MARKTECH TLRK1100C

TL(RK,RMK,SK,OK,YK)1100C(T11)
Tentative
TLRK1100C(T11), TLRMK1100C(T11), TLSK1100C(T11)
TLOK1100C(T11), TLYK1100C(T11)
・本資料は、製品の紹介を目的とした技術検討資料です。最終仕様段階で特性内容
の変更を伴う場合もあります。製品設計を行う場合は、営業部門に最終仕様を
ご確認頂けます様お願い致します。
・This material is technological examination material to aim at the product
introduction. The change in the content of the characteristic might
be accompanied at the final specification process. The final specification
will be able to be gotten in the brokerage department when the product is
designed and to get the confirmation.
HOL-0206
1
2007-04-19
TL(RK,RMK,SK,OK,YK)1100C(T11)
Tentative
TOSHIBA LED Lamps
Preliminary
TLRK1100C(T11), TLRMK1100C(T11), TLSK1100C(T11),
TLOK1100C(T11), TLYK1100C(T11)
Panel Circuit Indicator
Unit: mm
•
Surface-mount devices
•
3.2 (L) × 2.8 (W) × 1.9 (H) mm
•
Flat-top type
•
InGaAℓP LEDs
•
High luminous intensity
•
Low drive current, high-intensity light emission
•
Colors: Red, Orange, Yellow
•
Pb-free reflow soldering is possible
•
Applications: automotive use, message signboards, backlighting
etc.
•
Standard embossed tape packing: T11 (2000/reel)
8-mm tape reel
Color and Material
Product Name
Color
TLRK1100C
Red
TLRMK1100C
Red
TLSK1100C
Red
TLOK1100C
Orange
TLYK1100C
Yellow
HOL-0206
JEDEC
―
JEITA
―
TOSHIBA
Material
4-3R1
Weight: 0.035 g (typ.)
InGaAℓP
2
2007-04-19
TL(RK,RMK,SK,OK,YK)1100C(T11)
Tentative
Maximum Ratings (Ta = 25°C)
Product Name
Forward Current
IF (mA)
Please see Note 1
Reverse Voltage
VR (V)
40
4
Power Dissipation
PD (mW)
Operation
Temperature
Topr (°C)
Storage
Temperature
Tstg (°C)
−40~100
−40~100
TLRK1100C
TLRMK1100C
TLSK1100C
96
TLOK1100C
TLYK1100C
100
Note 1: Forward current derating
IF – Ta
Allowable forward current
IF (mA)
50
40
30
20
10
0
0
20
40
60
80
100
120
Ambient temperature Ta (°C))
Electrical Characteristics (Ta = 25°C)
Product Name
Min
Typ.
Max
TLRK1100C
1.8
2.1
2.4
TLRMK1100C
1.8
2.1
2.4
TLSK1100C
1.8
2.1
2.4
TLOK1100C
1.8
2.1
2.4
TLYK1100C
1.9
2.2
2.5
Unit
HOL-0206
Reverse Current
IR
Forward Voltage VF
V
IF
Max
VR
20
10
4
mA
µA
V
3
2007-04-19
TL(RK,RMK,SK,OK,YK)1100C(T11)
Tentative
Optical Characteristics–1 (Ta = 25°C)
Product Name
Luminous Intensity IV
Available Iv rank
Min
Typ.
Max
IF
Please see Note 2
100
300
500
20
RA / SA / TA
TLRMK1100C
160
400
800
20
SA / TA / UA
TLSK1100C
250
500
1250
20
TA / UA / VA
TLOK1100C
250
500
1250
20
TA / UA / VA
TLYK1100C
160
400
800
20
SA / TA / UA
Unit
mcd
mcd
mcd
mA
mA
TLRK1100C
Note 2: The specification on the above table is used for Iv classification of LEDs in Toshiba facility.
Each reel includes the same rank LEDs. Let the delivery ratio of each rank be unquestioned.
Rank
Luminous Intensity IV
Min
Max
RA
100
200
SA
160
320
TA
250
500
UA
400
800
VA
630
1250
Unit
mcd
mcd
Optical Characteristics–2 (Ta = 25°C)
Emission Spectrum
Product Name
Peak Emission
Wavelength λp
Min
Typ.
Max
∆λ
Dominant Wavelength λd
Typ.
Min
Typ.
