Foot alignment Masks (plugs onto MGA) 8 / 20 27XXX Rev ** 24.8mm [0.975"] C4253 (for 8 & 20 pin feet) 28 27.6mm [1.085"] Description: CY8C27XXX POD SSOP56 OCD (CY8C27002-24PVXI). Hirose cable connector with retension mechanism included. Compatible with: XT-PSoC-15-20H-10-01 - Flex cable (to ICE cube) Compatible with the following Non-QFN feet: C4102 - PDIP8 C3845 - SSOP20 foot C3848 - SOIC20 foot C3846 - SSOP28 foot C3849 - SOIC28 foot C4104 - PDIP28 foot C3850 - TQFP44 foot C3847 - SSOP48 foot McMaster/Carr 91185A558 17.4mm [0.687"] CY8C27002-24PVXI 3.6mm [0.140"] C4254 (for 28 pin feet) MGA (female Mini grid array receptacle) Aligment mask (x2), required for 8/20 or 28 pin feet EA-8C27002-NQ-01 Drawing © 2006 IRONWOOD ELECTRONICS, INC. Tele: (800) 404-0204 www.ironwoodelectronics.com 1 Page:____of 2 Status: Released 3:1 Scale:___ Rev: E Drawing: M. Tully Date: 7/20/06 File: EA-8C27002-NQ-01 Dwg Modified: 10/6/06, MT Tolerances: diameters ±0.03mm [±0.001”], PCB perimeters ±0.13mm [±0.005”], PCB thicknesses ±0.18mm [±0.007"], pitches (from true position) ±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005”] unless stated otherwise. Materials and specifications are subject to change without notice. POD clearance, with respect to center of target pattern 1.085" X McMaster/Carr 91185A558 Y To ICE Pod 0.575" A Flex Cable 0.975" Pod B C pitch Mask (if required) Foot Pod perimeter Foot Part number Description Pitch C4102 PDIP8 foot 0.100" C3845 SSOP20 foot C3848 Mask required A B C X Y C4253 0.978" 0.403" 0.377" 0.652" 0.488" 0.65mm C4253 0.865" 0.290" 0.265" 0.652" 0.488" SOIC20 foot 0.050" C4253 0.865" 0.290" 0.265" 0.652" 0.488" C3846 SSOP28 foot 0.65mm C4254 0.865" 0.290" 0.265" 0.652" 0.513" C3849 SOIC28 foot 0.050" C4254 0.865" 0.290" 0.265" 0.652" 0.513" C4104 PDIP28 foot 0.100" C4254 0.978" 0.403" 0.377" 0.652" 0.513" C3850 TQFP44 foot 0.8mm no 0.848" 0.273" 0.248" 0.627" 0.513" C3847 SSOP48 foot 0.100" no 0.848" 0.273" 0.248" 0.627" 0.488" center of target land pattern (SSOP20 shown) With C4104 foot PDIP28 2 Page:____of 2 EA-8C27002-NQ-01 Drawing © 2006 IRONWOOD ELECTRONICS, INC. Tele: (800) 404-0204 www.ironwoodelectronics.com Status: Released 3:1 Scale:___ Rev: E Drawing: M. Tully Date: 7/20/06 File: EA-8C27002-NQ-01 Dwg Modified: 10/6/06, MT Tolerances: diameters ±0.03mm [±0.001”], PCB perimeters ±0.13mm [±0.005”], PCB thicknesses ±0.18mm [±0.007"], pitches (from true position) ±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005”] unless stated otherwise. Materials and specifications are subject to change without notice.