3453 DIGITAL MΩ HiTESTER Field measuring instruments 125 V/ 40MΩ 250 V/2000 MΩ 500 V/2000 MΩ 1000 V/4000 MΩ 4 ranges Insulation resistance measurement Actual-size For general-purpose measurement Insulation resistance, AC voltage, low resistance (continuity) measurement http://www.hioki.co.jp/ HIOKI company overview, new products, environmental considerations and other information are available on our website. For efficient insulation measurement! Myriad functions for various measurement needs. Accurate Ve r s a t i l e digital display ● Insulation measurement through sight and sound! The reference value is set separately for each measurement range. Moving-average processing (averaging for two seconds) suppresses dispersion of display, ensuring more accurate and stable measurement. The logarithmic scale bar graph display from 0 to 4000 MΩ offers the feel of an analog meter. The bar graph displays the voltage level of the object being measured, showing either that the object is at a line voltage or how the object discharges after being charged during measurement. Test voltage ● Memorizes on the spot! (Memorizes up to 20 data points.) ● Recognizes variations of resistance! Automatically displays the resistance value at one minute after commencing measurement . ● Ability to measure AC voltage and low resistance (continuity)! Optional 9185 TEST LEADS feel like conventional testers. First effective range Insulation resistance Second effective range Accuracy Voltage with no load 125 V DC 0.125 MΩ Short circuit current (continuity) 500 V DC 1000 V DC 0.250 MΩ 0.500 MΩ 2.000 MΩ 1.2 mA max. ∞ to center, ∞ to 0 MΩ within 5 s (within accuracy range) Response time AC voltage 250 V DC 4.000 / 40.00 MΩ 4.000 / 40.00 / 400.0 / 2000 / 4000 (1000V range only) MΩ 0.100 to 10.00 MΩ 0.200 to 20.00 MΩ 0.200 to 50.00 MΩ 0.200 to 999 MΩ 0 to 0.099 MΩ 0 to 0.199 MΩ 0 to 0.199 MΩ 0 to 0.199 MΩ 10.01 to 40.00 MΩ 20.01 to 2000 MΩ 50.01 to 2000 MΩ 1000 to 4000 MΩ First effective range: ±2%rdg. ±3 dgt. Second effective range: ±2 %rdg. ±6 dgt. (0 to first effective range), ±5 %rdg. ( more than first effective range) Not more than 1.2 times rated measurement voltage Min. resistance measurement value*2 Low resistance ● Improved safety A line voltage warning lamp blinks when the voltage exceeds about 40 V. Accuracy at 23˚C±5˚C (73˚F±9˚F), 90 % rh or less Insulation test voltage Measurement range*1 Reference value (MΩ) 125 V 0.1 / 0.2 / 1 / 2 /3 / 5 / 10 / 20 250 V/500 V 0.1 / 0.2 / 0.4 / 1 / 2 / 3 / 5 / 10 / 20 / 30 / 50 / 100 / 200 / 500 / 1000 / 2000 1000 V 1 / 2 / 3 / 5 / 10 / 20 / 30 / 50 / 100 / 200 / 500 / 1000 / 2000 Back-lighting liquid crystal display enables reading in dark areas. ■ 3453 specifications uses in the field 0.6 mA max. Measurement range: 0 to 400.0 Ω, aural warning below 30 Ω Accuracy: ±2% rdg. ±8dgt. Open terminal voltage: 4 V max. Response time: 2 s max. Measurement range: 0 to 600 V Accuracy: ±2% rdg. ±8dgt. Frequency range: 50 to 60 Hz Input impedance: 170 kΩ ●Functions: Insulation resistance mode; comparator, memory (20 data), measurement value hold, auto discharge, bar graph display (measure switch ON: insulation resistance; measure switch OFF: voltage across measurement terminals), auto display of measurement value 1 minute after measurement start, other measurement modes, live wire warning (when voltage of 40 V±20 V exists across measurement terminals), battery indicators, auto power save ●Display: semi-transparent LCD, "4000" count, with backlight, bar graph 30 dots ●Display update rate: 2 times / second ●Load protection: 10 s: 600 Vrms (AC V range 720 Vrms) ●Safety standard: EN61010-1 measurement category III 600 V ●EMC standard: EN61326-1 ●Ambient temperature range for use: 0 to 40˚C (32˚F to 104˚F), 90 %rh or less (no condensation) ●Ambient temperature range for storage: -20 to 50˚C ( - 4˚F to 122˚F) , 90 %rh or less (no condensation) ●Power source: R6P manganese battery ✕ 4 or LR6 alkaline battery ✕ 4 ●Dimensions and Mass: Approx. 155 (6.1") W ✕ 98 (3.9" ) H ✕ 80 (3.2" ) D mm; Approx. 500 g (17.7 oz.) (with display cover attached) 3453 DIGITAL MΩ HiTESTER (All include 9294 TEST PROBE, display cover and suspension band) *1. Measurement range shifts automatically. *2. Resistance value to maintain rated voltage. Accessories Store test probe. Lead length approx. 1.2 m (47.2") 9294 TEST PROBE Display cover The body is stackable during measurement. Options 90 mm (3.54") Lead length approx. 1.2 m (47.2") * 9288 BREAKER PIN 9289 TEST PROBE To be attached on the top of 9294 (Red) DISTRIBUTED BY HEAD OFFICE : 81 Koizumi, Ueda, Nagano, 386-1192, Japan TEL +81-268-28-0562 / FAX +81-268-28-0568 E-mail: os-com@ hioki.co.jp HIOKI USA CORPORATION : 6 Corporate Drive, Cranbury, NJ 08512 USA TEL +1-609-409-9109 / FAX +1-609-409-9108 E-mail: hioki@ hiokiusa.com Shanghai Representative Office : 1704 Shanghai Times Square Office 93 Huaihai Zhong Road Shanghai, 200021, P.R.China TEL +86-21-6391-0090, 0092 FAX +86-21-6391-0360 E-mail: [email protected] All information correct as of Dec. 22, 2004. All specifications are subject to change without notice. 3453E6-4ZE-02K Printed in Japan