RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT 0,63 15,88 PCB EDGE LP 0,58 14,72 0,85 21,59 MAX 0,01 ±0,00 0,38 ±0,10 0,66 16,66 L.E.D. 2 1 8 0,54 13,63 0,12 ±0,02 3,05 ±0,50 B L.E.D. 1 0,45 ±0,01 11,43 ±0,13 0,43 10,89 NOTE 1: SIDE SHIELD TABS IN REAR 3.05mm (R) NOTE 2: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5) LED 2 LEFT LED 2 LINKS LED 1 RIGHT LED 1 RECHTS LED CODE 203198 YELLOW GREEN L1 203199 GREEN YELLOW L2 203200 GREEN GREEN L3 203201 RED GREEN L5 203202 YELLOW YELLOW L8 203203 ORANGE/GREEN ORANGE/GREEN L9 NO. IDENT. NR. MATERIALS AND FINISH HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK SHIELDING: Cu ALLOY, PLATED WITH Ni CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8 µm (30 µin) OVER Ni TERMINAL FINISH: Sn MATTE B LED LENS: EPOXY MECHANICAL CHARACTERISTICS DURABILITY: 1000 MATING CYCLES ELECTRICAL CHARACTERISTICS CONTACT RESISTANCE: 30 MILLIOHMS MAX OPERATING TEMPERATURE: 0°C TO 70°C Tolerances Information: SCHEMATIC NUMBER: M3D01 Scale 2:1 All Dimensions in mm Consider protection memo from DIN 34 Designation All rights reserved. Only for Information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. B 20.05.2008 Index Date Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJIM 8C8T, 1x1, INT. MAG., LED ALIGNED 203197 www.ERNI.com Class MJIM I (1/2) A3 ELECTRICAL SCHEMATIC M3D01 ELEKTRISCHER SCHALTPLAN PCB CABLE P1 J1 CT P4 P2 J2 P3 J3 P6 J6 CT P5 N/C P7 J4,5 GND P8 J7,8 Ohms 4X 75 1000pF/2KV B RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTÜCKUNGSSEITE) TOL ±0.05 [.002] UNLESS NOTED SCALE: 2.5 : 1 0,05 1,27 0,03 0,64 0,10 2,54 0,04 ±0,00 X8 0,89 ±0,07 8 1 ±0,00 X2 0,06 0,07 1,60 ± X4 0,35 8,89 10 0,12 3,05 9 0,10 2,54 11 12 X2 0,16 4,06 00 ±0 , 7 0,13 5 ±0,0 2 3, 0 0 ,0 4 ± ±0,07 0 , 0 02 1, 0,32 8,18 0,45 11,43 0,52 13,26 0,61 15,49 LED SPECIFICATIONS LED ANWEISUNG COLOR FARBE MAGNETICS SPECIFICATIONS @ 25°C AUTO MDIX COMPATIBLE TURNS RATIO: (P1-P2 : J1-J2) (P3-P6 : J3-J6) OCL(100 KHz, 0.1 Vrms, 8 mA) (P1-P2 : P3-P6) INSERTION LOSS: 0.1-100 MHz CIRCUIT DIAGRAM I V f TYP f MAX f mA YELLOW 2.1 2.5 20 9 10 11 12 GREEN 2.2 2.5 20 9 10 11 12 RED 2.25 2.5 20 9 10 11 12 ORANGE/GREEN 2.05/2.2 2.5 20 SCHALTPLAN 350µH MIN 0.9 OHMS MAX -1.1 dB MAX RETURN LOSS: 0.5 - 30 MHz: 40 MHz: 50 MHz 60 - 80 MHz -18 dB MIN -15.5 dB MIN -13.6 dB MIN -12 dB MIN CROSSTALK: 1-100 MHz -40 dB TYP Information: Tolerances Scale 9 10 11 12 G G N N 2:1 All Dimensions in mm Designation CMR: 0.1 - 30 MHz 30 - 60 MHz 60 - 100 MHz -50 dB TYP -40 dB TYP -35 dB TYP ISOLATION 1500 Vrms Consider protection memo from DIN 34 DCR (P1-P2, P3-P6) 1CT : 1 ±3% 1CT : 1 ±3% V All rights reserved. Only for Information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJIM 8C8T, 1x1, INT. MAG., LED ALIGNED 203197 www.ERNI.com Class MJIM I (2/2) A3