RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT L.E.D. 1 13.63 [.537] 8 PCB EDGE LP 3.05±0.50 [.120±.020] 1 14.72 [.580] 0.38±0.10 [.015±.004] 21.59 [.850] MAX 15.88 [.625] L.E.D. 2 16.66 [.656] 10.89 [.429] 11.43±0.13 [.450±.005] NOTE 1: SIDE SHIELD TABS IN REAR 3.05mm (R) NOTE 2: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5) NO. IDENT. NR. LED 2 LEFT LED 2 LINK LED 1 RIGHT LED 1 RECHTE LED CODE 203192 YELLOW GREEN L1 203278 GREEN GREEN L3 HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK SHIELDING: Cu ALLOY, PLATED WITH Ni CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8 µm (30 µin) OVER Ni TERMINAL FINISH: SOLDER LED LENS: EPOXY MECHANICAL CHARACTERISTICS DURABILITY: 1000 MATING CYCLES OPERATING TEMPERATURE: 0°C TO 70°C Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. MATERIALS AND FINISH Tolerances Information: Scale - All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. b Rev. 03I002 Date Designation Subject to modification without prior notice. Drawing will not be updated. 2:1 MOD JACK - MJIM 8C8T, 1X1, INT. MAG., LED STAGGERED 203291 www.ERNI.com Class MAXMJ I (1/2) A3 ELECTRICAL SCHEMATIC M3D01 ELEKTRISCHES DIAGRAMM PCB CABLE P1 J1 P2 J2 P3 J3 P6 J6 CT P4 CT P5 N/C P7 J4,5 GND P8 J7,8 1000pF/2KV W 4X 75 RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENER FUER LEITERPLATTE (BESTUECKUNGSSEITE) TOL ±0.05 [.002] UNLESS NOTED SCALE: 2 : 1 1.27 [.050] 0.64 [.025] 2.54 [.100] 8.89 [.350] 8 0.89±0.07 [ .035±.003] X8 1 1.60±0.07 [ .063±.003] X2 2.54 [.100] 3.05 [.120] 1.02±0.07 [ .040±.003] X4 2.54 [.100] 12 11 4.90 [.193] 9 10 3.38 [.133] 3.25±0.07 [ .128±.003] X2 0.61 [.024] 10.11 [.398] 11.43 [.450] 12.65 [.498] 15.49 [.610] MAGNETICS SPECIFICATIONS @ 25°C AUTO MDIX COMPATIBLE TURNS RATIO: (P1-P2 : J1-J2) 1CT : 1 ±3% (P3-P6 : J3-J6) 1CT : 1 ±3% LED SPECIFICATIONS LED ANWEISUNG DCR (P1-P2, P3-P6) 0.9 OHMS MAX INSERTION LOSS: 0.1-100 MHz -1.1 dB MAX RETURN LOSS: 0.5 - 30 MHz: 40 MHz: 50 MHz 60 - 80 MHz -18 dB MIN -15.5 dB MIN -13.6 dB MIN -12 dB MIN CROSSTALK: 1-100 MHz -40 dB TYP CMR: 0.1 - 30 MHz 30 - 60 MHz 60 - 100 MHz -50 dB TYP -40 dB TYP -35 dB TYP ISOLATION 1500 Vrms Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. OCL(100 KHz, 0.1 Vrms, 8 mA) (P1-P2 : P3-P6) 350µH MIN COLOR FARBE Vf TYP Vf MAX mA YELLOW 2.1 2.5 20 9 GREEN 2.2 2.5 20 9 Tolerances Information: Scale in mm b 03SEP04 Designation Subject to modification without prior notice. Drawing will not be updated. CIRCUIT DIAGRAM SCHALTSKIZZE 10 10 11 11 12 12 2:1 - All Dimensions All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. If MOD JACK - MJIM 8C8T, 1X1, INT. MAG., LED STAGGERED 203291 www.ERNI.com Class MAXMJ I (2/2) A3