RoHS Power Chip Shielded Inductors Dimensions: Allied Part Number Inductance Tolerance (µH) (%) Test Freq. KHz, 0.5V PCSLF0628 Inches (mm) RDC (Ω) ±20% IDC (A) Itemp (A) Max. Features • • • • Shielded SMD Power Inductor Suitable for high current applications Low profile Low Power loss and High current PCSLF0628-4R7M-RC 4.7 20 1 .028 1.6 2.5 PCSLF0628-5R4M-RC 5.4 20 1 .033 1.5 2.0 PCSLF0628-6R8M-RC 6.8 20 1 .035 1.5 2.2 PCSLF0628-100M-RC 10 20 1 .053 1.3 1.8 PCSLF0628-150M-RC 15 20 1 .075 1.0 1.4 PCSLF0628-220M-RC 22 20 1 .104 .77 1.3 PCSLF0628-330M-RC 33 20 1 .148 .69 1.1 Inductance Range: 4.7µH to 100µH Tolerance: 20% over entire range PCSLF0628-470M-RC 47 20 1 .210 .59 0.92 Operating Temp: -40ºC ~ +85ºC PCSLF0628-680M-RC 68 20 1 .290 .50 0.78 PCSLF0628-101M-RC 100 20 1 .430 .42 0.64 IDC: Current at which inductance drops by 30% of intial value Itemp: Current at which the temperature has risen 25ºC from initial Temp. All specifications subject to change without notice. Electrical Resistance to Soldering Heat Pre-Heat 150ºC, 1 minute. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC ± 5ºC for 10 sec. ± 1 sec. Test Equipment (L): HP 4192A LF Impedance Analyzer (RDC): Chen Hwa 502BC (IDC): HP4284A + HP42841A Physical Packaging: 1000 pieces per 13 inch reel. Marking: EIA Inductance Code 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 1512/16/08 www.alliedcomponents.com