MIL-C-24308 D-Subminiature 557-196 D-Subminiature Solid Banding Backshell with Elliptical Entry 557 T 196 M 2 R1 B 1-04 B Product Series B = Band Supplied (600-052), Omit for None Cable Entry Style T = Top Dash No. (Table III) Basic Part Number 0 = Without EMI Gasket, 1 = With EMI Gasket Finish Symbol (Page 3) Jackscrew Type (Page A-4) Shell Size (Table I) Receptacle Mounting (Table II) F0 = Front Mounting R1-R7 = Rear Mounting F G J H .44 (11.2) .045 (1.1) Typ. 1.50 (38.1) E Connector Retaining Spring RFI/EMI Gasket Optional A D C #4-40 UNC Thread (2 Places) B © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-84 MIL-C-24308 D-Subminiature 557-196 D-Subminiature Solid Banding Backshell with Elliptical Entry TABLE I: SHELL SIZE & CONNECTOR INTERFACE DIMENSIONS Shell Size 1 2 3 4 5 6 Com’l Shell Size Ref E/09 A/15 B/25 C/37 D/50 F/104 D A MAX 1.393 (35.4) 1.706 (43.3) 2.265 (57.5) 2.900 (73.7) 2.800 (71.1) 2.900 (73.7) B MAX .624 (15.8) .624 (15.8) .624 (15.8) .624 (15.8) .750 (19.1) .844 (21.4) C Ref. .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .375 (9.5) .422 (10.7) ±.005 .984 1.312 1.852 2.500 2.406 2.500 (.1) (25.0) (33.3) (47.0) (63.5) (61.1) (63.5) Max Dash No. Table III 03 05 08 12 13 14 TABLE II: RECEPTACLE MOUNTING Dash No. R1 R2 R3 R4 R5 R6 R7 F0 Panel Thickness .031 (.8) .047 (1.2) .062 (1.6) .093 (2.4) .104 (2.6) .125 (3.2) .156 (4.0) N/A E .247 .231 .216 .185 .174 .153 .125 .305 (6.3) (5.9) (5.5) (4.7) (4.4) (3.9) (3.2) (7.7) TABLE III: CABLE ENTRY Dash No. 01 02 03 04 05 06 07 08 09 10 11 12 13 14 F .250 (6.4) .250 (6.4) .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .375 (9.5) .375 (9.5) .375 (9.5) .437 (11.1) .437 (11.1) .550 (14.0) .615 (15.6) G .375 (9.5) .375 (9.5) .438 (11.1) .438 (11.1) .438 (11.1) .438 (11.1) .438 (11.1) .500 (12.7) .500 (12.7) .500 (12.7) .562 (14.3) .562 (14.3) .675 (17.1) .740 (18.8) H 250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.452 (36.9) 2.100 (53.3) 2.000 (50.8) 2.000 (50.8) J .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.577 (40.1) 2.225 (56.4) 2.125 (54.0) 2.425 (61.6) 1. Metric dimensions (mm) are indicated in parentheses. 2. DO NOT USE CONNECTORS WITH FLOAT MOUNTINGS. 3. For front mount, mating connector must be mounted to panel using M24308/26 female screwlocks. For rear mount, use Glenair GK134. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-85