Max
TLRK1100C
⎯
644
⎯
14
624
630
638
TLRMK1100C
⎯
636
⎯
14
620
626
634
TLSK1100C
⎯
623
⎯
14
607
613
621
TLOK1100C
⎯
612
⎯
14
599
605
613
TLYK1100C
⎯
592
⎯
13
583
590
595
Unit
nm
nm
nm
IF
20
mA
The cautions
•
This product is designed as a general display light source usage, and it has applied the measurement standard
that matched with the sensitivity of human's eyes. Therefore, it is not intended for usage of functional
application (ex. Light source for sensor, optical communication and etc) except general display light source.
HOL-0206
4
2007-04-19
TL(RK,RMK,SK,OK,YK)1100C(T11)
Tentative
TLRK1100C
IF – V F
(mcd)
1000
Luminous intensity
Forward current
(typ.)
Ta = 25°C
500
300
IV
30
IF
(mA)
IV – IF
(typ.)
100
10
3
1
1.6
1.8
2.0
2.2
Forward voltage
VF
100
50
30
10
1
2.4
(V)
IV – Tc
3
5
10
30
Forward current
IF
50
100
(mA)
Wavelength characteristic
(typ.)
10
(typ.)
1.0
Relative luminous intensity
Relative luminous intensity
IV
IF = 20 mA
5
3
1
0.5
0.3
0.1
−25
0
25
50
Case temperature
75
Tc
Ta = 25°C
0.8
0.6
0.4
0.2
0
580
100
(°C)
600
620
640
Wavelength
660
λ
680
700
(nm)
Radiation pattern
Ta = 25°C
(typ.)
20°
10°
0°
10°
30°
20°
30°
40°
40°
50°
50°
60°
60°
70°
70°
80°
90°
HOL-0206
80°
0
0.2
0.4
0.6
0.8
90°
1.0
5
2007-04-19
TL(RK,RMK,SK,OK,YK)1100C(T11)
Tentative
TLRMK1100C
IF – V F
(mcd)
1000
Luminous intensity
Forward current
(typ.)
Ta = 25°C
500
300
IV
30
IF
(mA)
IV – IF
(typ.)
100
10
3
1
1.6
1.8
2.0
2.2
Forward voltage
VF
100
50
30
10
1
2.4
(V)
IV – Tc
3
10
30
Forward current
IF
50
100
(mA)
Wavelength characteristic
(typ.)
10
5
(typ.)
1.0
Ta = 25°C
Relative luminous intensity
Relative luminous intensity
IV
IF = 20 mA
5
3
1
0.5
0.3
0.1
−25
0
25
50
Case temperature
75
Tc
0.8
0.6
0.4
0.2
0
580
100
(°C)
600
620
640
Wavelength
660
λ
680
700
(nm)
Radiation pattern
Ta = 25°C
(typ.)
20°
10°
0°
10°
30°
20°
30°
40°
40°
50°
50°
60°
60°
70°
70°
80°
90°
HOL-0206
80°
0
0.2
0.4
0.6
0.8
90°
1.0
6
2007-04-19
TL(RK,RMK,SK,OK,YK)1100C(T11)
Tentative
TLSK1100C
IF – V F
(mcd)
1000
30
(typ.)
Ta = 25°C
500
300
IV
Luminous intensity
Forward current
IF
(mA)
IV – IF
(typ.)
100
10
3
1
1.6
1.8
2.0
2.2
Forward voltage
VF
100
50
30
10
1
2.4
(V)
IV – Tc
3
10
30
Forward current
IF
50
100
(mA)
Wavelength characteristic
(typ.)
10
5
(typ.)
1.0
Ta = 25°C
Relative luminous intensity
Relative luminous intensity
IV
IF = 20 mA
5
3
1
0.5
0.3
0.1
−25
0
25
50
Case temperature
75
Tc
0.8
0.6
0.4
0.2
0
560
100
(°C)
580
600
620
Wavelength
640
λ
660
680
(nm)
Radiation pattern
Ta = 25°C
(typ.)
20°
10°
0°
10°
30°
20°
30°
40°
40°
50°
50°
60°
60°
70°
70°
80°
90°
HOL-0206
80°
0
0.2
0.4
0.6
0.8
90°
1.0
7
2007-04-19
TL(RK,RMK,SK,OK,YK)1100C(T11)
Tentative
TLOK1100C
IF – V F
IV – IF
(typ.)
