FAIRCHILD MM74C908N

Revised January 1999
MM74C908
Dual CMOS 30-Volt Relay Driver
General Description
The MM74C908 is a general purpose dual high voltage
driver capable of sourcing a minimum of 250 mA at VOUT =
VCC − 3V, and TJ = 65°C.
The MM74C908 consists of two CMOS NAND gates driving an emitter follower Darlington output to achieve high
current drive and high voltage capabilities. In the “OFF”
state the outputs can withstand a maximum of −30V across
the device. These CMOS drivers are useful in interfacing
normal CMOS voltage levels to driving relays, regulators,
lamps, etc.
Features
■ Wide supply voltage range:
■ High noise immunity:
3V to 18V
0.45 VCC (typ.)
■ Low output “ON” resistance: 8Ω (typ.)
■ High voltage: −30V
■ High current: 250 mA
Ordering Code:
Order Number
MM74C908N
Package Number
N08E
Package Description
8-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide
Connection Diagram
Pin Assignments for DIP
Top View
© 1999 Fairchild Semiconductor Corporation
DS005912.prf
www.fairchildsemi.com
MM74C908 Dual CMOS 30-Volt Relay Driver
October 1987
MM74C908
Absolute Maximum Ratings(Note 1)
Voltage at any Input Pin
Lead Temperature (TL)
(Soldering, 10 seconds)
−0.3V to VCC +0.3V
Voltage at any Output Pin
Power Dissipation (PD)
32V
Dissipation vs Ambient
−40°C to +85°C
Operating Temperature Range
Operating VCC Range
Temperature Graph
4V to 18V
19V
Absolute Maximum VCC
Note 1: “Absolute Maximum Ratings” are those values beyond which the
safety of the device cannot be guaranteed. Except for “Operating Temperature Range” they are not meant to imply that the devices should be operated at these limits. The Electrical Characteristics table provides conditions
for actual device operation.
500 mA
ISOURCE
+150°C
Storage Temperature
−65°C to +150°C
Range (TS)
260°C
Refer to Maximum Power
DC Electrical Characteristics
Min/Max limits apply across temperature range, unless otherwise noted
Symbol
Parameter
Conditions
Min
Typ
Max
Units
CMOS TO CMOS
VIN(1)
VIN(0)
Logical “1” Input Voltage
Logical “0” Input Voltage
VCC = 5V
3.5
V
VCC = 10V
8.0
V
VCC = 5V
1.5
VCC = 10V
2.0
V
1.0
µA
VCC = 15V, VIN = 15V
IIN(1)
Logical “1” Input Current
IIN(0)
Logical “0” Input Current
VCC = 15V, VIN = 0V
ICC
Supply Current
VCC = 15V, Outputs Open Circuit
0.05
Output “OFF” Voltage
VIN = VCC, IOUT = −200 µA
−30
0.005
−1.0
−0.005
V
µA
15
µA
V
CMOS/LPTTL INTERFACE
VIN(1)
Logical “1” Input Voltage
VCC = 4.75V
VIN(0)
Logical “0” Input Voltage
VCC = 4.75V
VCC − 1.5
V
0.8
V
OUTPUT DRIVE
VOUT
RON
Output Voltage
Output Resistance
IOUT = −300 mA, VCC ≥ 5V, TJ = 25°C
VCC−2.7
VCC−1.8
V
IOUT = −250 mA, VCC ≥ 5V, TJ = 65°C
VCC−3.0
VCC−1.9
V
IOUT = −175 mA, VCC ≥ 5V, TJ = 150°C
VCC−3.15
VCC−2.0
IOUT = −300 mA, VCC ≥ 5V, TJ = 25°C
6.0
IOUT = −250 mA, VCC ≥ 5V, TJ = 65°C
IOUT = −175 mA, VCC ≥ 5V, TJ = 150°C
Output Resistance
V
9.0
Ω
7.5
12
Ω
10
18
Ω
0.55
0.80
%/°C
Coefficient
θJA
Thermal Resistance
(Note 2)
100
110
°C/W
MM74C908
(Note 2)
45
55
°C/W
Typ
Max
Units
150
300
ns
65
120
ns
2.0
10
µs
4.0
20
µs
Note 2: θJA measured in free air with device soldered into printed circuit board.
