RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT L.E.D. 2 1 8 L.E.D. 1 14,72 0,58 0,38 ±0,10 0,01 ±0,00 PCB EDGE LP 13,63 0,54 15,88 0,63 3,05 ±0,5 0,12 ±0,02 21,59 0,85 MAX 16,66 0,66 NOTE 1: SIDE SHIELD TABS IN REAR 3.05mm (R) NOTE 2: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5) 10,89 0,43 MATERIALS AND FINISH HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK SHIELDING: Cu ALLOY, PLATED WITH Ni CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8 µm (30 µin) OVER Ni TERMINAL FINISH: Sn matte LED LENS: EPOXY MECHANICAL CHARACTERISTICS DURABILITY: 1000 MATING CYCLES ELECTRICAL CHARACTERISTICS CONTACT RESISTANCE: 30 MILLIOHMS MAX OPERATING TEMPERATURE: -40°C TO +85°C Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 11,43 ±0,13 0,45 ±0,01 NO. IDENT. NR. LED 2 LEFT LED 2 LINK LED 1 RIGHT LED 1 RECHTE LED CODE 203329 YELLOW GREEN L1 203330 GREEN YELLOW L2 203331 GREEN GREEN L3 203332 GREEN RED L4 203333 ORANGE/GREEN ORANGE/GREEN L9 Scale Tolerances Information: SCHEMATIC Number; T3DO1 All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. ±0,2 mm (±0,008 inch) if not specified in mm Designation Subject to modification without prior notice. Drawing will not be updated. MOD-JACK-MJIM 8C8T,1x1,INT.MAG.,LED ALIGNED 203328 www.ERNI.com a 01.09.2010 Index Date 1:1 All Dimensions Class MJIM I (1/2) A3 ELECTRICAL SCHEMATIC - 10/100 BASE TX - T3D01 EXTENDED TEMPERATURE RANGE COMPLIANT WITH GR1089 INTRA-BUILDING LIGHTNING SURGE TEST REQUIREMENTS ELEKTRISCHES DIAGRAMM RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENER FUER LEITERPLATTE (BESTUECKUNGSSEITE) TOL ±0.05 [.002] UNLESS NOTED PCB CABLE 1,27 0,05 0,64 0,03 2,54 0,10 0,89 ±0,07 0,04 ±0,00 2 X8 1 1,02 9 10 11 12 8,89 0,35 0, 0, 00 04 ± X4 P2 J2 P3 J3 P6 J6 CT P5 X2 ±0,00 2,54 0,10 0,13 7 5 ±0,0 07 ±0, 0,06 7 X2 ±0,00 3,05 0,12 3,2 0,07 J1 6 8 5 4,06 0,16 1,60 ± 4 3 P1 CT P4 N/C P7 J4,5 GND P8 J7,8 8,18 0,32 1000pF/2KV 4X 75 Ohms 11,43 0,45 13,26 0,52 15,49 0,61 LED SPECIFICATIONS MAGNETICS SPECIFICATIONS @ 25°C AUTO MDIX COMPATIBLE TURNS RATIO: COLOR FARBE Vf Vf If TYP MAX mA YELLOW 2.1 2.5 20 9 10 11 12 CIRCUIT DIAGRAM SCHALTSKIZZE (P1-P2 : J1-J2) 1CT : 1 ±3% (P3-P6 : J3-J6) 1CT : 1 ±3% GREEN 2.2 2.5 20 9 10 11 12 350µH MIN RED 2.25 2.5 20 9 10 11 12 ORANGE/GREEN 2.05/2.2 2.5 20 9 10 G 11 12 G N N OCL (100KHz, 0.1Vrms, 8mA) (P1-P2 : P3-P6) DCR (P1-P2, P3-P6) 1.1 OHMS MAX INSERTION LOSS: 0.1 MHz - 100 MHz -1.1 dB MAX 0.5 MHz - 30 MHz -18 dB MIN 40 MHz -15.5 dB MIN 50 MHz 60 MHz - 80 MHz CROSSTALK (0.1 MHz - 100 MHz): -13.6 dB MIN -12 dB MIN -40 dB TYP COMMON MODE REJECTION 0.1 MHz - 30 MHz: -50 dB TYP 30 MHz - 60 MHz: -40 dB TYP 60 MHz - 100 MHz: ISOLATION: -35 dB TYP 1500 Vrms Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. RETURN LOSS: Tolerances Information: ±0,2 mm (±0,008 inch) if not specified All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Scale in mm Designation Subject to modification without prior notice. Drawing will not be updated. MOD-JACK-MJIM 8C8T,1x1,INT.MAG.,LED ALIGNED 203328 www.ERNI.com a 01.09.2010 Index Date 1:1 All Dimensions Class MJIM I (2/2) A3