Ordering number : ENN7077 MCH6611 P-Channel Silicon MOSFET MCH6611 Ultrahigh-Speed Switching Applications Preliminary • • • Low ON-resistance. unit : mm Ultrahigh-speed switching. 2173A 4V drive. Composite type with 2 MOSFETs contained in a single package, facilitating high-density mounting. [MCH6611] 0.25 • Package Dimensions 0.3 5 6 3 2 0.65 1 0.15 1.6 0.25 2.1 4 0.07 Features 6 5 4 1 2 3 0.85 2.0 1 : Source1 2 : Gate1 3 : Drain2 4 : Source2 5 : Gate2 6 : Drain1 Specifications SANYO : MCPH6 Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Drain-to-Source Voltage VDSS --50 V Gate-to-Source Voltage VGSS ±20 V Drain Current (DC) ID Drain Current (Pulse) PW≤10µs, duty cycle≤1% --0.28 A --1.1 A Allowable Power Dissipation IDP PD 0.8 W Channel Temperature Tch 150 °C Storage Temperature Tstg --55 to +150 °C Mounted on a ceramic board (900mm 2✕0.8mm)1unit Electrical Characteristics at Ta=25°C Parameter Symbol Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance V(BR)DSS IDSS IGSS Conditions ID=--1mA, VGS=0 VDS=--50V, VGS=0 VGS=±16V, VDS=0 VGS(off) yfs VDS=--10V, ID=--100µA VDS=--10V, ID=--70mA RDS(on)1 RDS(on)2 ID=--70mA, VGS=--10V ID=--40mA, VGS=--4V Ratings min typ max --50 V --1 120 Marking : FK Unit --10 µA ±10 µA --2.5 160 V mS 4.7 6.1 Ω 6.5 9.1 Ω Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN O1501 TS IM TA-2466 No.7077-1/4 MCH6611 Continued from preceding page. Parameter Symbol Ratings Conditions min typ Unit max Input Capacitance Ciss pF Coss VDS=--10V, f=1MHz VDS=--10V, f=1MHz 23 Output Capacitance 11 pF Reverse Transfer Capacitance Crss VDS=--10V, f=1MHz 4 pF Turn-ON Delay Time td(on) See specified Test Circuit. 13 ns Rise Time tr td(off) See specified Test Circuit. 10 ns See specified Test Circuit. 190 ns tf See specified Test Circuit. 95 ns Turn-OFF Delay Time Fall Time Total Gate Charge Qg VDS=--10V, VGS=--10V, ID=--140mA 1.68 nC Gate-to-Source Charge Qgs VDS=--10V, VGS=--10V, ID=--140mA 0.22 nC Gate-to-Drain “Miller” Charge Qgd VDS=--10V, VGS=--10V, ID=--140mA 0.43 Diode Forward Voltage VSD IS=--140mA, VGS=0 0.83 Switching Time Test Circuit nC 1.2 V Electrical Connection VDD= --25V VIN 0V --10V D1 G2 S2 S1 G1 D2 ID= --70mA RL=357Ω VOUT VIN D PW=10µs D.C.≤1% G S ID -- VDS 0V VDS= --10V --0.25 --10 . --0.1 --3.0V --0.08 --0.06 --0.04 --0.20 °C 25 Drain Current, ID -- A 0V --0.12 ID -- VGS --0.30 --4 . --8. 0 --6. 