AC Electrical Characteristics
Symbol
tpd1
(Note 3)
Parameter
Conditions
Propagation Delay
VCC = 5V, RL = 50Ω,
to a Logical “1”
CL = 50 pF, TA = 25°C
VCC = 10V, RL = 50Ω,
Min
CL = 50 pF, TA = 25°C
tpd0
Propagation Delay
VCC = 5V, RL = 50Ω,
to a Logic “0”
CL = 50 pF, TA = 25°C
VCC = 10V, RL = 50Ω,
CL = 50 pF, TA = 25°C
CIN
Input Capacitance
(Note 4)
5.0
Note 3: AC Parameters are guaranteed by DC correlated testing.
Note 4: Capacitance is guaranteed by periodic testing.
www.fairchildsemi.com
2
pF
MM74C908
Typical Performance Characteristics
Maximum Power Dissipation
vs Ambient Temperature
Typical IOUT vs
Typical VOUT
Maximum VCC − VOUT vs IOUT
Typical IOUT vs Typical VOUT
Typical IOUT vs Typical VOUT
AC Test Circuit
Switching Time Waveforms
tr = tf = 20 ns
3
www.fairchildsemi.com
MM74C908
Power Considerations
Calculating Output “ON” Resistance (RL > 18Ω)
Equations (1), (4), and (6b) can be used in an iterative
method to determine the output current, output resistance
and junction temperature.
The output “ON” resistance, RON, is a function of the junction temperature, TJ, and is given by:
RON = 9 (TJ − 25) (0.008) + 9:
(1)
and TJ is given by:
TJ = TA + PDAV θJA,:
(2)
where TA = ambient temperature, θJA = thermal resistance,
and PDAV is the average power dissipated within the
device. PDAV consists of normal CMOS power terms (due
to leakage currents, internal capacitance, switching, etc.)
which are insignificant when compared to the power dissipated in the outputs. Thus, the output power term defines
the allowable limits of operation and includes both outputs,
A and B. PD is given by:
PD = IOA2RON + IOB2 RON,
(3)
where IO is the output current, given by:
For example, let VCC = 15V, RLA = 100Ω, RLB = 100Ω,
VL = 0V, TA = 25°C, θJA = 110°C/W, Duty CycleA = 50%,
Duty CycleB = 75%.
(4)
VL is the load voltage.
Assuming RON = 11Ω, then:
The average power dissipation, PDAV, is a function of the
duty cycle:
PDAV = IOA2RON (Duty CycleA) +
(5)
IOB2 RON(Duty CycleB)
where the duty cycle is the % time in the current source
state. Substituting equations (1) and (5) into (2) yields:
TJ = TA + θJA [9 (TJ − 25) (0.008) + 9]: (6a)
and
[IOA2 (Duty CycleA) + IOB2 (Duty CycleB)]
simplifying:
and RON = 9 (TJ − 25) (0.008) + 9
= 9(52.6 − 25) (0.008) + 9 = 11Ω
Applications
(See AN-177 for applications)
www.fairchildsemi.com
4
8-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide
Package Number N08E
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
1. Life support devices or systems are devices or systems
device or system whose failure to perform can be reawhich, (a) are intended for surgical implant into the
sonably expected to cause the failure of the life support
body, or (b) support or sustain life, and (c) whose failure
device or system, or to affect its safety or effectiveness.
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
www.fairchildsemi.com
user.
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications.
MM74C908 Dual CMOS 30-Volt Relay Driver
Physical Dimensions inches (millimeters) unless otherwise noted