(mcd)
1000
Luminous intensity
Forward current
(typ.)
Ta = 25°C
500
300
IV
30
IF
(mA)
100
10
3
1
1.6
1.8
2.0
2.2
Forward voltage
VF
100
50
30
10
1
2.4
(V)
IV – Tc
5
10
30
Forward current
IF
50
100
(mA)
Wavelength characteristic
(typ.)
10
3
(typ.)
1.0
Ta = 25°C
Relative luminous intensity
Relative luminous intensity
IV
IF = 20 mA
5
3
1
0.5
0.3
0.1
−25
0
25
50
Case temperature
75
Tc
0.8
0.6
0.4
0.2
0
540
100
(°C)
560
580
600
Wavelength
620
λ
640
660
(nm)
Radiation pattern
Ta = 25°C
(typ.)
20°
10°
0°
10°
30°
20°
30°
40°
40°
50°
50°
60°
60°
70°
70°
80°
90°
HOL-0206
80°
0
0.2
0.4
0.6
0.8
90°
1.0
8
2007-04-19
TL(RK,RMK,SK,OK,YK)1100C(T11)
Tentative
TLYK1100C
IF – V F
(mcd)
1000
Luminous intensity
Forward current
(typ.)
Ta = 25°C
500
300
IV
30
IF
(mA)
IV – IF
(typ.)
100
10
3
1
1.6
1.8
2.0
2.2
Forward voltage
VF
100
50
30
10
1
2.4
(V)
IV – Tc
5
10
30
Forward current
IF
50
100
(mA)
Wavelength characteristic
(typ.)
10
3
(typ.)
1.0
Ta = 25°C
Relative luminous intensity
Relative luminous intensity
IV
IF = 20 mA
5
3
1
0.5
0.3
0.1
−25
0
25
50
Case temperature
75
Tc
0.8
0.6
0.4
0.2
0
540
100
(°C)
560
580
600
Wavelength
620
λ
640
660
(nm)
Radiation pattern
Ta = 25°C
(typ.)
20°
10°
0°
10°
30°
20°
30°
40°
40°
50°
50°
60°
60°
70°
70°
80°
90°
HOL-0206
80°
0
0.2
0.4
0.6
0.8
90°
1.0
9
2007-04-19
TL(RK,RMK,SK,OK,YK)1100C(T11)
Tentative
Packaging
These LED devices are packed in an aluminum envelope with a silica gel and a moisture indicator to avoid
moisture absorption. The optical characteristics of the devices may be affected by exposure to moisture in the air
before soldering and they should therefore be stored under the following conditions:
1. This moisture proof bag may be stored unopened within 12 months at the following conditions.
Temperature: 5°C~30°C
Humidity: 90% (max)
2. After opening the moisture proof bag, the devices should be assembled within 168 hours in an environment of
5°C to 30°C/60% RH or below.
3. If upon opening, the moisture indicator card shows humidity 30% or above (Color of indication changes to
pink) or the expiration date has passed, the devices should be baked in taping with reel.
After baking, use the baked devices within 72 hours, but perform baking only once.
Baking conditions: 60±5°C, for 12 to 24 hours.
Expiration date: 12 months from sealing date, which is imprinted on the same side as this label affixed.
4. Repeated baking can cause the peeling strength of the taping to change, then leads to trouble in mounting.
Furthermore, prevent the devices from being destructed against static electricity for baking of it.
5. If the packing material of laminate would be broken, the hermeticity would deteriorate. Therefore, do not
throw or drop the packed devices.
Mounting Method
Soldering
•
Reflow soldering (example)
Temperature profile for Pb soldering (example)
Temperature profile for Pb-free soldering (example)
5 s max(*)
10 s max (*)
(*)
(*)
140~160°C max(*)
(*)
4°C/s max(*)
4°C/s max
60~120 s max(*)
Time
•
•
•
•
•
260°C max
Package surface
temperature (°C)
Package surface
temperature (°C)
240°C max
4°C/s max(*)
max(*)
150~180°C 230°C
4°C/s max(*)
max(*)
60~120 s
Time
(s)
30~50s max(*)
(s)
The products are evaluated using above reflow soldering conditions. No additional test is performed exceed the
condition (i.e. the condition more than (*)MAX values) as a evaluation. Please perform reflow soldering under
the above conditions.
