHS COMPLIANT Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. Mate ri al s & Fi ni sh Insulation body Contact material Contact finish, mating zone Contact finish termination zone Shell/shield material Shell/shield plating Tolerances Information: Scale 2:1 All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJLS 6P6C, 1X1, SMT 133719 www.ERNI.com d 26.05.2010 Index Date Class MJ (1/1) A3