SDAD102 F Series Solid State Devices, Inc. 2,500 to 15,000 VOLTS FAST RECOVERY STACKABLE HIGH VOLTAGE RECTIFIER 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Designer’s Data Sheet Part Number/Ordering Information 1/ SDAD10 2 __ __ __ __ 2/ │ │ │ │ └ Screening │ │ │ │ │ │ │ │ │ │ │ └ │ │ │ │ │ │ │ └ FEATURES: Stackable to 600 kV+ PIV 2.5 kV to 15 kV High Current Ratings Fast Reverse Recovery Time Only Hermetically Sealed Rectifiers Used Controlled Avalanche Rated Modular Design for Easy Stacking Storage and Operating Temps -65°C to +150°C Available in Standard, Ultra Fast and Hyper Fast Versions Replacement Upgrade- Microsemi / Unitrode types UDF-2.5 through UDC-15 TX, TXV, and S-Level Screening Available 2/ __ = Not Screened │ │ TX = TX Level │ │ TXV = TXV Level │ │ S = S Level │ │ │ └ Reverse Recovery Time │ F = Fast Recovery Time └ Voltage 2.5 = 2.5kV, 5 = 5kV, 7.5 = 7.5kV, 10 = 10kV, and 15 = 15kV Power Rating (See Below) Package Size = 2 Inches Diameter ELECTRICAL CHARACTERISTICS 3/ 25 C Reverse Recover y Time 5/ Max (ns) 25 C 75 C 50 C 2.5 2.5 5.0 5.0 5.0 7.5 7.5 10 15 500 500 500 500 500 500 500 500 500 4.50 2.25 3.30 1.50 1.20 1.00 0.90 0.75 0.50 5.30 5.00 150 3.30 2.80 80 4.40 4.00 150 2.00 1.85 80 1.70 1.50 25 1.50 1.25 80 1.25 1.10 25 1.00 0.90 25 0.70 0.60 25 High Current Versions 10.6 10.0 200 8.80 8.00 200 3.00 2.50 125 2.00 1.80 100 1.40 1.20 100 Peak Inverse Voltage Part Number SDAD102 F 2.5 F SDAD102 D 2.5 F SDAD102 F 5.0 F SDAD102 D 5.0 F SDAD102 C 5.0 F SDAD102 D 7.5 F SDAD102 C 7.5 F SDAD102 C 10 F SDAD102 C 15 F SDAD102 H 2.5 F SDAD102 H 5.0 F SDAD102 H 7.5 F SDAD102 H 10 F SDAD102 H 15 F PIV (KV) 2.5 5.0 7.5 10 15 500 500 500 500 500 Average DC Output Current 4/ Tc = Case Temperature Surge Nonrepetitive If(avg) Ifsm 9.00 6.60 2.00 1.50 1.00 60 C Maximum Forward Voltage Drop Vf (V) 100 C If (A) 25 C Maximum Leakage Current @PIV Replacement Part Number Ir (uA) 25 C 6.0 6.0 11 11 10 17 15 20 30 2.2 1.2 1.6 0.75 0.70 0.50 0.50 0.37 0.25 10 5 10 5 2 5 2 2 2 UDF-2.5 UDD-2.5 UDF-5 UDD-5 UDC-5 UDD-7.5 UDC-7.5 UDC-10 UDC-15 4.05 7.20 9.6 12.0 17.2 7.0 5.0 1.7 1.3 0.8 20 20 10 10 10 ----------- SDAD102 Package: NOTES: 1/ For Ordering Information, Price, Curves, and Availability- Contact Factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. 4/ Tc = 50 ºC typical operation in oil. Tc = 75 ºC is typical ambient Ta = 25 ºC unheatsunk. Tc = 60 ºC typical operation with extender plates in air. 5/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp rec. to .25 Amp. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RA0086B DOC