NUD3112 Integrated Relay, Inductive Load Driver This device is used to switch inductive loads such as relays, solenoids incandescent lamps, and small DC motors without the need of a free−wheeling diode. The device integrates all necessary items such as the MOSFET switch, ESD protection, and Zener clamps. It accepts logic level inputs thus allowing it to be driven by a large variety of devices including logic gates, inverters, and microcontrollers. http://onsemi.com Relay, Inductive Load Driver Silicon SMALLBLOCK 0.5 Ampere, 16 V Clamp Features • Provides a Robust Driver Interface Between D.C. Relay Coil and • • • • • • Sensitive Logic Circuits Optimized to Switch Relays of 12 V Rail Capable of Driving Relay Coils Rated up to 6.0 W at 12 V Internal Zener Eliminates the Need of Free−Wheeling Diode Internal Zener Clamp Routes Induced Current to Ground for Quieter Systems Operation Low VDS(ON) Reduces System Current Drain Pb−Free Package is Available MARKING DIAGRAMS 3 1 JW5 D 2 SOT−23 CASE 318 STYLE 21 6 Typical Applications • Telecom: Line Cards, Modems, Answering Machines, FAX • Computers and Office: Photocopiers, Printers, Desktop Computers • Consumer: TVs and VCRs, Stereo Receivers, CD Players, Cassette 5 JW5 = Specific Device Code D = Date Code 4 JW5 D 2 1 3 SC−74 CASE 318F STYLE 7 Recorders • Industrial: Small Appliances, Security Systems, Automated Test JW5 = Specific Device Code D = Date Code Equipment, Garage Door Openers INTERNAL CIRCUIT DIAGRAMS Drain (3) Gate (1) 1.0 k Drain (6) Gate (2) Drain (3) 1.0 k 300 k 300 k Source (2) 300 k Source (1) CASE 318 Gate (5) 1.0 k Source (4) CASE 318F ORDERING INFORMATION Device Package Shipping† NUD3112LT1 SOT−23 3000/Tape & Reel NUD3112LT1G SOT−23 (Pb−Free) 3000/Tape & Reel NUD3112DMT1 SC−74 3000/Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. Semiconductor Components Industries, LLC, 2004 June, 2004 − Rev. 6 1 Publication Order Number: NUD3112/D NUD3112 MAXIMUM RATINGS (TJ = 25°C unless otherwise specified) Symbol Rating Value Unit VDSS Drain to Source Voltage – Continuous 14 Vdc VGS Gate to Source Voltage – Continuous 6 Vdc ID Drain Current – Continuous 500 mA Ez Single Pulse Drain−to−Source Avalanche Energy (TJinitial = 25°C) 50 mJ TJ Junction Temperature 150 °C TA Operating Ambient Temperature −40 to 85 °C Tstg Storage Temperature Range −65 to +150 °C PD Total Power Dissipation (Note 1) Derating Above 25°C SOT−23 225 1.8 mW mW/°C PD Total Power Dissipation (Note 1) Derating Above 25°C SC−74 380 3.0 mW mW/°C SOT−23 SC−74 556 329 °C/W 2000 V RJA Thermal Resistance Junction−to−Ambient (Note 1) ESD Human Body Model (HBM) According to EIA/JESD22/A114 1. Mounted onto minimum pad board. TYPICAL ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit OFF CHARACTERISTICS VBRDSS Drain to Source Sustaining Voltage (Internally Clamped) (ID = 10 mA) 14 16 17 V BVGSO Ig = 1.0 mA − − 8 V Drain to Source Leakage Current (VDS = 12 V , VGS = 0 V, TA = 25°C) (VDS = 12 V, VGS = 0 V, TA = 85°C) − − − − 20 40 A Gate Body Leakage Current (VGS = 3.0 V, VDS = 0 V) (VGS = 5.0 V, VDS = 0 V) − − − − 35 65 A Gate Threshold Voltage (VGS = VDS, ID = 1.0 mA) (VGS = VDS, ID = 1.0 mA, TA = 85°C) 0.8 0.8 1.2 − 1.4 1.4 V Drain to Source On−Resistance (ID = 250 mA, VGS = 3.0 V) (ID = 500 mA, VGS = 3.0 V) (ID = 500 mA, VGS = 5.0 V) (ID = 500 mA, VGS = 3.0 V, TA=85°C) (ID = 500 mA, VGS = 5.0 V, TA=85°C) − − − − − − − − − − 1.2 1.3 0.9 1.3 0.9 300 200 400 − − − mA 350 490 − mmhos IDSS IGSS ON CHARACTERISTICS VGS(th) RDS(on) IDS(on) gFS Output Continuous Current (VDS = 0.25 V, VGS = 3.0 V) (VDS = 0.25 V, VGS = 3.0 V, TA = 85°C) Forward Transconductance (VOUT = 12.0 V, IOUT = 0.25 A) http://onsemi.com 2 NUD3112 TYPICAL ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol Characteristic Min Typ Max Unit DYNAMIC CHARACTERISTICS Ciss Input Capacitance (VDS = 12 V, VGS = 0 V, f = 10 kHz) − 23 − pF Coss Output Capacitance (VDS = 12 V, VGS = 0 V, f = 10 kHz) − 30 − pF Crss Transfer Capacitance (VDS = 12.0 V, VGS = 0 V, f = 10 kHz) − 7 − pF Min Typ Max Units Propagation Delay Times: High to Low Propagation Delay; Figure 1 (VDS = 12 V, VGS = 5.0 V) Low to High Propagation Delay; Figure 1 (VDS = 12 V, VGS = 5.0 V) − − 21 91 − − Transition Times: Fall Time; Figure 1 (VDS = 12 V, VGS = 5.0 V) Rise Time; Figure 1 (VDS = 12 V, VGS = 5.0 V) − − 36 61 − − SWITCHING CHARACTERISTICS Symbol tPHL tPLH tf tr Characteristic nS nS VIH Vin 50% 0V tPHL tPLH VOH 90% Vout 50% 10% VOL tr tf Figure 1. Switching Waveforms http://onsemi.com 3 NUD3112 TYPICAL PERFORMANCE CURVES (TJ = 25°C unless otherwise specified) 1 VGS = 5.0 V VDS = 0.8 V VGS = 3.0 V 0.1 VGS = 2.0 V 0.01 VGS = 1.5 V I D, DRAIN CURRENT (A) I D, DRAIN CURRENT (A) 1 0.001 VGS = 1.0 V 0.0001 0.00001 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 VDS, DRAIN−TO−SOURCE VOLTAGE (V) 0.1 0.01 125°C 0.001 85°C 25°C 0.0001 0.00001 0.8 0.5 −40°C 1.0 1200 1000 800 ID = 0.25 A VGS = 3.0 V ID = 0.5 A VGS = 3.0 V ID = 0.5 A VGS = 5.0 V 600 400 200 0 −50 −25 0 50 25 75 TEMPERATURE (°C) 100 125 4500 3500 3000 2500 125°C 25°C −40°C 1500 1000 500 0 0.6 0.8 1 1.2 1.4 VGS, GATE−TO−SOURCE VOLTAGE (V) 1.6 Figure 5. RDS(ON) Variation vs. Gate−to−Source Voltage 21 IZ = 10 mA V Z , ZENER CLAMP VOLTAGE (V) V Z , ZENER VOLTAGE (V) 85°C 2000 15.98 15.94 15.92 15.90 15.88 15.86 15.84 15.82 15.80 −50 ID = 250 A 4000 Figure 4. On−Resistance Variation vs. Temperature 15.96 5.0 Figure 3. Transfer