SDAD101 F Series Solid State Devices, Inc. 2,500 to 15,000 VOLTS FAST RECOVERY STACKABLE HIGH VOLTAGE RECTIFIER 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Designer’s Data Sheet Part Number/Ordering Information 1/ SDAD10 1 __ __ __ __ └ Screening 2/ │ │ │ │ FEATURES: Stackable to 600 kV+ PIV 2.5 kV to 15 kV Fast Reverse Recovery Time Only Hermetically Sealed Rectifiers Used Controlled Avalanche Rated Modular Design for Easy Stacking Storage and Operating Temps -65°C to +150°C Available in Standard, Ultra Fast and Hyper Fast Versions TX, TXV, and S-Level Screening Available2/ Replacement Upgrade – Microsemi / Unitrode Types UFB2.5 Through UFS10 __ = Not Screened │ │ │ │ TX = TX Level │ │ │ │ TXV = TXV Level │ │ │ S = S Level │ │ │ │ │ │ └ Reverse Recovery Time │ │ │ F = Fast Recovery Time │ │ │ └ Voltage 2.5 = 2.5kV, 5 = 5kV, │ 7.5 = 7.5kV, 10 = 10kV, and │ │ 15 = 15kV └ │ Power Rating (See Below) │ └ Package Size = 1 Inch Diameter ELECTRICAL CHARACTERISTICS3/ Peak Inverse Voltage Reverse Recovery 5/ Time PIV (KV) Max (ns) Part Number Average DC 4/ Output Current Surge Nonrepetitive Tc = Case Temperature If(avg) 25 C 25 C 75 C SDAD101 B 2.5 F SDAD101 B 5.0 F SDAD101 S 5.0 F SDAD101 B 7.5 F SDAD101 S 7.5 F SDAD101 S 10 F 2.5 5.0 5.0 7.5 7.5 10 500 500 500 500 500 500 0.90 0.58 0.50 0.45 0.38 0.30 SDAD101 H 2.5 F SDAD101 H 5.0 F SDAD101 H 7.5 F SDAD101 H 10 F SDAD101 H 15 F 2.5 5.0 7.5 10 15 500 500 500 500 500 1.80 1.06 0.90 0.76 0.60 Ifsm 50 C 100 C 2.00 70 1.30 70 0.90 20 1.00 70 0.75 20 0.58 20 High Current Versions 4.00 150 2.60 150 2.00 150 1.50 150 1.06 30 Maximum Forward Voltage Drop Vf (V) If (A) 25 C Maximum Leakage Current @PIV Replacement Part Number Ir (uA) 25 C 6.0 12.0 12.0 18.0 18.0 23.0 0.90 0.60 0.50 0.40 0.40 0.30 10 10 5 10 5 5 UFB-2.5 UFB-5 UFS-5 UFB-7.5 UFS-7.5 UFS-10 3.6 6.1 9.0 11.8 17.2 1.8 1.1 0.9 0.8 0.5 10 10 10 10 10 ----------- SDAD101 Package: NOTES: 1/ 2/ 3/ 4/ For Ordering Information, Price, Curves, and Availability- Contact Factory. Screening based on MIL-PRF-19500.Screening flows available on request. Unless Otherwise Specified, All Electrical Characteristics @25ºC. Tc = 50 ºC typical operation in oil. Tc = 75 ºC is typical ambient Ta = 25 ºC unheatsunk. 5/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp rec. to .25 Amp. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RA0041B DOC