Please perform the first reflow soldering with reference to the above temperature profile and within 168 h of
opening the package.
Second reflow soldering
In case of second reflow soldering should be performed within 168 h of the first reflow under the above
conditions.
Storage conditions before the second reflow soldering: 30°C, 60% RH (max)
Make any necessary soldering corrections manually.
(only once at each soldering point)
Soldering iron : 25 W
Temperature : 300°C or less
Time
: within 3 s
If the products need to be performed by other soldering method (ex. wave soldering), please contact Toshiba
sales representative.
Recommended soldering pattern
1.65
Unit: mm
1.15
1.65
2.41
HOL-0206
10
2007-04-19
TL(RK,RMK,SK,OK,YK)1100C(T11)
Tentative
Cleaning
When cleaning is required after soldering, Toshiba recommends the following cleaning solvents.
It is confirmed that these solvents have no effect on semiconductor devices in our dipping test (under the
recommended conditions). In selecting the one for your actual usage, please perform sufficient review
on washing condition, using condition and etc.
ASAHI CLEAN AK-225AES
KAO CLEAN TROUGH 750H
PINE ALPHA ST-100S
TOSHIBA TECHNOCARE
(FRW-17, FRW-1, FRV-100)
: (made by ASAHI GLASS)
: (made by KAO)
: (made by ARAKAWA CHEMICAL)
: (made by GE TOSHIBA SILICONES)
Precautions when Mounting
Do not apply force to the plastic part of the LED under high-temperature conditions.
To avoid damaging the LED plastic, do not apply friction using a hard material.
When installing the PCB in a product, ensure that the device does not come into contact with other cmponents.
Tape Specifications
1. Product number format
The type of package used for shipment is denoted by a symbol suffix after the product number. The
method of classification is as below. (this method, however does not apply to products whose electrical
characteristics differ from standard Toshiba specifications)
(1) Tape Type: T11 (4-mm pitch)
(2) Example
TLYK1100C (T11)
Tape type
Toshiba product No.
2.
Tape dimensions
Unit: mm
Symbol
Dimension
Tolerance
Symbol
Dimension
Tolerance
D
1.5
+0.1/−0
P2
2.0
±0.05
E
1.75
±0.1
W
8.0
±0.3
P0
4.0
±0.1
P
4.0
±0.1
t
0.3
±0.05
A0
2.9
±0.1
F
3.5
±0.05
B0
3.7
±0.1
D1
1.5
±0.1
K0
2.3
±0.1
K0
P0
D
t
P2
E
F
W
B0
P
D1
Polarity
A0
HOL-0206
11
2007-04-19
TL(RK,RMK,SK,OK,YK)1100C(T11)
Tentative
3. Reel dimensions
Unit: mm
9 ± 0.3
φ60
2 ± 0.5
φ13
φ44
+0
180 −4
11.4 ± 1.0
4. Leader and trailer sections of tape
40 mm or more
40 mm or more
(Note 1)
(Note 2)
Leading part: 190 mm (min)
Note1: Empty trailer section
Note2: Empty leader section
HOL-0206
12
2007-04-19
TL(RK,RMK,SK,OK,YK)1100C(T11)
Tentative
5. Packing form
(1) Packing quantity
Reel
2,000 pcs
Carton
10,000 pcs
(2) Packing form: Each reel is sealed in an aluminum pack with silica gel.
6. Label format
(1) Example: TLYK1100C (T11)
P/N:
TOSHIBA
TYPE
TLYK1100C
ADDC
(T11)
Q’TY
Lot Number
Key code for TSB
(RANK SYMBOL)
32C
2,000 pcs
2000
Use under 5-30degC/60%RH within 168h
SEAL DATE:
DIFFUSED IN *****
ASSEMBLED IN *****
[[G]]/RoHS COMPATIBLE
*Y3804xxxxxxxxxxxxxxxxx*
(2) Label location
• Reel
• Carton
Tape feel direction
Label position
Label position
• The aluminum package in which the reel is supplied also has the label attached to
center of one side.
HOL-0206
13
2007-04-19
TL(RK,RMK,SK,OK,YK)1100C(T11)
Tentative
RESTRICTIONS ON PRODUCT USE
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break,
cut, crush or dissolve chemically.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patent or patent rights of
TOSHIBA or others.
HOL-0206
14
2007-04-19