Function RDS(on), DRAIN−TO−SOURCE RESISTANCE () RDS(on), DRAIN−TO−SOURCE RESISTANCE (m) Figure 2. Output Characteristics 1.5 2.0 2.5 3.0 3.5 4.0 4.5 VGS, GATE−TO−SOURCE VOLTAGE (V) −25 0 50 75 25 TEMPERATURE (°C) 100 125 20 19 18 17 16 15 85°C 25°C 14 −40°C 13 0.1 Figure 6. Zener Voltage vs. Temperature 1 10 100 IZ, ZENER CURRENT (mA) 1000 Figure 7. Zener Clamp Voltage vs. Zener Current http://onsemi.com 4 NUD3112 45 1.2 1.1 VGS = 3.0 V 1 125°C 0.9 85°C 40 IGSS, GATE LEAKAGE (A) RDS(on), DRAIN−TO−SOURCE RESISTANCE () TYPICAL PERFORMANCE CURVES (TJ = 25°C unless otherwise specified) 0.8 0.7 0.6 25°C −40°C 0.5 35 30 25 VGS = 5.0 V 20 15 VGS = 3.0 V 10 5 0 −50 0.4 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 ID, DRAIN CURRENT (A) Figure 8. On−Resistance vs. Drain Current and Temperature −25 0 50 25 75 TEMPERATURE (°C) 100 Figure 9. Gate Leakage vs. Temperature +12V Relay +5V / 3.3V 1.0 k clamp Zener Logic ESD Zener 300 k ESD Zener Figure 10. Typical Application Circuit http://onsemi.com 5 clamp Zener 125 NUD3112 PACKAGE DIMENSIONS SOT−23 (TO−236) CASE 318−08 ISSUE AH NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. 318−03 AND −07 OBSOLETE, NEW STANDARD 318−08. A L 3 1 V B S 2 DIM A B C D G H J K L S V G C D H K J INCHES MIN MAX 0.1102 0.1197 0.0472 0.0551 0.0350 0.0440 0.0150 0.0200 0.0701 0.0807 0.0005 0.0040 0.0034 0.0070 0.0140 0.0285 0.0350 0.0401 0.0830 0.1039 0.0177 0.0236 STYLE 21: PIN 1. GATE 2. SOURCE 3. DRAIN SOLDERING FOOTPRINT* 0.95 0.037 0.95 0.037 2.0 0.079 0.9 0.035 0.8 0.031 SCALE 10:1 mm inches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 6 MILLIMETERS MIN MAX 2.80 3.04 1.20 1.40 0.89 1.11 0.37 0.50 1.78 2.04 0.013 0.100 0.085 0.177 0.35 0.69 0.89 1.02 2.10 2.64 0.45 0.60 NUD3112 PACKAGE DIMENSIONS SC−74 CASE 318F−05 ISSUE K NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. 318F−01, −02, −03 OBSOLETE. NEW STANDARD 318F−04. A L 6 5 4 2 3 B S 1 DIM A B C D G H J K L M S D G M J C 0.05 (0.002) K H INCHES MIN MAX 0.1142 0.1220 0.0512 0.0669 0.0354 0.0433 0.0098 0.0197 0.0335 0.0413 0.0005 0.0040 0.0040 0.0102 0.0079 0.0236 0.0493 0.0649 0 10 0.0985 0.1181 STYLE 7: PIN 1. SOURCE 1 2. GATE 1 3. DRAIN 2 4. SOURCE 2 5. GATE 2 6. DRAIN 1 RECOMMENDED FOOTPRINT 2.4 0.094 0.95 0.037 1.9 0.074 0.95 0.037 0.7 0.028 1.0 0.039 SCALE 10:1 http://onsemi.com 7 mm inches MILLIMETERS MIN MAX 2.90 3.10 1.30 1.70 0.90 1.10 0.25 0.50 0.85 1.05 0.013 0.100 0.10 0.26 0.20 0.60 1.25 1.65 0 10 2.50 3.00 NUD3112 SMALLBLOCK is a trademark of Semiconductor Components Industries, LLC (SCILLC). ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 http://onsemi.com 8 For additional information, please contact your local Sales Representative. NUD3112/D