RoHS PCSLF1045 Power Chip Shielded Inductors Dimensions: Features • Shielded Power Inductor • Designed ferrite cover provides magnetic shielding • Provides extremely low DCR and Hi rating current Inches (mm) Allied Part Number Inductance (uH) Tolerance (%) Test Freq. KHz,0.5V RDC (Ω)±20% IDC (A) Itemp (A) Max. PCSLF1045-100M-RC 10 20 1 .0364 3.0 2.5 PCSLF1045-150M-RC 15 20 1 .0472 2.4 2.2 PCSLF1045-220M-RC 22 20 1 .0591 2.1 1.9 PCSLF1045-330M-RC 33 20 1 .0815 1.6 1.7 PCSLF1045-470M-RC 47 20 1 0.10 1.4 1.5 PCSLF1045-680M-RC 68 20 1 0.14 1.2 1.3 PCSLF1045-101M-RC 100 20 1 0.20 1.0 1.1 PCSLF1045-151M-RC 150 20 1 0.35 .79 .81 PCSLF1045-221M-RC 220 20 1 0.47 .65 .70 PCSLF1045-271M-RC 270 20 1 0.58 .58 .60 PCSLF1045-331M-RC 330 20 1 0.68 .54 .58 PCSLF1045-471M-RC 470 20 1 1.03 .47 .47 PCSLF1045-681M-RC 680 20 1 1.60 .38 .38 PCSLF1045-102M-RC 1000 20 1 2.80 .32 .29 PCSLF1045-152M-RC 1500 20 1 3.40 .22 .26 Electrical Inductance Range: 10µH to 1500µH Tolerance: 20% over entire range Itemp current: Value obtained when current flows and the temperature has risen 30ºC Operating Temp: -40ºC ~ +85ºC IDC: Current at which inductance drops by 10% of intial value Itemp: Current at which the temperature has risen 30ºC from initial Temp. Resistance to Soldering Heat Pre-Heat 150ºC, 1 minute. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC ± 5ºC for 10 sec. ± 1 sec. Test Equipment (L): HP 4192A (RDC): Chen Hwa 502BC (IDC): HP4284A + HP42841A / Chen Hwa 1061 + 301A Physical Packaging: 500 pieces per 13 inch reel. Marking: EIA Inductance Code All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 7/20/09 15 www.alliedcomponents.com