. 4 7.62 ISA20 1 2 1 2 6 5 3 4 6.4 ISA20 5 0 Dimensions in mm 6 3 8.6 8.8 DESCRIPTION 7.62 The ISA20 is a 1-Form A solid state relay in a 6 pin DIL package. The ISA20 utilises MOSFET technology that is optically coupled to a highly efficient GaAlAs infrared light emitting diode. FEATURES l Options :10mm lead spread - add G after part no. Surface mount - add SM after part no. Tape&reel - add SMT&R after part no. l High operating Current (200mA) l High Isolation Voltage (3.75kVRMS ) l No moving parts l High reliability l Arc-Free without snubber circuits l All electrical parameters 100% tested l Custom electrical selections available APPLICATIONS l Telecommunications l Industrial systems controllers l Measuring instruments l Signal transmission between systems of different potentials and impedances 3.4 6.9 3.9 8.2 0.47 5.08 ABSOLUTEMAXIMUMRATINGS (25°C unless otherwise specified) Storage Temperature -40°C to + 100°C Operating Temperature -40°C to + 85°C Lead Soldering Temperature (1/16 inch (1.6mm) from case for 10 secs) 260°C INPUT DIODE Forward Current Reverse Voltage 50mA 5V OUTPUT MOSFET OPTION SM OPTION G SURFACE MOUNT 0.6 0.1 10.46 9.86 1.25 0.75 7.62 200V 200mA 400mA 0.26 10.16 ISOCOM COMPONENTS LTD Unit 25B, Park View Road West, Park View Industrial Estate, Brenda Road Hartlepool, TS25 1YD England Tel: (01429)863609 Fax : (01429) 863581 e-mail [email protected] http://www.isocom.com 6/12/06 Load Voltage ( AC peak or DC ) Continous Load Current Peak Current ( 10mS ) ISOCOM COMPONENTS ASIA LTD Hong Kong Office, 1712-1713 Laurels Industrial Centre, 32 Tai Yau Street, San Po Kong, Kowloon, Hong Kong. Tel: +852 2995 9217 Fax : +852 8161 6292 e-mail [email protected] DC93070 ELECTRICAL CHARACTERISTICS ( TA= 25°C Unless otherwise noted ) PARAMETER Input MIN Forward Voltage (VF) TYP MAX UNITS TEST CONDITION 1.0 Reverse Current (IR) Output On state Resistance ( Ron ) 6.0 Off state Leakage Current (ILK) Coupled 1.4 V IF = 10mA 10 µA VR = 5V 10.0 Ohm IF = 10mA, IL = 200mA 1 uA IF = 0mA, IV = 200V Turn-On Time ( Ton ) 0.2 0.5 mS IF = 10mA, IL = 200mA Turn-Off Time ( Toff ) 0.03 0.3 mS IF = 10mA, IL = 200mA Ouput Capacitance 100 pF f = 1MHz Capacitance 1.0 pF f = 1MHz Isolation Voltage 3750 Vrms 1 minute ( Note 1 ) Isolation Resistance 5 Gohm DC= 500V ( Note 1 ) Note 1 Measured with input leads shorted together and output leads shorted together. Note 2 Special Selections are available on request. Please consult the factory. 6/12/06 DC93070