MIL-C-24308 D-Subminiature 557-130 D-Subminiature TAG Ring® Solid Backshell 557-130 M 2 02 G F = Short Strain Relief G = Gland Nut L = Strain Relief Basic Part No. Finish Symbol (Page 3) Cable Entry (Table II) Shell Size (Table I) E D F G Knurl Style Mfr. Option Style G Gland Nut .60 (15.2) Max .42 (10.7) Max Style F Short Strain Relief .98 (24.9) Max F Clip Typ. Connector Shown For Ref. Only A Socket Head Jackscrew Assy (687-169) #4-40 UNC 2 Places Typ. G C .750 (19.1) Max B Style L Strain Relief 1. Metric dimensions (mm) are indicated in parentheses. 2. TAG Ring® nut is aluminum with gold iridite finish. TAG Ring® spring is beryllium copper with gold plating. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-70 MIL-C-24308 D-Subminiature 557-130 D-Subminiature TAG Ring® Solid Backshell TABLE I: SHELL SIZE & CONNECTOR INTERFACE DIMENSIONS Shell Size 1 2 3 4 5 6 A Max 1.25 (31.8) 1.58 (40.1) 2.13 (54.1) 2.77 (70.4) 2.68 (68.1) 2.77 (70.4) B Max .53 (13.5) .53 (13.5) .53 (13.5) .53 (13.5) .66 (16.8) .73 (18.5) C ±.005 .984 1.312 1.852 2.500 2.406 2.500 (.1) (25.0) (33.3) (47.0) (63.5) (61.1) (63.5) Max Dash No. Table II 03 03 03 03 04 05 TABLE II: CABLE ENTRY Dash No. 02 03 04 05 D Entry .25 (6.4) .37 (9.4) .50 (12.7) .62 (15.7) E Dia Max .55 (14.0) .67 (17.0) .80 (20.3) .92 (23.4) F Max .97 (24.6) 1.05 (26.7) 1.16 (29.5) 1.22 (31.0) G - Cable Range Min Max .125 (3.2) .250 (6.4) .250 (6.4) .375 (9.5) .250 (6.4) .438 (11.1) .375 (9.5) .625 (15.9) Metric dimensions (mm) are indicated in parentheses. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-71