0 V V --0.14 Drain Current, ID -- A MCH6611 50Ω Ta= -25°C 75°C P.G --0.15 --0.10 VGS= --2.5V --0.05 --0.02 0 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 --1.4 --1.6 Drain-to-Source Voltage, VDS -- V --2 --3 VGS= --10V Static Drain-to-Source On-State Resistance, RDS(on) -- Ω 7 ID= --40mA 5 4 3 --3 --4 --5 --6 --7 --8 Gate-to-Source Voltage, VGS -- V --9 --10 IT00264 --5 IT00263 RDS(on) -- ID 10 --70mA --4 Gate-to-Source Voltage, VGS -- V Ta=25°C 8 2 --2 --1 IT00262 9 6 0 --2.0 RDS(on) -- VGS 10 Static Drain-to-Source On-State Resistance, RDS(on) -- Ω --1.8 7 Ta=75°C 5 25°C --25°C 3 2 1.0 --0.01 2 3 5 7 --0.1 Drain Current, ID -- A 2 3 5 IT00265 No.7077-2/4 MCH6611 RDS(on) -- ID 100 Static Drain-to-Source On-State Resistance, RDS(on) -- Ω 5 3 2 10 Ta=75°C 7 5 --25°C 3 25°C 2 1.0 --0.01 2 3 5 7 2 --0.1 3 Drain Current, ID -- A 40m = -ID 6 10V -S= A, VG 70m -I D= 4 2 --40 --20 0 20 40 80 60 100 120 140 Ambient Temperature, Ta -- °C 160 IT00267 IF -- VSD --1.0 VDS= --10V 7 -S= , VG A 8 0 --60 5 VGS=0 7 5 5 Forward Current, IF -- A Forward Transfer Admittance, yfs -- S 4V IT00266 yfs -- ID 1.0 10 3 2 Ta= C --25° 75°C 0.1 C 25° 7 5 3 3 2 Ta=7 5°C 25°C --25° C Static Drain-to-Source On-State Resistance, RDS(on) -- Ω 7 --0.1 7 5 3 2 2 0.01 --0.01 3 2 5 7 3 2 --0.1 Drain Current, ID -- A --0.01 --0.2 5 td(on) 10 7 5 --1.2 --1.4 IT00269 f=1MHz 5 3 2 --1.0 7 3 Ciss, Coss, Crss -- pF 100 7 5 --0.8 Ciss, Coss, Crss -- VDS 100 td(off) tf 2 --0.6 Diode Forward Voltage, VSD -- V VDD= --25V VGS= --10V 3 --0.4 IT00268 SW Time -- ID 1000 7 5 Switching Time, SW Time -- ns RDS(on) -- Ta 12 VGS= --4V tr Ciss 2 10 Coss 7 5 Crss 3 3 2 2 1.0 1.0 --0.01 --0.1 Drain Current, ID -- A 2 7 2 --0 3 IDP= --1.1A <10µs 1m s Drain Current, ID -- A 7 --6 --5 --4 --3 5 3 7 5 --1 2 0.6 0.8 1.0 1.2 1.4 Total Gate Charge, Qg -- nC 1.6 1.8 2.0 IT00272 ms 10 DC --0.1 3 --0 10 ID= --0.28A 2 --2 0.4 ASO --1.0 --7 0.2 --10 --15 --20 --25 --30 --35 --40 --45 --50 Drain-to-Source Voltage, VDS -- V IT00271 2 VDS= --10V --9 I = --140mA D --8 0 --5 IT00270 VGS -- Qg --10 Gate-to-Source Voltage, VGS -- V 5 3 Operation in this area is limited by RDS(on). 0m s op era tio n Ta=25°C Single pulse Mounted on a ceramic board(900mm2✕0.8mm)1unit --0.01 --1.0 2 3 5 7 --10 2 3 Drain-to-Source Voltage, VDS -- V 5 7 IT03643 No.7077-3/4 MCH6611 PD -- Ta Allowable Power Dissipation, PD -- W 1.0 0.8 M ou nt 0.6 ed on ac era m ic bo ard 0.4 (9 00 m m2 ✕0 .8m 0.2 m )1 un it 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT03637 Note on usage : Since the MCH6611 is designed for high-speed switching applications, please avoid using this device in the vicinity of highly charged objects. Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of October, 2001. Specifications and information herein are subject to change without notice. PS No.7077-4/4