P600A-P600M 50V-1000V GENERAL PURPOSE RECTIFIERS Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @TA = 60°C 6.0A Symbol P600A P600B P600D P600G P600J P600K P600M Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 6.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 400 A Forward Voltage @IF = 6.0A VFM 1.0 V @TA = 25°C @TA = 100°C IRM 5.0 1.0 µA mA Cj 150 pF RJA 20 K/W Tj -50 to +150 °C TSTG -50 to +150 °C Peak Reverse Current At Rated DC Blocking Voltage Typical Junction Capacitance (Note 2) Typical Thermal Resistance Junction to Ambient (Note 1) Operating Temperature Range Storage Temperature Range *Glass passivated forms are available upon request Note: 1. Leads maintained at ambient temperature at a distance of 9.5mm from the case 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. E-mail: [email protected] 1 of 2 Web Site: www.taychipst.com P600A THRU P600M 50V-1000V 6.0A GENNERAL PURPOSE RECTIFIERS 100 IO, AVERAGE RECTIFIED CURRENT (A) 7 6 5 4 3 2 1 0 0 25 50 75 100 125 150 175 200 IF, INSTANTANEOUS FORWARD CURRENT (A) 8 1.0 Tj = 25ºC Pulse Width = 300 µs 2% Duty Cycle 0.1 0 0.2 0.6 1.0 1.4 TA , AMBIENT TEMPERATURE (ºC) VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 1 Forward Current Derating Curve Fig. 2, Typical Forward Characteristics 500 1000 400 Cj, CAPACITANCE (pF) IFSM , PEAK FORWARD SURGE CURRENT (A) 10 300 200 1.8 Tj = 25°C f = 1MHz 100 100 8.3ms Single Half Sine-Wave JEDEC Method 0 10 1 100 10 1 NUMBER OF CYCLES AT 60Hz 10 VR, REVERSE VOLTAGE (V) Fig. 3 Maximum Non-Repetitive Peak Forward Surge Current Fig. 4 Typical Junction Capacitance E-mail: [email protected] 2 of 2 100 Web Site: www.taychipst.com