21.59 [.850] MAX #7 TERMINALS REMOVED ANSCHLUSS ABGESCHNITTEN 8 13.63 [.537] 1 3.20±0.20 [.126±.008] 15.88 [.625] 10.89 [.429] 11.43±0.13 [.450±.005] RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENER FUER LEITERPLATTE (BESTUECKUNGSSEITE) TOL ±0.05 [.002] UNLESS NOTED RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT 1.27 [.050] 0.64 [.025] 0.10 [.004] MAX 8 0.89±0.07 [ .035±.003] X7 1 MAGNETICS SPECIFICATIONS @ 25°C 11.43 [.450] AUTO MDIX COMPATIBLE TURNS RATIO: (P1-P2 : J1-J2) (P3-P6 : J3-J6) 1CT : 1 ±3% 15.49 [.610] 1CT : 1 ±3% -1.1 dB MAX RETURN LOSS: 0.5 - 30 MHz: 40 MHz: 50 MHz 60 - 80 MHz -18 dB MIN -15.5 dB MIN -13.6 dB MIN -12 dB MIN CROSSTALK: 1-100 MHz -40 dB TYP CT -50 dB TYP -40 dB TYP -35 dB TYP ISOLATION 1500 Vrms MATERIALS AND FINISH HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK SHIELDING: Cu ALLOY, PLATED WITH Ni CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8 µm (30 µin) OVER Ni TERMINAL FINISH: SnPb MECHANICAL CHARACTERISTICS DURABILITY: 1000 MATING CYCLES OPERATING TEMPERATURE: 0°C TO 70°C GND J1 P4 P2 J2 P3 J3 P5 P6 J6 J4,5 J7,8 P8 1000pF/2KV 4X 75 W NOTE 1: SIDE SHIELD TABS IN REAR 3.05mm (R) Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. CMR: 0.1 - 30 MHz 30 - 60 MHz 60 - 100 MHz CABLE P1 CT 0.9 OHMS MAX INSERTION LOSS: 0.1-100 MHz ELECTRICAL SCHEMATIC M3D01 ELEKTRISCHES DIAGRAMM PCB OCL(100 KHz, 0.1 Vrms, 8 mA) (P1-P2 : P3-P6) 350µH MIN DCR (P1-P2, P3-P6) PCB EDGE LP 8.89 [.350] 3.05 [.120] 3.25±0.07 [ .128±.003] X2 2.54 [.100] 1.60±0.07 [ .063±.003] X2 14.72 [.580] 16.66 [.656] 2.54 [.100] Tolerances Information: 2:1 Scale - All Dimensions in mm Designation All rights reserved. Subject to modification without Only for Information. prior notice. To ensure that this is the latest Drawing will not be updated. version of this drawing, please 8C7T, contact one of the ERNI companies before using. MOD JACK - MJIM b 02JUL04 Rev. Date www.ERNI.com Class 1X1, INTEGRATED MAGNETICS 203281 MAXMJ I (1/1) A3