MB105 F thru M B110F Miniature Glass Passivated Single-Phase Surface Mount Flat Bridge Rectifier VOLTAGE - 50 TO 1000 VOLTS CURRENT - 1.0 AMPERES Major Ratings and Characteristics IF(AV) 1.0A VRRM 50-1000V IFSM 35 A IR 5.0 μA VF 1.0V Tj max. 150 °C FEATURES ● ● ● ● ● ● ● ● Low profile space Ideal for automated placement Glass passivated chip junction Low forward voltage drop Low leakage current High forward surge capability High temperature soldering： 260℃/10 seconds at terminals Component in accordance to RoHS 2002/95/1 and WEEE 2002/96/EC MECHANICAL DATA ● ● ● Case: MBF Molded plastic over glass passivated chip Terminals: Solder plated, solderable per J-STD-002B and JESD22-B102D Polarity: Polarity symbols marked on body MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) Symbol MB105F MB11F MB12F MB14F MB16F MB18F MB110F UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage Maximum average forward output rectified current at TA=30℃ Peak forward surge current 8.3 ms single half sinewave superimposed on rated load(JEDEC Method) VDC 50 100 200 400 600 800 1000 V IF(AV) 1.0 A IFSM 35 A VF 1.1 V IR 5.0 100 μA CJ 13 pF RθJA 70 20 ℃/ W –55 to +150 ℃ Maximum instantaneous forwad voltage drop per leg at 1.0A Maximum DC reverse current at TA = 25 ℃ rated DC blocking voltage per leg TA = 125℃ Typical junction capacitance per leg at 4.0 V ,1MHz Thermal resistance per leg (NOTE 1) RθJL Operating junction and storage temperature range TJ, TSTG NOTE1: Units mounted on P.C.B. with 0.05×0.05″(1.3×1.3mm) pads www.paceleader.tw 1 MB105 F thru M B110F Miniature Glass Passivated Single-Phase Surface Mount Flat Bridge Rectifier VOLTAGE - 50 TO 1000 VOLTS CURRENT - 1.0 AMPERES Characteristic Curves (TA=25 ℃ unless otherwise noted) www.paceleader.tw 2