ONSEMI BYW29-200

BYW29−200
SWITCHMODEt
Power Rectifiers
This state−of−the−art device is designed for use in switching power
supplies, inverters and as free wheeling diodes.
Features
•
•
•
•
•
•
•
http://onsemi.com
175°C Operating Junction Temperature
Popular TO−220 Package
Epoxy Meets UL 94 V−0 @ 0.125 in
Low Forward Voltage
Low Leakage Current
High Temperature Glass Passivated Junction
Pb−Free Package is Available*
ULTRAFAST
RECTIFIERS
8.0 AMPERES
200 VOLTS
1
Mechanical Characteristics
4
• Case: Epoxy, Molded, Epoxy Meets UL 94 V−0
• Weight: 1.9 Grams (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
•
•
•
3
Leads are Readily Solderable
Lead Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
Device Meets MSL1 Requirements
ESD Ratings: Machine Model, C (> 400 V)
Human Body Model, 3B (> 8000 V)
MARKING
DIAGRAM
4
MAXIMUM RATINGS
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Rating
VRRM
VRWM
VR
200
V
Average Rectified Forward Current
Total Device, (Rated VR),
TC = 150°C
IF(AV)
8.0
A
Peak Repetitive Forward Current
(Rated VR, Square Wave, 20 kHz),
TC = 150°C
IFM
16
A
Nonrepetitive Peak Surge Current
(Surge Applied at Rated Load Conditions
Half−wave, Single Phase, 60 Hz)
IFSM
100
A
TJ, Tstg
−65 to +175
°C
Operating Junction Temperature and
Storage Temperature Range
1
3
A
Y
WW
BYW80−200
G
KA
AY WWG
BYW29−200
KA
= Assembly Location
= Year
= Work Week
= Device Code
= Pb−Free Package
= Diode Polarity
ORDERING INFORMATION
THERMAL CHARACTERISTICS
Maximum Thermal Resistance,
Junction−to−Case
CASE 221B
TO−220B
PLASTIC
RqJC
°C/W
3.0
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
Device
BYW29−200
BYW29−200G
Package
Shipping
TO−220
50 Units/Rail
TO−220
(Pb−Free)
50 Units/Rail
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2005
August, 2005 − Rev. 1
1
Publication Order Number:
BYW29/D
BYW29−200
ELECTRICAL CHARACTERISTICS
Rating
Symbol
Maximum Instantaneous Forward Voltage (Note 1)
(iF = 5.0 A, TC = 100°C)
(iF = 20 A, TC = 25°C)
vF
Maximum Instantaneous Reverse Current (Note 1)
(Rated Dc Voltage, TJ = 100°C)
(Rated Dc Voltage, TJ = 25°C)
iR
Maximum Reverse Recovery Time
(IF = 1.0 A, di/dt = 50 A/ms)
(IF = 0.5 A, iR = 1.0 A, IREC = 0.25 A)
trr
Value
Unit
V
0.85
1.3
mA
600
5.0
ns
35
25
1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.
1000
100
IR, REVERSE CURRENT (m A)
70
50
20
10
100°C
1.0
25°C
0.1
10
0.01
7.0
0
20
80 100 120 140
60
VR, REVERSE VOLTAGE (V)
40
5.0
160
180 200
Figure 2. Typical Reverse Current*
* The curves shown are typical for the highest voltage device in the
grouping. Typical reverse current for lower voltage selections can be
estimated from these same curves if VR is sufficiently below rated VR.
3.0
2.0
TJ = 175°C
100°C
IF(AV) , AVERAGE FORWARD CURRENT (AMPS)
i F , INSTANTANEOUS FORWARD CURRENT (AMPS)
30
TJ = 175°C
100
25°C
1.0
0.7
0.5
0.3
0.2
0.1
0.2 0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
10
RATED VR APPLIED
9.0
8.0
dc
7.0
6.0
SQUARE WAVE
5.0
4.0
3.0
2.0
1.0
0
140
vF, INSTANTANEOUS VOLTAGE (V)
150
160
170
TC, CASE TEMPERATURE (°C)
Figure 1. Typical Forward Voltage
Figure 3. Current Derating, Case
http://onsemi.com
2
180
RqJA = 16°C/W
RqJA = 60°C/W
(NO HEAT SINK)
12
dc
10
SQUARE WAVE
8.0
6.0
4.0
dc
2.0
SQUARE WAVE
0
0
r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED)
PF(AV), AVERAGE POWER DISSIPATION (WATTS
14
20
40
60
80
100
120
140
160
180
200
10
9.0
TJ = 175°C
8.0
7.0
SQUARE WAVE
6.0
dc
5.0
4.0
3.0
2.0
1.0
0
0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
TA, AMBIENT TEMPERATURE (°C)
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 4. Current Derating, Ambient
Figure 5. Power Dissipation
1.0
D = 0.5
0.5
0.2
0.1
0.1
0.05
0.01
ZqJC(t) = r(t) RqJC
RqJC = 1.5 °C/W MAX
P(pk)
0.05
t2
SINGLE PULSE
TJ(pk) − TC = P(pk) ZqJC(t)
DUTY CYCLE, D = t1/t2
0.02
0.01
0.01
D CURVES APPLY FOR POWER
PULSE TRAIN SHOWN
READ TIME AT T1
t1
0.02
0.05
0.1
0.2
0.5
1.0
2.0
5.0
10
20
50
t, TIME (ms)
Figure 6. Thermal Response
1000
C, CAPACITANCE (pF)
IF(AV) , AVERAGE FORWARD CURRENT (AMPS)
BYW29−200
TJ = 25°C
300
100
30
10
1.0
10
VR, REVERSE VOLTAGE (V)
Figure 7. Typical Capacitance
http://onsemi.com
3
100
100
200
500
1000
10
BYW29−200
PACKAGE DIMENSIONS
TO−220
CASE 221B−04
ISSUE D
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
C
B
Q
F
T
S
DIM
A
B
C
D
F
G
H
J
K
L
Q
R
S
T
U
4
A
1
U
3
H
K
L
R
D
G
J
INCHES
MIN
MAX
0.595
0.620
0.380
0.405
0.160
0.190
0.025
0.035
0.142
0.147
0.190
0.210
0.110
0.130
0.018
0.025
0.500
0.562
0.045
0.060
0.100
0.120
0.080
0.110
0.045
0.055
0.235
0.255
0.000
0.050
MILLIMETERS
MIN
MAX
15.11
15.75
9.65
10.29
4.06
4.82
0.64
0.89
3.61
3.73
4.83
5.33
2.79
3.30
0.46
0.64
12.70
14.27
1.14
1.52
2.54
3.04
2.04
2.79
1.14
1.39
5.97
6.48
0.000
1.27
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
Literature Distribution Center for ON Semiconductor
USA/Canada
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Phone: 81−3−5773−3850
Email: [email protected]
http://onsemi.com
4
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
For additional information, please contact your
local Sales Representative.
BYW29−200/D