SPMS506-01A Series 150 AMP DISCHARGE 60 AMP CHARGE BATTERY BYPASS POWER MODULE Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com FEATURES: Designer’s Data Sheet Part Number/Ordering Information SPMS506- Space Flight Proven Heritage High Charge/Discharge Current Low Forward Discharge Voltage (VFD) Guaranteed Minimum Charge Voltage (VFC) Compact and Rugged Construction Offering Weight and Space Savings Very Low Mechanical Stress and Thermal Resistance Hermetic Sealed Discrete Elements Excellent Thermal Management Available with Male or Female and Inch or Metric Terminals TX, TXV, and Space Level Screening Available 1/ __ __ │ │ │ │ │ └ └ Screening 2/ __ = Not Screened TX = TX Level TXV = TXV S = S Level Thread Type 01A = Inch, Male 01AF = Inch, Female 01AM = Metric, Male 01AFM = Metric, Female MAXIMUM RATINGS CHARACTERISTIC SYMBOL VALUE UNIT Discharge Current (Schottkys) ID 150 Amps Charge Current (Rectifiers) IC 60 Amps Discharge Surge Current (Non-Repetitive, t = 8.3 msec Pulse) IDP 750 Amps TOP & TSTG -65 to +150 °C θJBd θJBc 0.75 0.45 °C/W Storage & Operating Temperature Range Thermal Resistance, Junction to Base ASPM Discharging Leg Charging Leg ELECTRICAL SCHEMATIC NOTES: 1/ For Ordering Information, Price, Operating Curves, and Availability Contact Factory. 2/ Screening per MIL-PRF-19500. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: PM0024B DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS RATING Forward Discharge Voltage (TA = 25°C ) Forward Discharge Voltage ( IF = 50A ) Forward Discharge Voltage (TA = 25°C ) Forward Discharge Voltage ( IF = 30A ) SPMS506-01A Series SYMBOL MIN MAX UNIT IF = 20A IF = 50A IF = 100A IF = 150A VFD1 VFD2 VFD3 VFD4 --------- .450 .550 .680 .800 Volts TA = -55°C TA = +125°C VFD5 VFD6 ----- .650 .480 Volts IF = 350mA IF = 5A IF = 15A IF = 30A IF = 60A VCD1 VCD2 VCD3 VCD4 VCD5 1.65 --------- --2.9 3.5 4.2 5.3 Amps TA = -55°C TA = +125°C VCD6 VCD7 ----- 4.4 4.0 Amps RINSUL 1.0 --- GΩ Insulation Resistance (All terminals to base @ 1,000V) PACKAGE OUTLINE: ASPM THREAD SIZE TYPE Part Number Thread Type Thread Size SPMS506-01A INCH - MALE 6-32 UNC-2A SPMS506-01AF INCH - FEMALE 6-32 UNC-2B SPMS506-01AM METRIC - MALE M4 x 0.7 SPMS506-01AFM METRIC - FEMALE M4 x 0.7 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Tolerances (Unless Specified) .XX ±.03” .XXX ±.010” DATA SHEET #: PM0024B DOC